The URL can be used to link to this page

R20-097 1 RESOLUTION NO. R20-097 2 3 A RESOLUTION OF THE CITY OF BOYNTON BEACH, FLORIDA, 4 APPROVING AND AUTHORIZING THE CITY MANAGER TO SIGN 5 A PIGGY-BACK AGREEMENT WITH ETR,L.L.C.,AND APPROVE 6 THE ISSUANCE OF A PURCHASE ORDER FOR REPLACEMENT 7 FIRE RESCUE VEHICLE IN THE ESTIMATED AMOUNT OF 8 $358,438.00 BY UTILIZING THE FLORIDA SHERIFFS 9 ASSOCIATION CONTRACT FS20-VEF 14.02; AND PROVIDING AN 10 EFFECTIVE DATE. 11 12 13 WHEREAS, the Fleet Manager recommends the purchase of one (1) replacement 14 vehicle for Fire/Rescue which will be used throughout the City to provide services to City 15 residents; and 16 WHEREAS, the City Commission of the City of Boynton Beach, upon the 17 recommendation of staff, deems it in the best interest of the citizens and residents of the City 18 of Boynton Beach to approve and authorizes the City Manager to sign a piggy back agreement 19 and approve the issuance of a purchase order which approval shall be subject to the final 20 approval by the City Attorney, for replacement Fire Rescue vehicle in the estimated amount 21 of$358,438.00 by utilizing the Florida Sheriffs Association Contract FS20-VEF 14.02. 22 NOW, THEREFORE, BE IT RESOLVED BY THE CITY COMMISSION OF 23 THE CITY OF BOYNTON BEACH, FLORIDA, THAT: 24 Section 1.The foregoing"Whereas" clauses are hereby ratified and confirmed as being 25 true and correct and are hereby made a specific part of this Resolution upon adoption hereof. 26 Section 2. The City Commission of the City of Boynton Beach hereby approves 27 and authorizes the City Manager to execute a piggy back agreement and approve the issuance 28 of a purchase order, subject to the final approval by the City Attorney, for replacement Fire 29 Rescue vehicle in the estimated amount of $358,438.00 by utilizing the Florida Sheriffs 30 Association Contract FS20-VEF 14.02. 31 Section 3. A copy of the piggy-back Agreement and Purchase Order in substantial 32 form are attached hereto as Exhibits "A" and "B" respectively, and shall be executed by the 33 City Manager and other appropriate city officials once approved by the City Attorney. 34 Section 4. That this Resolution shall become effective immediately upon passage. 35 PASSED AND ADOPTED this 15t day of September, 2020. 36 CITY OF BOYNTON BEACH, FLORIDA 37 YES NO 38 39 Mayor—Steven B. Grant ✓ 40 41 Vice Mayor—Ty Penserga ✓ 42 43 Commissioner—Justin Katz ✓ 44 45 Commissioner—Woodrow L. Hay ✓ 46 47 Commissioner—Christina L. Romelus ✓ 48 49 VOTE S-L-e 50 ATTEST: 51 52 53 /.-11../ . 41-1111. 54 Cry' .1 Gibson, MMC 55 Ci Clerk 56 57 58 (Corporate Seal) ye- ; i dao - FIRE RESCUE VEHICLES AND OTHER EQUIPMENT CONTRACT This Agreement is made as of this_23 day of November, 2020 by and between ETR, LLC.,,a Florida limited liability company with a principal place of business at 212 Hickman Drive, Sanford, FL 32771 ("ETR" or "Vendor"), and THE CITY OF BOYNTON BEACH, a Florida municipal corporation,with a mailing address of Post Office Box 310, Boynton Beach, FL 33425 (the"City"). RECITALS WHEREAS, the City of Boynton Beach Fleet Manager is recommending replacement of a Fire Rescue truck; and WHEREAS, The City of Boynton Beach will be purchasing the following vehicle from ETR L.L.C. for one (1) International/ETR medium rescue for Fire/Rescue in the amount of $358,438.00 utilizing the FSA20-VEF 14.02 contract; and NOW THEREFORE,in consideration of the mutual covenants contained herein, and for other valuable consideration received, the receipt and sufficiency of which are hereby acknowledged,the parties agree as follows: AGREEMENT Section 1. The foregoing recitals are true and correct and are hereby incorporated in this Agreement. Section 2. The City and ETR agree that ETR shall provide with the same terms, conditions, specifications and pricing based on Florida Sheriffs Association contract, a copy of which is attached hereto as Exhibit"A", with the maximum anticipated annual expenditure under this contract expected to be$358,438.00,except as hereinafter provided: A. All references to Florida Sheriffs Association, shall be deemed as references to the City of Boynton Beach. B. All Notices to the City shall be sent to: Page 1 H:\CUSTOMER AMB-REM,AEV,WC,FRONTLINE\BOYNTON BEACH\2020 PROJECTSW-AEV MV 607 TYPE 1 PLAN B\BOYNTON CONTRACT I1 23 20\ETR Piggy-Back Agreement From First Purchase Ln September 2020.Docx City: Lori LaVerriere, City Manager City of Boynton Beach P.O. Box 310 Boynton Beach, Florida 33425 Telephone: (561) 742-6010/Facsimile: (561) 742-6090 Copy : James A. Cherof, City Attorney Goren,Cherof, Doody &Ezrol, PA. 3099 East Commercial Boulevard, Suite 200 Fort Lauderdale, FL 33308 Telephone: (954) 771-4500 Facsimile: (954) 771-4923 C. In addition to the City Purchase Order General Terms and Conditions and Supplemental Terms and Conditions, the following terms and conditions are hereby incorporated into the Agreement: Scrutinized Companies By execution of this Agreement, in accordance with the requirements of F.S. 287-135 and F.S.215.473,Vendor certifies that Vendor is not participating in a boycott of Israel.Vendor further certifies that Vendor is not on the Scrutinized Companies that Boycott Israel list, not on the Scrutinized Companies with Activities in Sudan List, and not on the Scrutinized Companies with Activities in the Iran Petroleum Energy Sector List, or has Vendor been engaged in business operations in Syria. Subject to limited exceptions provided in state law, the City will not contract for the provision of goods or services with any scrutinized company referred to above. Submitting a false certification shall be deemed a material breach of contract. The City shall provide notice, in writing, to Vendor of the City's determination concerning the false certification. Vendor shall have five (5) days from receipt of notice to refute the false certification allegation. If such false certification is discovered during the active Agreement term,Vendor shall have ninety(90)days following receipt of the notice to respond in writing and demonstrate that the determination of false certification was made in error. If Vendor does not demonstrate that the City's determination of false certification was made in error then the City shall have the right to terminate the Agreement and seek civil remedies pursuant to Section 287.135, Florida Statutes, as amended from time to time. D. Records shall be deleted in it's entirety and replaced with the following: The City is public agency subject to Chapter 119, Florida Statutes. The Vendor shall comply with Florida's Public Records Law. Specifically, the Vendor shall: Page 2 H:\CUSTOMER AMB-REM,AEV,WC,FRONTLINE\BOYNTON BEAC1-1\2020 PROJECTS\N-AEV MV 607 TYPE 1 PLAN B\BOYNTON CONTRACT 11 23 20\ETR Piggy-Back Agreement From First Purchase In September 2020.Docx 1) Keep and maintain public records required by the CITY to perform the service; 2) Upon request from the CITY's custodian of public records,provide the CITY with a copy of the requested records or allow the records to be inspected or copied within a reasonable time at a cost that does not exceed the cost provided in chapter 119, FIa. Stat. or as otherwise provided by law; 3) Ensure that public records that are exempt or that are confidential and exempt from public record disclosure requirements are not disclosed except as authorized by law for the duration of the Agreement term and, following completion of the contract, Vendor shall destroy all copies of such confidential and exempt records remaining in its possession once the Vendor transfers the records in its possession to the CITY; and 4) Upon completion of the contract,Vendor shall transfer to the CITY,at no cost to the CITY,all public records in Vendor's possession All records stored electronically by Vendor must be provided to the CITY, upon request from the CITY's custodian of public records, in a format that is compatible with the information technology systems of the CITY. 5) IF THE VENDOR HAS QUESTIONS REGARDING THE APPLICATION OF CHAPTER 119, FLORIDA STATUES, TO THE VENDOR'S DUTY TO PROVIDE PUBLIC RECORDS RELATING TO THIS CONTRACT, CONTACT THE CUSTODIAN OF PUBLIC RECORDS: CITY CLERK P.O. BOX 310 BOYNTON BEACH, FL, 33425 561-742-6061 CITYCLERK@BBFL.US Section 3. In the event that the Florida Sheriffs Association Contract is amended, or terminated, ETR shall notify the City within ten (10) days. In the event the Florida Sheriffs Association Agreement is amended or terminated prior to its expiration, this Agreement shall remain in full force and effect, and not be deemed amended or terminated, until specifically amended or terminated by the parties hereto. Section 4.ETR agrees that in the event it enters into a Contract for the same(or substantially similar) scope of services with another local government in Florida which contains a term or condition, including fees, charges or costs, which the City determines to be more favorable than the terms in this Contract, the parties shall enter into an Addendum to provide those terms to the City. Page 3 H:\CUSTOMER AMB-REM,ABY,WC,FRONTLINE\I3OYNTON BEACH\2020 PROJECTS\N-AEV MV 607 TYPE I PLAN B\BOYNTON CONTRACT 1123 201E1R Piggy-Back Agreement From First Purchase In September 2020.Docx Section 5. The insurance required shall require that the Certificate of Insurance name the City of Boynton Beach as an additional insured. Section 6. This Agreement will take effect once signed by both parties. This Agreement may be signed by the parties in counterparts which together shall constitute one and the same agreement among the parties. A facsimile signature shall constitute an original signature for all purposes. Section 7. In all other aspects,the terms and conditions of the Florida Sheriffs Association Contract are hereby ratified and shall remain in full force and effect under this Agreement, as provided by their terms. IN WITNESS OF THE FOREGOING,the parties have set their hands and seals the day and year first written above. CITY OF BOYNTON BEACH, FLORIDA ATTEST: . .'City B I,, . _ �_� eG _ Mi i LaVerriere, City Manager Crys 1 Gibson,MC, City Clerk y u o,� BOY APPR'% ED • . • FORM: /i i. A . ' Ai. . Ja Fes A. Cher Attorney ETR,LLC. (WITNESSES: i, _ 3C., .._:-T/ -QBY: A \\ Print 1 ame: Gerald Michaluk QOPIfY\ON-6 k ' 4 J Title: Managing Member Page 4 H:\CUSTOMER AMB-REM,AEV,WC,FRONTLINE\BOYNTON BEAC11\2020 PROJECTS\N-AEV MV 607 TYPE 1 PLAN 13\I3OYNCON CONTRACT 11 23 20\ETR Piggy-Back Agreement From First Purchase In September 2020.Docx EXHIBIT A CONTRACT BETWEEN FLORIDA SHERIFFS ASSOCIATION AND ETR,LLC., Page 5 H:\CUSTOMER AMB-REM,AEV,WC,FRONTLINE\BOYNTON BEACH12020 PROJECTSIN-AEV MV 607 TYPE 1 PLAN B\BOYNTON CONTRACT 1123 201ETR Piggy-Back Agreement From First Purchase In September 2020.Docx AcoRO® CERTIFICATE OF LIABILITY INSURANCE DATE(MMIDONYYY) kb.------ 11/18/2020 THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER.THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER,AND THE CERTIFICATE HOLDER. IMPORTANT: if the certificate holder Is an ADDITIONAL INSURED,the policy(ies)must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED,subject to the terms and conditions of the policy,certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder to lieu of such endorsement(s). PRODUCER CONTACT JD Fuiwiler&Co., Insurance PHO : Megan McGlohn PHONE N 5727 S Macadam (Arcc..No.Ear):503-977-5659 I(AM No):503-977-5859 Portland OR 97239 DRESS: mmcglohn©jdfulwtler.com INSURER(S)AFFORDING COVERAGE NAIC# INSURER A:Travelers Properly Casualty Insurance Company 36161 INSURED ETRLLCO.01 INSURER B:Travelers Property Casualty Co of America 25674 ETR, LLC INSURER c:The Phoenix Insurance Company 25623 700 S French Avenue P y Sanford FL 32771 INSURERD: INSURER E: INSURER F: COVERAGES CERTIFICATE NUMBER:417451197 REVISION NUMBER: THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT,TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN,THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES.LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. INSR ADDL SUBR POLICY EFF POLICY EXP LTR TYPE OF INSURANCE INSD NIVD POLICY NUMBER (MM/DDNYYY) (MM/DDIYYYYI LIMITS A X COMMERCIAL GENERAL UABILITY 630514916536 10/1/2020 10/1/2021 EACH OCCURRENCE $1,000,000 CLAIMS-MADE X OCCUR DAMAGE TO RENTED PREMISES(Ea occurrence) $300,000 _ MED EXP(Any one person) $10,000 PERSONAL 8,ADV INJURY_ $1,000,000 GENL AGGREGATE LIMIT APPLIES PER: GENERAL AGGREGATE $2,000,000 _ X POLICY JECT LOC PRODUCTS-COMP/OP AGO $2,000,000 OTHER: $ B AUTOMOBILE LIABILITY GA5H916536 10/1/2020 10/1/2021 COMBINED SINGLE LIMIT $1,000,000 C AD3L963195 10/1/2020 10/1/2021 (Ea accident) X ANY AUTO BODILY INJURY(Par person) $ OWNED —SCHEDULED BODILY INJURY(Par'sadden!) $ AUTOS ONLY AUTOS ) PROPERTY DAMAGE AUTOS ONLY _ AUTOS NON-OWNED _ (Per accident) $ X HAPD" 5,000 Medio Payments $ A X UMBRELLA LAB X OCCUR CUP3L97482A 10/1/2020 10/1/2021 EACH OCCURRENCE $5,000,000 EXCESS LIAB CLAIMS-MADE AGGREGATE $5,000,000 DED X RETENTION$n $ A WORKERS COMPENSATION UB6H605926 11/13/2020 11/13/2021 X gTATUTE ETH- AND EMPLOYERS'LIABILITY Y/N ANYPROPRIETORIPARTNER/EXECUTIVEE.L.EACH ACCIDENT $1,000,000 OFFICERIMEMBEREXCLUDED? ( N/A (Mandatory In NH) E.L.DISEASE-EA EMPLOYEE $1,000,000 gdescribe under DESCRIPTION OF OPERATIONS below E.L.DISEASE-POLICY UMIT $1,000,000 B GarageUablNy GA5H916536 10/1/2020 10/1/2021 Other Then Auto Only 1,000,000 C GAL* AD3L963195 10/1/2020 10/1/2021 Other Then Auto Agg 3,000,000 DOL' DESCRIPTION OF OPERATIONS/LOCATIONS I VEHICLES(ACORD 101,Additional Remarks Schedule,may be attached If more space is required) "Hired Auto Physical Damage-Actual Cash Value or Cost of Repair,whichever is less,minus comprehensive deductible of$0 and collision deductible of $1,000. Certificate Holder Is added as additional insured/loss payee as respects operations of the named Insured in accordance with the policy terms,conditions& exclusions. See Attached... CERTIFICATE HOLDER CANCELLATION SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. City of Boynton Beach P 0 Box 310 AUTHORIZED REPRESENTATIVE Boynton Beach FL 33425 I ©1988-2015 ACORD CORPORATION. All rights reserved. ACORD 25(2016/03) The ACORD name and logo are registered marks of ACORD AGENCY CUSTOMER ID: ETRLLCO-01 LOC#: ACGR ADDITIONAL REMARKS SCHEDULE Page 1 of 1 AGENCY NAMED INSURED JD Fulwiler&Co.,Insurance ETR,LLC 700 S French Avenue POLICY NUMBER Sanford FL 32771 CARRIER NAIC CODE EFFECTIVE DATE: ADDITIONAL REMARKS THIS ADDmONAL REMARKS FORM IS A SCHEDULE TO ACORD FORM, FORM NUMBER: 25 FORM TITLE: CERTIFICATE OF LIABILITY INSURANCE 'GKLL&DOL Locations: 1 700 S French Ave,Sanford FL 2)255 Willingham Dr.,Suite A. Juliette,GA *DEALERS OPEN LOT LIMITS: Location 1 $2,800,000 Comprehensive $2,800,000 Collision Location 2 $200,000 Comprehensive $200,000 Collision Limit indudes dealers'owned autos Deductible: COMPREHENSIVE: Perils Deductible Applies To:All Other Deductible:$1,0001$10,000 Perils Deductible Applies To:Earthquake Deductible:$2,500/$25,000 Perils Deductible Applies To:Windstorm and Hail Deductible:$5,000/No Max Flood Exclusion Applies COLLISION: $1,000 Deductible *GARAGEKEEPERS COVERAGE: Location 1 $1,200,000 Comprehensive $1,200,000 Collision Location 2 $200,000 Comprehensive $200,000 Collision Coverage Basis: Direct Primary Deductible: COMPREHENSIVE Perils Deductible Applies To:All Other Deductible:$1,0001$10,000 Perils Deductible Applies To:Earthquake Deductible:$2,500/$25,000 Perils Deductible Applies To:Windstorm and Hail Deductible:$5,000/No Max Flood Exclusion Applies COLLISION Collision Deductible:$1,000 ACORD 101 (2008/01) 2008 ACORD CORPORATION. All rights reserved. The ACORD name and logo are registered marks of ACORD TRAUMAHAWKJShop Order �AEI� BOYTON BEACH FIRE RESCUE ETR, LLC David Friedberg 212 Hickman Drive 2080 HIGH RIDGE ROAD Sanford, Florida 32771 BOYNTON BEACH, FL 33426 (407)339-6737 561-742-6329 sales@etrllc.org FriedbergD@bbfl.us Exp. Date: 03/11/2020 Quote No: 10089-0121 TYPE9: 16495-T9TL Top Level- International MV607 GENERAL: GEN INFO 9 ************BID STANDARDS*********** CHASSIS: 43/4400LP International/Navistar MV607 CONVERSION: 16495-T9 164-172 x 95 Med Duty Mod MV607 International BASE: 16495-T9B 164-172 x 95 T-9 Base 4300LP 08/20/2020 Pa•e 1 PART NO S DESCRIPTION QTY == ************BID STANDARDS***********- 15.012 01/30/20== 1 00-00-0107 1--Order Date: Post July 1, 2019 1 00-00-0113 < 1--Ambulance Built to Star Of Life KKK-A-1882-F Certification, Latest Revision 1 Exceptions to be noted on final sticker. 00-10-0015 Vehicle Quantity (Vehicles) 1 00-91-0002 BODY NUMBER: 1 00-91-0005 I-- MICKEY BODY DUE DATE : 1 00-91-0003 CHASSIS VIN NUMBER: 1 00-91-0024 ACCOUNT MANAGER:Mikael Blevins 1 00-91-0027 S REFERENCE UNIT#: 17ML 20173 1 00-91-0028 S RE-WRITE DATE:2-10-20 1 00-91-0040 SEAT BELT POSITIONS MODS 1 00-91-0042 I--CAB SEAT BELT MOD: 1 00-91-0044 I--Total: 2 Positions 1 00-91-0050 1-- REAR SEAT BELT MOD: 1 00-91-0052 I-- Total:3 Positions 1 00-99-9000 Revision Level: 0-Zero-ORIGINAL VERSION 1 00-99-9030 Change Order Level: 0-Zero-ORIGINAL VERSION 1 S ==BOYNTON BEACH FIRE RESCUE INTERNATION TYPE 1 1 01-1N-0000 Type I Medium Duty Modular Ambulance 1 01-AQ-E46D S < 2021 International MV607 SBA LP, 19.5 Tires 4-DR CUSTOMER SUPPLIED 1 2021 International 4300 LP 4 Door cab 01-IN-MIR3 1--Side Mirrors: OEM Aero Pedestal, Power Adjust, Heated w Turn signals Chrome 1 01-IN-PDLS I--Cab Door Locks Only 1 01-IN-RS01 < 1-- Rear Suspension: International Ride Optimized Susp(IROS), 12,000# 1 Make sure OEM Filter is installed on SV1 Valve. 1:/2,/2,2. P-se 2 PART NO S DESCRIPTION QTY *NOTE: If Oxygen Lift is installed, then if the 02 Cmpt Door is open, the air suspension will not dump until door is closed* 01-IN-RST1 S < I-- DUMP ACTIVATION: Manually Activated With Momentary Switch on Rear 1 of Bench The vehicle shall NOT Kneel (DUMP) with the vehicle in GEAR. NOTE: Dump Manually Activated with the Momentary Switch on Curbside Wall., Beside Rear Entry Door. Dump Automatically Raises When Vehicle is Started and Rear Entry Doors are Closed. 01-IN-TIRS -- Spare Tire: NONE 1 01-TU-0100 Jack and Tire Tools: None 1 01-IN-WHM9 I-- Centers & Lug Nut Covers for OEM Alum Wheel Front smooth 4 spline 30MM 8 lug 1 01-IN-WHMV Centers & Lug Nut Covers for OEM Rear Alum Wheels 6.25 HUG. 8 lug 30mm 1 == 164-172 x 95 Med Duty Mod MV607 International- 15.012 01/30/20== 1 BODY Generation 9 1 01-X0-0001 < I-- Body Certification Provided to Specification 1 The Body Manufacturing group certifies that this Ambulance Modular body has been constructed of materials and methods that meet or exceed the standards as required by the AEV Generation 9 Body Specification of December 11th, 2018 as published. The body shall be built and constructed to the submitted work order and the AEV Generation 9 build standards without exception. Any Deviations to the work order or Generation 9 build standards must have written authorization prior to body delivery to AEV by the AEV Body Engineer on file. 02-00-0002 )0, - I-- Body Build Information 1 Body Number; Account Manager; Mikael Blevins Chassis Type : 2021 International MV607 SBA LP, 19.5 Tires 4-DR Mickey Body Due Date; Rear Suspension: International Ride Optimized Susp (IROS), 12,000# 02-00-0003 < I--ALL DIMENSIONS ON ORDER WILL HAVE A VARIABLE OF + OR - 1/4" 1 Unless specified as a minimum dimension. 02-B2-1M82 S Body, Mod: Med Duty, 170"x 96"x 74"Interior HR- 6"Body Drop Navistar 1 02-00-0006 S --Headroom: 76/74"Finished Interior-Ducted A/C 1 02-00-0060 -- Compartment and Entry door Full length Stainless Steel Hinges std 1 02-00-0050 S < I--Perko Air Vent:Exterior, Used for Venting 3 NOTE: (1) Installed on M1 Door for 02 Venting, (1) Installed Above M7 For Exhaust Vent and (1) Installed on Right Rear for Exhaust Vent. (See Drawing) 02-B0-CC01 < I-- Compartment Construction: STANDARD, Unless Specified Otherwise 1 Sides and Back: .100 Polished Aluminum Diamond Plate Compartment Ceiling: .090 Aluminum Sheet 02-80-SFLO < I-- Compt Floors: Sweep-out, even with bottom doorjamb Unless Specified Otherwise 02-80-CC41 I-- Compartment floor thickness .125"standard 02-B0-CC18 -- Compartment Ventilation-Flap style#VT-2495-A01, STD t 02-B0-CEXB S I-- Curbside Entry Door(CSE): 84.812"H x 31.0"W x w/6"drop W/Black Door 1 Handle 02-B0-09B2 C/S Door Check: Double Action Gas Shock 1 04-EA-09B1 I-- Door Swing Angle: Set to 90-100 degrees 1 02-B0-CESL I-- Curbside Entry Door(CSE) Location: Standard, Rearward of M-7 Compt if 1 Optioned ZZ-ZZ-ZZZZ 1 02-B1-SWM1 S < I--Step Well, CURB Entry,2-Step DP, Elon for(2) QR-D-2 Med Duty Chassis 1 MTB NOTE: C/S Step Well Will be Elongated Rearward of CSE Door for (3) Portable "0"02 Storage Bottles (See Custom Drawing) 1:12.12.21 p..- PART -.-PART NO S DESCRIPTION QTY 05-IL-09SZ < I--ILOS Lt, Step Well:3"Kin#4302S LED stainless steel surface mount housing Light shall come on with CS door only LITE-K4302S 05-lL-09XA < I--IATS Light, Step Well:3"Kinequip#430204S, Chrome, LED Kinequip No 430204S. Light shall come on with CS door only. 02-BC-0602 S I-- Talk through: DELETE, Solid Back Wall No Opening 02-BC-0700 < I--Cab Roof Support:3/16"x 3"Steel Plate, Per Engineering Drawing 1 Between cab headliner and bottom side of cab roof to prevent oil canning. 02-BD-0120I--Body Drop: 6"Both Sides,Ahead of Rear Wheels 02-M1-M600 I--M-6 Compt(RRFwd):Delete 02-M1-M678 S < I--M-4 Compt(Tailboard):13.25"H x 37"W x 24"D(4) SCBA Bottles WI Black Handle MICKEY BODY NOTE: MAKE AND SHIP WITH BODY A WINE RACK STYLE BOTTLE HOLDER TO HOLD (4) BOTTLES. PER STEVE RING DRAWING. (M-4_COMPT_BOYNTON_BEACH) NOTE: RACK TO BE BOLTED IN COMPARTMENT NOT WELDED IN. 02-BO-CCO2 < I--Compartment Construction:STANDARD Diamond Plate 1 Sides and Back: .100 Polished Aluminum Diamond Plate Compartment Ceiling: .090 Aluminum Sheet 02-B0-CC08 I--Compartment Door Panel:Diamond Plate 1 12-DC-GA10 I--Compartment Finish:Diamond Plate Standard 1 02-B0-SWFL -- Compt Floor: Sweep-out, even with bottom doorjamb. 1 02-B0-CC41 --Compartment floor thickness.125"standard 1 02-BC-10A0 S I-- Compartment Door: SINGLE DOOR, 1-point Latch, Hinged BOTTOM 1 09-ZZ-ZZZZ I-- 1 02-X1-M15B S I--M-1 Compt(LF): 72 HR, 69.5"H x 25"W x 21"D W/Black Handle 1 02-80-CCO2 < I--Compartment Construction:STANDARD Diamond Plate 1 Sides and Back: 100 Polished Aluminum Diamond Plate Compartment Ceiling: .090 Aluminum Sheet 02-B0-CC08 I--Compartment Door Panel:Diamond Plate 1 12-DC-GA10 I--Compartment Finish:Diamond Plate Standard 1 02-B0-CC42 < I-- Compartment floor thickness.25"ILOS(Heavy Duty) 1 MTB to increase compartment floor thickness to 25 inch smooth aluminum. 02-80-PAN4 S < I-- Compt Floor:Pan Down 4" 1 NOTE: Compartment Floor Pan Down 4" Forward of Divider for BIB Storage 02-BC-10A5 I--Compartment Door: SINGLE DOOR, Forward hinged 2-point Latch 1 02-B0-09B0 I-- Compt Door Check:Double Action Gas Shock 1 04-EA-09B2 I--Door Swing Angle:Set to 110-120 degrees 1 04-TS-0037 I--Storage in Oxygen compartment Requested Exception to KKK-F 1 Specifications 04-TS-1400 S < I--M1 Divider, Vertical, Full compartment height, Full Depth alum, Fixed 1 NOTE: Install Divider as Close to Oxygen Lift as Possible 11-YZ-0903 I--Non-Compliant to 3.11.3 KKK-F Storage in Oxygen Compartments Notice 1 11-ZZ-0904 < I-- CAAS Exception C.11.3.9 Storage in an Oxygen Compartment 1 an exception to CAAS GVS 1.0 is taken for the following condition. Subpart 9. The oxygen storage area shall be configured and used only for the main oxygen cylinder and associated plumbing. 04-TS-STR1 S < I--Strap:2"Webb Seatbelt buckle chrome footman loops 1 This strap is to secure things from moving while the vehicle is in motion. NOTE: Locate Strap From Wall #1 to Fixed Divider With Footman Loops Mounted Just From Door Jamb on Wall #1 and Footman Loops on Divider Mounted on Side •;/2,/2s21 Pa•e 4 PART NO S DESCRIPTION QTY Toward Wall #3. 04-TS-STR2 I--2"Footman Loops:Locate back from jamb 05-EL-4M18 S < I--Light, Compartment:Maxxima LED 18", EA, ILOS MTB Note: No light hole required NOTE: Light Mounted on Ceiling Near Door Jamb 08-B1-02L2 S < I--Compartment M1 Wall Prep For 02 Lift Build out back wall to 14" deep Forward of Divider Final compartment interior Dimension wall to wall minimum must be 18 5/8" minimum. 09-ZZ-ZZZZ 02-X1-M1AH S I--M-la Compt(LF Upper): 72 HR, 17.56"H x 25"W x 21"D W/Black Handle 02-B0-CCO2 < --Compartment Construction: STANDARD Diamond Plate Sides and Back: .100 Polished Aluminum Diamond Plate Compartment Ceiling 090 Aluminum Sheet 02-B0-CC08 I-- Compartment Door Panel:Diamond Plate 1 12-DC-GA10 I-- Compartment Finish:Diamond Plate Standard 1 02-B0-CC16 I-- Compartment Door Ventilation-small punched half moon Louvered Door 1 02-B0-SWFL I--Compt Floor: Sweep-out, even with bottom doorjamb. 1 02-B0-CC41 I-- Compartment floor thickness.125"standard 1 02-BC-10A0 I-- Compartment Door: SINGLE DOOR, 1-point Latch 1 02-80-0960 I--Compt Door Check:Double Action Gas Shock 1 04-EA-09B1 I--Door Swing Angle: Set to 90-100 degrees 1 05-EL-4M18 S < I--Light, Compartment:Maxxima LED 18", EA, ILOS 1 MTB Note: No light hole required NOTE: Light Mounted on Ceiling Near Door Jamb 12-ZZ-ZZZZ I-- 02-X1-M27H S < I--M-2 Compt(LFM):42.7"H x 26.75"W x 21"D W/Black Handle NOTE: M2 compartment to have fixed divider for stair chair storage and (3) adjustable shelves to the right of the fixed divider. 02-B0-CCO2 < I--Compartment Construction:STANDARD Diamond Plate 1 Sides and Back: .100 Polished Aluminum Diamond Plate Compartment Ceiling: 090 Aluminum Sheet 02-B0-CC08 I--Compartment Door Panel:Diamond Plate 1 12-DC-GA10 I--Compartment Finish:Diamond Plate Standard 1 02-B0-SWFL -- Compt Floor:Sweep-out, even with bottom doorjamb. 1 02-B0-CC41 I-- Compartment floor thickness.125"standard 1 02-B1-BION Bio-Waste None; 1 02-BC-10A0 I--Compartment Door: SINGLE DOOR, 1-point Latch 1 02-B0-09B0 I-- Compt Door Check:Double Action Gas Shock 1 04-EA-0981 I--Door Swing Angle:Set to 90-100 degrees 1 04-TS-1200 S < I--M-2 Shelves (3), Adjustable, Ext: .125 Aluminum, Partial Width 2"lips 1 upward NOTE: Adjustable shelves to be from Fixed divider to Wall#3 04-TS-4010 I--Shelf Bracket:CPI 90 Deg with Slotted Holes 1 04-TS-1400 S < I--Divider, Vertical,Full compartment height, alum, Fixed 1 NOTE: Fixed Divider will be Mounted to Allow for Stair Chair Storage to the Left of Divider. 04-TS-STR3 S < I--Strap: 2"Webb, w/Chrome Metal Seatbelt buckle w footman loops IATS 1 This strap is to secure things from moving while the vehicle is in motion, and is not designed to be a crash stable securing device. NOTE: Locate Strap From Wall#1 to Fixed Divider 1:120/2020 P..- PART NO S DESCRIPTION QTY 04-TS-STR2 I--2"Footman Loops:Locate back from jamb 1 05-EL-4M36 S < I--Light, Compartment: (2)Maxxima LED 36", EA, ILOS 2 MTB Note: No light hole required NOTE: Mount One Light on Wall #1 Near Door Jamb and Mount One Light on Wall #3 Near Door Jamb. 05-HB-1310 XS < I-- Condenser, 12V: Pro-Air Dual Fan, FRKG 126 Front of Body over Cab 1 60,000 BTU 04-HA-1310 < I--ARCTIC WEDGE Front of Body, no pre-drilled light holes part #WEDGE-HVAC >>> No Pre-drilled light holes Use of the wedge is subject to engineering review and approval for Light duty Type Ill models. A reduction in light sizing above the wedge may be required. 04-HA-1360 I--No warning lights installed on Artic Wedge, Brand Sticker Not Required 1 12-B0-0004 --Painted Part-Painted Special color to match Body 1 06-RR-13Z0 I-- Standard Conduit: 1-1/2"", with pull wire 1 06-RR-1304 c I-- CONDUIT ORIGINATION POINT:M-1A compartment 1 06-RR-13T3 I-- CONDUIT TERMINATION POINT: Behind A/A Board(Panel) 1 06-RR-13Z1 I-- Conduit#2 1-1/2""diameter, with pull wire, Type 1 units Std 1 06-RR-1301 I-- CONDUIT ORIGINATION POINT: Electrical Circuit board cabinet 1 06-RR-13T2 I-- CONDUIT TERMINATION POINT: Behind Driver's seat 1 09-ZZ-ZZZZ -- 1 02-X1-M37J S I--M-3 Compt(LR):45"H x 52.375"W x 21"D w Black Handle 1 02-B0-CCO2 < I-- Compartment Construction:STANDARD Diamond Plate 1 Sides and Back. .100 Polished Aluminum Diamond Plate Compartment Ceiling: .090 Aluminum Sheet 02-80-CC08 I-- Compartment Door Panel:Diamond Plate 1 12-DC-GA10 I-- Compartment Finish:Diamond Plate Standard 1 02-B0-SWFL I-- Compt Floor: Sweep-out, even with bottom doorjamb. 1 02-B0-CC41 I-- Compartment floor thickness .125"standard 1 02-BC-1000 S < I-- Compartment Doors:DOUBLE DOORS, ILOS single 1 NOTE: Set Rear(Trailing) Door to Open as Far As Possible and Front(Leading) Door Set at 90 Degrees so the M2.5 Door will Open and Not Hit. 02-80-0980 I-- Compt Door Check:Double Action Gas Shock 1 04-EA-09B1 I--Door Swing Angle: Set to 90-100 degrees 1 04-TS-1160 I-- Shelf, Adjustable, Ext: .125 Aluminum, 2"Upward Lips 1 04-TS-4010I--Shelf Bracket: CPI 90 Deg with Slotted Holes 1 05-EL-4M36 S < (-- Light, Compartment: (2) Maxxima LED 36", EA, ILOS 2 MTB Note: No light hole required NOTE: Mount One Light on Wall #1 Near Door Jamb and Mount One Light on Wall #3 Near Door Jamb. 09-ZZ-ZZZZ I-- 1 02-X1-M57H S I--M-5 Compt(RR): 72 HR, 29.5"H x 52.375"W x 21.0"D W/Black Handle 2 02-B0-CCO2 < I-- Compartment Construction: STANDARD Diamond Plate 2 Sides and Back: 100 Polished Aluminum Diamond Plate Compartment Ceiling: .090 Aluminum Sheet 02-B0-CCO8 I-- Compartment Door Panel:Diamond Plate 2 12-DC-GA10 I-- Compartment Finish: Diamond Plate Standard 2 02-B0-SWFL I-- Compt Floor: Sweep-out, even with bottom door jamb. 2 02-80-CC41 I-- Compartment floor thickness .125"standard 2 02-BC-1000I-- Compartment Doors: DOUBLE DOORS, ILOS single 1 02-B0-0960 I-- Compt Door Check: Double Action Gas Shock 1 04-EA-09B2 I--Door Swing Angle: Set to 110-120 degrees 1 04-TS-1160 I-- Shelf, Adjustable, Ext: .125 Aluminum, 2"Upward Lips 1 04-TS-4010 I-- Shelf Bracket: CPI 90 Deg with Slotted Holes 1 05-EL-4M18 S < I-- Light, Compartment: (2) Maxxima LED 18", EA, ILOS 2 MTB Note: No light hole required 08/20/2020 Pa.e 6 PART NO S DESCRIPTION QTY NOTE: Mount One Light on Wall #1 Near Door Jamb and Mount One Light on Wall #3 Near Door Jamb. 09-ZZ-ZZZZ 1-- 2 02-X1-M77H S J--M-7 Compt(RF): 72"H x 23.75"W x 21.0"D W/Black Handle 1 02-BC-10A5 I-- Compartment Door: SINGLE DOOR, Forward hinged 2-point Latch 1 02-B0-0960 I-- Compt Door Check: Double Action Gas Shock 1 04-EA-09B2 I--Door Swing Angle: Set to 110-120 degrees 1 04-TS-HOOZ S I--Hooks (3), Equipment, Fastenal Rope Hook, Installed 3 ZZ-ZZ-ZZ01 S < I--Location: Lower Section of M7 Compartment(2) on Wall#2 and(1) on 3 Wall#3 NOTE: Install (2) hooks on Wall #2 Evenly Spaced Approx. 3" down to top of Hook and (1) Hook on Wall #3 Centered Approx. 3" Down to top of Hook. (See Photo on File) 05-EL-4M36 S < I--Light, Compartment:Maxxima LED 36", EA, ILOS 1 MTB Note: No light hole required NOTE: Light Mounted on Wall#3 of M7 Compartment near door jamb. 12-ZZ-ZZZZ 1 02-X1-M84H S I--M-2.5 Compt(LWW): 11.25"H x 41.75"W x 21"D W/Black Handle 1 02-80-0005 S < I--Door Strap & Foot man loops Kit per module body door 2 (2) STRA-DOOR Door strap kit for Seat belt style door strap, installed with Footman loops. This strap is to protect against overload of door gas strut assembly. (1)foot man loop in each end of the strap mounted to the door and the module. NOTE: Install (2) Cab Door Straps on M2.5 Compartment Door IAT Rubber Bumpers to Help Hold Door Open. Install Footman Loops 8" From Wall #1 to Footman Loop ann 8" From Wall#3 to Footman Loop 02-80-CCO2 < I-- Compartment Construction: STANDARD Diamond Plate Sides and Back. .100 Polished Aluminum Diamond Plate Compartment Ceiling: .090 Aluminum Sheet 02-B0-CC08 I-- Compartment Door Panel: Diamond Plate 1 12-DC-GA10 I-- Compartment Finish:Diamond Plate Standard 1 02-B0-SWFL I-- Compt Floor: Sweep-out, even with bottom door jamb. 1 02-B0-CC41 I-- Compartment floor thickness.125"standard 1 02-BC-10A0 S I-- Door, Compt, SINGLE DOOR, 1-pt Latch, Hinge Bottom 1 05-EL-40M8 S -- Light, Compt, M-2,5: NONE 1 ZZ-ZZ-ZZZZ I-- 1 02-X1-RAOH < I--Rear Access Doors:46.75" Wide x 60.625"High W/Tri-mark 030-1875 Black 1 Handles HAND-32326-02,32327-02 ZZ-ZZ-ZZZZ I-- 1 WELDING -CELL 1 1 04-AS-1800 I-- Stainless Steel-Sill protection:For the following compartments 1 04-AS-18M0 < I--M-1A: Left Front Compartment- Single Bend 1 REV to fabricate 04-AS-18M1 I--M-1: Left Front Compartment-Single Bend 1 04-AS-18M2 I--M-2: Left Front Middle Compartment- Single Bend 1 04-AS-18M3 I--M-3: Left Rear Compartment-Single Bend 1 04-AS-18M5 I--M-5: Right Rear Compartment-Single Bend 1 04-AS-18M7 I--M-7: Right Front Compartment-Single Bend 1 04-EA-PLAD S I--(4) Placard Holder, 12"x 12", with Placards Top Load, Aluminum "U" Trim 1 style Painted smooth placard inserts. REV to cut (4) 12" x 12" aluminum smooth insert sheet placards and paint job color of the body. Welded plate with drip rail edge placard holder style 18/20/2020 Pa•e 7 PART NO S DESCRIPTION QTY SHIP LOOSE 12-80-0004 -- Painted Part- Painted Special color to match Body ZZ-ZZ-ZZZZ I-- 04-BP-L964 BODY PROTECTION AND TRIM PACKAGE: 43/4400 LP MV-607 1 04-AS-0370 I--Wire/Hose Cover: Diamond Plate, Between Cab & Module 1 04-8A-0203 S < I-- Batt Box Under Cab, Passenger Side Crew Cab M2, Holds Up to (3) Grp 31 1 Batteries For MV607 Navistar Four Door(4300/4400 previous) Please request Engineering drawing, send to Specials request with account manager NOTE: Batteries Located on Passenger Side of Cab Below Rear Cab Door. Install a Custom Diamond Plate Spacer On Top of Battery Box to Fill In Gap (Reference 17ML 20173) NOTE: Install an Intermediate Step 12" Long With Bar Grate used for Easier Entry/Exit Into Rear of Cab on Driver and Passenger Side. NOTE: Have Vendor Leave the Upper Step Off of Passenger Side Battery Box and AEV will Install so Both Steps Will be Same Height From Bottom Step 04-BW-0032 S < I--Fuel Tank Cover: 60 Gallon Fuel Tank Diamond Plate, Driver Side Crew Cab 1 M2 NOTE: Install an Intermediate Step With Bar Grate for Easier Entry/Exit Into Front Cab on Driver and Passenger Side. Driver Side Intermediate Step Will be 12" Long Due to OEM Fuel Tank Straps and Passenger Side Will be 12"Wide. The Intermediate Steps Will be Mounted Lower Than Standard Location to Minimize Distance Between Steps for Easier Entry/Exit(Reference 17ML 20173) NOTE: There will be no Drawer on Driver Side. 04-8W-ABME I--Bumper, Rear:Medium Duty Hd Framed w/DP pontoon covers MICKEY BODY NOTE: See Steve Ring Drawing (2-INCH_BUMPER_FRAME_BOYNTON) 04-BW-FLMD S < I-- Step, Center: 2"x 9"Grip strut, Fixed Position 1 NOTE: Center Step to be Fixed and Make Sure Power Cot Legs Will Clear Step When Lowered 04-BW-FRBO I-- Step, Bus Style: None 1 04-EA-1300 < I-- Dock Bumpers: Rubber 2 1/4"H x 16"W x 2" Thick 1 Part No: BUMP-02A 04-BW-AF02 I-- Wheel Size: 19.5"(Must match what is on chassis) 1 04-BW-AF20 I--Fenders, Rear: Polished Aluminum, Medium Duty 04-BW-DP51 S < I--Skirt Rails: Polished C-Channel Skirt rails -Measure to unit ILOS RAIL-EONE NOTE: Install Black Reflective Stripe In "C" Channel Skirt Rails 04-BVV-DP92 < I-- Corner Caps: 24.0" High, Alum Diamond Plate 1 If there is a body drop, add the appropriate height to Corner Caps. 04-BW-DP93 < I-- Front Stone Guards: 24.0" High, Alum Diamond Plate 1 If there is a body drop, add the appropriate height to Stone Guards. 04-BW-DP94 I-- Rear Kick Plate: Polished Aluminum Diamond Plate 1 04-AS-0500 < I--Holder, License Plate, CPI C30002, Recessed choice of lights Delete standard Tag cut out HOLD-12C 04-AS-0522 XS (--Location: Offset to Driver Side Due to M4 Compartment s:/2I/2I2o P..- - PART NO S DESCRIPTION QTY 05-EL-44TN I-- Tag Light:Kinequip LED#132703C 1 04-DE-0010 I-- Rear Deflector: NONE 1 05-EL-SKV6 S < I--(4) CAB LED Strip Lights, Red/White 12"IATS 2 NOTE: Mount Red On TOP and Clear on Bottom NOTE: Install (4) Strip Lights, (2) on Each Side of Cab on Bottom Step Below Each Cab Entry Door. (See Drawing) 05-EL-SLJB S < I--LED CAB Ground Lights: (4)Kinequip White 12"-LED lights, IATS 2 Mounted under cab steps (2)each side for each cab door. 05-EL-SLGY S < --LED Ground Lights Switched: 2 The underbody lights work off a switch in the console or with any cab door. Lights stay on for 30 seconds after all doors are closed. 04-EA-09A6 S < (4)Rear Door Hold Opens: 5 1/2"Grabber Style, Top/Bottom each door 1 Part No: HOLD-16A (2) NOTE: make sure rear tilt out windows do not hit body when doors are open. 04-EA-1120 Mud Flaps Front: NONE 1 04-EA-1133 Mud Flaps Rear: Modular, Rubber, Medium Duty units AEV LOGO 1 EXTERIOR LIGHTING/HEAT/AC/INSULATION -CELL 2 1 05-EL-1800 CORNER CAP LED ICC/WARNING LIGHTS 1 05-EL-18F0 I-- Front Corner Cap LED ICC/Warning Lights: Warnings RED/WHITE 1 05-EL-18F1 S < I--Front Center ICC Lights: (5) On OEM Cab Roof 1 Switch w/Headlights. 05-EL-18R5 I-- Rear Corner Cap LED ICC/Warning Lights: Warnings RED/AMBER 1 05-EL-18R3 < I--Rear ICC Lts:(3)RED Weldon LED No 9186-1500R 1 Switch w/Headlights 05-EL-18RK I--Rear/CC Lt Guards:(3)Across Rear 1 06-SW-CC01 1-- ICC Warning Lights Switched: Primary Only 1 05-EL-2502 LED Lights, Patient on Board, Exterior 1 05-EL-2524 S < I--Amber LED POB Light, Each 2 NOTE: Install Lights on Bottom of Exterior Outer Corner of M3 Rear (Trailing) Door and M5 Rear(Trailing) Door. (See Drawing) 05-EL-2564 I--Lights Switched with Entry Door Switch 1 05-EL-2504 LED Lights, Door Panel Warning, Interior 1 05-EL-2524 S < I--Amber LED POB Light, Each 8 NOTE: Lights Installed on Interior Door Panel on the Lower Outer Corner of the M1 Door Panel, M2 Door Panel, M3 Leading (Front ) Door Panel, M5 Leading (Front Door Panel) M7 Door Panel, C/S Entry Door Panel and Both Rear Entry Door Panels. 05-EL-2564 I--Lights Switched with Entry Door Switch 05-EL-2312 S < Tail Lights, Whelen LED Combinations, ILOS, Non FORD chassis 1 Stack Lights Top to Bottom: Turn Signals Backup Lights Brake/Taillights 05-EL-35A6 < I--Side Marker Lts:(2) Whelen M6 LED Red Running/Turn, ILOS 1 Running to be wired as Tail and Turn to be wired as Stop These are to both have flanges. 05-PH-LF20 I--M6 Series Flange, Chrome Plated, Std:Each 2 05-EL-2414 I-- Whelen M6 Series, Tail Lights 1 05-EL-2420 I-- Stop/Tail, Whelen M6 Series, LED, Pair 1 05-EL-2426 I-- Turn, Whelen M6 Series, LED, Pair 1 05-EL-2432 I--Back up, Whelen M6 Series, LED, Pair 1 05-PH-LF24 I--M6 Series Flange, Chrome Plated, Std: Three Pair 1 •:/21/2121 Pa.e 9 PART NO S DESCRIPTION QTY 06-EC-4326 I--Note: Standard Back-up Alarm Installed 06-EC-4331 I--Access Panel:NONE Required 05-EL-4300 Patient Area Turn and Stop Light Indicator: None 1 05-EL-43DL Third(3rd)Brake Light:NONE 1 05-EL-4584 SCENE/FLOOD LIGHTS(LED-M9 Series) 1 05-EL-45L4 < I--Left Scene Lights: (2)LED-M9, Chrome Flange Whelen Chrome Flange provided with purchase of Light 05-EL-0224 I--Flanges:Above M9 Scene lights, Incorporated into lights 06-EL-18LF S < I--Left Flood Activate:Left Flood Switch Activate: (1) Switch in Front Switch Panel for Each Side Street Side Rear Scene Light to Activate When the Vehicle is in Reverse 05-EL-45T4 < I--Right Scene Lights:(2)LED-M9, Chrome flange Whelen 1 Chrome Flange provided with purchase of Light. 05-EL-0224 I--Flanges:Above M9 Scene lights, Incorporated into lights 1 06-EL-18RT S < I--Right Flood Activate:Right Flood Switch and open CSE Door 1 Curbside Rear Scene Light to Activate When the Vehicle Is in Reverse and CSE Door Open. 05-EL-46R4 < I--Rear Load Lights:(2)LED-M9, Chrome flange Whelen 1 Chrome Flange provided with purchase of Light. 05-EL-0224 I--Flanges:Above M9 Scene lights, Incorporated into lights 1 06-EL-18RE --Activate:Rear Flood Switch, Reverse and Lead RA Door 1 06-EL-1800 I--Add Activation:Rearward Left and Right scene lights. come on w/Reverse 1 06-EL-1800 X < I--Add Activation: Side Scene Lights to Work With Corresponding 1 Compartment Door NOTE: Additional Activation for Scene Lights to Work With Corresponding Compartment doors on Side and Will be Battery Switch Timer Hot. HEAT AND A/C 1 05-HA-2005 I-- Patient Ventilation System:4 inch Power Intake, 4 inch Power Exhaust STD 1 05-HB-1001 S < I--AC(HVAC)SYS: ProAir HotWeathPkg, Ducted- Vertical, Navistar/Kenworth 1 Mounted Behind the Attendant Seat Base Facing Rear of Truck 05-HA-0800 < I--Activ Tek induct 500-12V UV light with Ozone 1 System is to be installed in return airt Cabinet. Must be servicable, but not visible to EMT » Annual replacement of the UV bulb is required > 05-HA-1005 I--AC COMPRESSOR:Secondary OEM engine compressor 1 05-HA-1306 I--A/C Condenser: See M2 Cmpt for Condenser Information 1 05-HA-14R0 < --Hella Relay Connector:Installed 1 (1) CAPS-HELLA (1) PLUG-HELLA 05-HB-14PC I--AC Evaporator:Pro-Air(AC/Heat unit) w/dual fans-STD vertical 941 1 05-HA-1404 I--Heater Hoses:EPDM-Nomex Rubber(per Ford QVM) 1 05-HA-14B5 I--FILTER: Washable Carbon Pre-Filter 1 05-HA-14D1 I--Ducted A/C Delivery: Insulted foil wrap, 10 registers 1 8 registers in ceiling; 2 registers on A/C Cabinet face 10-HA-0304 < I-- Thermostat, Rear A/C, Digital, Class 1 LX-1, Includes Front Also 1 Thermostat located in A/A 05-HA-0603 < Roof Top AC: Coleman Roughneck Mach 8 15,000 BTU w/Heat Strip Ultra low 1 -White This unit will add 8.25"to the vehicle clearance height. Separate thermostat per each cooling unit 0:121/2121 P_.- 10 PART NO S DESCRIPTION QTY 05-HA-0630 < I--Roof Top AC Drain Pan Kit and hose 1 Install Dometic Drain pan kit to underside of AC unit prior to installation, Connect to 1/2" ID hose that runs inside the module tubes, through wall and out bottom of module. Install kazoo valve on end of hose to prevent bug intrusion. Dometic part 3107688 016 auxiliary drain pan kit 05-HA-0642 S < I--Roof Top AC Cover: Expanded Metal This unit will add to the vehicle clearance height. 05-HA-0646 < I--Roof Top AC Cover Paint: This unit will add 13 1/4"to the vehicle clearance height. 12-B0-0004 --Painted Part-Painted Special color to match Body 05-IL-0057 CEILING PANELS : ACM Gloss White - Medium Duty 1 05-IL-0135 S < I--Dome Lts, LED K15: Kinequip, (4) Streetside, (4) Curbside 1 NOTE: (1) Button/Icon In the Rear Switch Panel for All Dome Lights With Switch High/Low/Off 06-EC-0900 S < I-- Timer, Spring wound Constant Hot, Check out, 15 Minute 1 Located on curbside wall at head of squad bench. NOTE: This is an additional timer installed on C/S wall beside C/S Entry Door. 06-EC-09P2 S I-- Timer to Power:All DOMES, High intensity ZZ-ZZ-ZZZZ7 05-IL-05T1 < I--Timer, Constant Hot, Check out, Class 1 Multiplex System 1 Activated with opening of either C/S or Rear Entry Doors. 06-EC-0910 < -- 5 Minute Activation 1 Light Circuit to stay on for 5 minutes when entry door is opened. 06-EC-09P2 S < I-- Timer to Power:All DOMES, High intensity 1 NOTE: Timer to Also Control Additional Light Above Electrical Cabinet ZZ-ZZ-ZZZZ I-- 1 09-MH-0801 I--IV Hook No 1: CPI Rubber IV 2008-1(Recessed Mount), ILOS 1 29-MH-1000 I-- LOCATION: Over head/chest area,primary patient on COT 1 09-MH-0802 I--IV Hook No 2: CPI Rubber IV 2008-1(Recessed Mount), ILOS 1 09-MH-08P2 I-- LOCATION: Over head/chest area, secondary patient on S/B 1 ZZ-ZZ-ZZZZ 09-MH-08A3 I--IV Hook No 3:Hook 07 w/Velcro bag stabilizer-IATS 1 09-MH-08P3 S < I--LOCATION:Install to Rear of Action Area Box on Back Wall 1 NOTE: Install hook on back wall of Action Area 9 1/2" off A/A box and 6" down from top cabinet. 09-MH-2AC6 < I--Recessed C/S Grab Rail, ceiling: 1.25 Dia 3 pt, 72in, Yellow Antimicrobial 1 Grab Rail will be recessed in a ABS pan. 09-MH-2ASS I-- Streetside Grab Rail: None 1 Insulation PKG: Generation 9 body std. 1 05-IN-ISTD < --Insulation: Circumferential PKG, Reflective w/Air cell core 1 single layer reflectix 05-IN-3STD < I--Blue Block foam ENTRY DOOR Insulated: 2" Thick IATS 1 For all entry doors, the blue block foam insulation shall be fitted tightly against the structural members to maximize R-value effectively. Gap spacing round each cell within the structure grid and the block foam shall not exceed 1/2"with tolerance of quarter inch.. 05-IN-4ST9 < I--Insulation Sound Deadening: Generation 9 Floor 1 Generation 9 Floor Design I:/2s/ I P..- 11 PART NO S DESCRIPTION QTY 05-IN-5STO -- nsu ation: IYa S ei ing, •..i lona • 1 05-IN-6STF < I-- Stepwell Insulation: Urethane Froth Insulation, IA TS 1 MTB to spray urethane froth insulation, underside of step well area. MTB option#7208738 05-LB-1130 S I--Front Light Bar: 72"Whelen LED Freedom 1 SALES NOTE: GET Q/W CODE FOR LIGHT BAR SETUP Driver side cable exit included. Mounting feet on lightbar included. 72"Whelen LED Freedom Install on Cab Roof Super LED Colors: R/R/R/R/R/R/C/C/R/R/R/R/R/R Lens Color to be Clear (1) Switch in Front LX-1 Switch Panel NOTE: The Clear Lights Will Go Out in Secondary 05-PA-LB41 < -- LB Mount: On Cab Roof 1 Reinforce between headliner for oil canning See Engineering 06-SW-0004 S I-- Switch Light bar: Switch in LX-1 Panel 1 ZZ-ZZ-ZZZZ 05-PA-LBOB Rear Light Bar: NONE 1 05-SY-LTMN M SERIES LED WARNING LT SYSTEM-43/4400 LTD 1 05-FS-0712 j--Flasher: None, All M Series LED's Are Programmable 1 05-FS-10P4 I--Flash Pattern: None, Internal Light Head Flasher 1 11-ZZ-0909 < I-- CAAS GVS Exception to C.8.2.12 Warning lights non-compliant to Table 1 1 dual mode The Warning lights pattern chosen by the Customer does not meet either the required photometric output flash or the pattern required of Table 1, Dual mode, Primary Secondary of CAAS C.8.2 12 An exception has been taken for only this element to the standard 06-SW-PS01 I-- Warning Light SWITCH: center console, Primary/Secondary 11-ZZ-0909 < CAAS GVS Exception to C.8.2.12 Warning lights non-compliant to Table 1 dual mode The Warning lights pattern chosen by the Customer does not meet either the required photometric output flash or the pattern required of Table 1, Dual mode, Primary Secondary of CAAS C.8.2.12. An exception has been taken for only this element to the standard. 05-PM-LC50 S < I--(2) Grille Lights: Whelen M7 Series, LED NOTE: Grille Lights to be Installed as: (2)On Lower Grille: (1)To Far Left and (1)to Far Right (2) On Upper Grille: (1) To Far Left and (1)to Far Right NOTE: Flash in "X" Pattern 05-PM-L150 S I--(2)Additional Grille Lights: Whelen M7 Series, LED 1 05-PH-LF22 I--M7 Series Flange, Chrome Plated, Std:Each 2 05-PM-LR24 I-- LED M7 Red- Pair 1 05-PM-LRA3 I--Light, Whelen LED M7 Red LED/Clear Lens -Programmable 2 05-PL-LY04 -- LED Color for Above M7 LED: RED 2 05-PM-LV10 I--Lens Color: Clear 2 25-PH-LT84 I--LED Lights: Programmable, Single Light 2 05-PM-LN20 --Flanges, Chrome : Grille Lights M7 1 05-PM-LR25 I--LED M7 Red-Pair 1 05-PM-LRAF I--Light, Whelen LED M7 Red LED/RED Lens -Programmable 2 05-PL-LY04 I--LED Color for Above M7 LED : RED 2 05-PM-LV20 I--Lens Color: Red 2 25-PH-LT84 I--LED Lights: Programmable, Single Light 2 05-PM-LE50 I--(2) Intersection Lights: Whelen M7 Series, LED 1 05-PM-LN14 I--Flanges, Chrome : Intersection M7 1 8:/21/2121 P..- 12 PART NO S DESCRIPTION QTY 05-PM-LR32 I--LED M7 Red/White Split-Pair 1 05-PM-LRC1 I--Light, Whelen LED M7 Red/White LED/Clear Lens-Programmable 2 05-FS-1212 S I-- Programmable Lights Split Color 2 05-PL-L Y12 I--LED Color for Above M7 LED: RED/WHITE 2 05-PM-LV10 I--Lens Color: Clear 2 05-PH-LT23 I--DELETE(1) Center Front Warning Light 1 05-PH-LT25 I-- Light(s)are moved into the front light bar. 1 ZZ-ZZ-ZZZZ I-- 1 05-PM-LG70 I--(2) Outer Front Body Lights: Whelen M9 Series, LED 1 05-PH-LF12 I--M9 Series Flange Chrome Plated, Std: Pair 1 05-PM-LS24 I-- LED M9 Red-Pair 1 05-PM-LRK5 I--Light: Whelen M9, LED, RED LED/RED Lens, Programmable ILOS 2 05-PL-LY54 I--LED Color for Above M9 LED : RED 2 05-PM-LV20 -- Lens Color:Red 2 25-PH-LT84 I--LED Lights:Programmable, Single Light 2 05-PM-LH70 I-- (4) Upper Side Body Lights: Whelen M9 Series, LED 1 05-PH-LF14 I--M9 Series Flange, Chrome Plated, Std: Two Pair 1 05-PM-LS44 I--LED M9 Red- Two Pair 1 05-PM-LRK5 I--Light: Whelen M9, LED, RED LED/RED Lens, Programmable ILOS 4 05-PL-LY54 I--LED Color for Above M9 LED: RED 4 05-PM-LV20 I--Lens Color:Red 4 25-PH-LT84 I-- LED Lights: Programmable, Single Light 4 05-PM-L150 S < I--(2) Rear Intersection Lights: Whelen M7 Series, LED 1 Locations: (1) Under M2.5 Compartment and (1) on C/S Same Height 05-PH-LF22 I--M7 Series Flange, Chrome Plated, Std: Each 2 05-PM-LR24 I--LED M7 Red-Pair 1 05-PM-LRA5 I-- Light, Whelen LED M7 Red LED/RED Lens -Programmable 2 05-PL-LYO4 I-- LED Color for Above M7 LED: RED 2 05-PM-LV20 I-- Lens Color:Red 2 25-PH-LT84 I-- LED Lights: Programmable, Single Light 2 05-PM-LJ70 I--(2) Outer Rear Body Lights: Whelen M9 Series, LED 1 05-PH-LF12 I--M9 Series Flange Chrome Plated, Std: Pair 1 05-PM-LS26 I-- LED M9 Amber-Pair 1 05-PM-LRK9 I--Light: Whelen M9, LED, AMBER LED/AMBER Lens, Programmable ILOS 2 05-PL-LY56 I--LED Color for Above M9 LED :AMBER 2 05-PM-LV40 I--Lens Color:Amber 2 25-PH-LT84 I--LED Lights: Programmable, Single Light 2 05-PM-LK80 I--(4)Additional Rear Body Lights: Whelen M9 Series, LED 1 05-PH-LF14 I--M9 Series Flange, Chrome Plated, Std: Two Pair 1 05-PM-LT07 I-- Light: Whelen M9, LED, RED LED/RED Lens, Programmable IATS 2 05-PH-LF10 I--M9 Series Flange, Chrome Plated, Std. Each 2 05-PL-LY54 I--LED Color for Above M9 LED : RED 2 05-PM-LV20 I-- Lens Color: Red 2 25-PH-LT84 I--LED Lights: Programmable, Single Light 2 05-PM-LT06 I-- Light: Whelen M9, LED, RED LED/RED Lens, Non-Programmable IATS 2 05-PH-LF10 I--M9 Series Flange, Chrome Plated, Std. Each 2 05-PL-LY54 I--LED Color for Above M9 LED : RED 2 05-PM-LV20 I--Lens Color: Red 2 06-EL-2499 < I--Brake Light Override: Wire into rear warning lights above 1 Includes FLAS-ULF44 (1) Flasher unit to flash lights during warning cycle 06-EL-2501 I-- Override Function: During ALL modes of operation 1 05-PM-LL70 --(1) Center Rear Body Light: Whelen M9 Series, LED 1 05-PH-LF10 I--M9 Series Flange, Chrome Plated, Std. Each 1 05-PM-LSO6 I-- LED M9 Amber-Each 1 05-PM-LRK9 I--Light: Whelen M9, LED, AMBER LED/AMBER Lens, Programmable ILOS 1 05-PL-LY56 I-- LED Color for Above M9 LED :AMBER 1 05-PM-LV40 I--Lens Color:Amber 1 25-PH-LT84 I--LED Lights:Programmable, Single Light 1 05-ZZ-ZZZZ 1 S < ELECTRICAL- CELL 3 I Dump Manually Activated With the Momentary Switch on Curbside Wall, Beside Rear Entry Door. Dump Automatically Raises When Vehicle is Started and Rear Entry Doors are Closed. I; 1/21_ 1 Pa•e 13 PART NO S DESCRIPTION QTY Disable Auto Door Locks in Module (If Equipped) Air Tank Drain Lines Install (2) Pull Lines Under Cab Step to Drain Air Tanks Install Additional Low PSI Indicator Light for Rear Air Suspension in Cab LX-1 Switch Panel. 05-IL-12MP S < I-- Cab Ovhd Light: Grote 4"RED LED For Compartment 'Open Light NOTE: Install light in headliner center between driver and passenger seat for compartment door open light. 06-00-0005 S < I-- Customer Supplied Part(s) : Yes See account 1 1) One Radio head For Console 2) Radio Speaker to Mount in Console 07-00-0182 I-- Custom design wood console included in Order 1 06-00-0001 S < AUTOMATIC HI IDLE WITH LX-1 SYSTEM 1 NOTE: HI IDLE WITH LX-1 SYSTEM AUTOMATICALLY WITH LOW VOLTAGE. (CHASSIS HAS TO HAVE THE HI IDLE OPTION FROM DEALER) 06-00-0001 X < PORTABLE EQUIPMENT CHARGING CIRCUIT INSTALL AND LABEL BEHIND THE REAR DRIVER SEAT (1) 20 AMP CIRCUIT BREAKER RUN POWER WIRES FORM UNDER FRONT CONSOLE TO: BEHIND REAR CAB SEAT (1) CIRCUIT (POWER AND GROUND) TO FRONT CONSOLE LABEL ON BOTH ENDS "PORTABLE EQUIPMENT CHARGING CIRCUIT" (1) CIRCUIT (POWER AND GROUND) TO BEHIND REAR SWITCH PANEL LABLED ON BOTH ENDS "PORTABLE EQUIPMENT CHARGING CIRCUIT" TO BE CONSTANT HOT 06-AA-0320 < --Headlight Flasher Special switching 1 Dealer to add note and explain special switching requirement. Pricing is subject to change based on complexity of request. 06-AL-47SU Hand Held Spot Light: None 1 06-AL-49R0 < -- CAB Spot Light: GoLight Stryker GO 3021,Halogen Black: Hardwired 200,000 1 CP Light is operated by Hard Wired control in cab 06-AL-5001 S < I-- CAB Spot Light Mount: Custom Spot Light Base BRKT-SPOTLIGHT 12-80-0004 --Painted Part-Painted Special color to match Body 06-EC-0800 S < Battery Switch &Auto-Battery Shut-down(Kill Circuit): 5 Minute, Non-Ford 1 Cole Hersee Paddle style battery switch powers up and shuts down the CONVERSION only! Chassis related circuits shall remain wired in the O.E.M. configuration per Ford QVM Bulletin No 63. SWITCH LOCATION: Behind Drivers Seat on Floor With a Smoke Lexan Cover Over Battery Switch. With Face Plate LABEL NOTE: The Headlights and DOT lights Need to Cut OFF With Battery Timer. This Option Included on Chassis From Dealer. 06-EC-0564 POWER Door Locks: Module Doors- Full Mod 1 06-EC-0505 < I--Door Locks, Tied into OEM System Module power locks are tied to the Chassis power lock system 1:121/212. Pa.e 14 PART NO S DESCRIPTION QTY 06-EC-0512 < OEM Key Fob:Included w/Chassis Unlock Mod Doors 1 Must also operate the Module Power Door Locks Optioned 06-EC-05C9 --Door Lock Switches : Integrated in Interior Entry door Handles 1 06-EC-05K0 -- ONLY the following doors shall have power door locks: 1 06-EC-05L1 --Electric Door Lock: (M-1A) Upper Left Front Compartment, 1 06-EC-05M1 --Electric Door Lock: (M-1) Left Front Compartment 1 06-EC-05M2 --Electric Door Lock: (M-2) Left Middle Compartment 1 06-EC-05M4 --Electric Door Lock: (M-3) Left Rear Compartment 1 06-EC-05M6 --Electric Door Lock: Rear Access Doors 1 06-EC-05M7 --Electric Door Lock: (M-5) Right Rear Compartment 1 06-EC-05N0 --Electric Door Lock: Curbside Access Door 1 06-EC-05N1 --Electric Door Lock: (M-7) Right Front Compt 1 06-EC-281X --Door Unlock Switch, Momentary, Exterior, hidden : NONE 1 06-EC-2800 < Door Unlock Switch, Momentary, Exterior, hidden 1 NOTE: Installation of Remote Door Lock Switch feature may increase likelihood of unauthorized entry into vehicle. By checking this option, purchaser further agrees to hold REV or chassis manufacturer harmless for any loss of vehicle or contents caused by unlawful access. 06-EC-0802 I--Location:Front Grille/Bumper Area ZZ-ZZ-ZZZZ I-- 06-EC-4300 Back-up Alarm: Standard 102DB 1 06-EC-43B0 I-- Cut Off Switch: Auto reset ,momentary style 1 11-ZZ-0933 < -- CAAS GVS V2.0 Exception C.16.1 Reset of Back-up Alarm 1 Installation of a reset of a back-up alarm shall cause an exception to the GVS 2.0 Standard for C.16.1 for this instance when a vehicle is shifted into reverse. 06-EC-CBZ5 XS Circuit Board, 12V: Multiplex LX1 Navistar/Terrastar 1 Includes the Following Items, please add to order: All the following need to be added as usual: Rear Digital Thermostat/Control for A/C, includes front also Door Open 5, minute check out timer for Domes Oxygen Contents Gauge front and back Silent Intercom Through LX-1 Panels (CUSTOMER REQUEST THAT DOMES COME ON EACH TIME VEHICLE POWER IS TURNED ON) 06-EC-1304 I--Voltage Monitor, LX-1, w/Warning Light 1 06-EC-2215 -- LX-1 Standard Module door Open Alarm and Icon on Front Display 1 06-EC-31 FA -- Back Up Camera: Adjustable ASA, Tied to LX-1 system White 1 06-EC-31FH I--LX-1 Right Turn Camera displays in front LX1 panel 1 06-EC-31J2 I--Right Turn Signal Camera: VCMS36RCM ASA, Chrome 1 06-EC-31H2 < I--Patient Area Camera: Federal CAMCCD Bullet Style(Grab rail Recess) 1 (1) CAMR-CAMCCD (1)ADAP-31100041 06-EC-3112 I-- Camera Mounted Toward:Rear(Faces Forward) 1 06-EC-CB07 I-- Circuit Protection, 12V: FET-Auto-reset 1 06-EC-SPA7 I-- LX1 Main Switch Panel Location : 1 06-EC-SPA6 S < I-- Switch Panel Mounted: Cab Console RAM Mount single straight arm 1 Straight ram arm 06-EC-SPZO I-- Patient Area LX1 Panel: 1 06-EC-SPZ1 I-- Pt Area LX1 Switch Panel: One Standard In Patient Compartment 1 06-EC-SPA1 I-- Switch Panel Located: Streetside A/A 1 06-EC-SP70 I-- Patient area switch panel mounted :flat to action wall std 1 06-FS-1106 I-- Sequencer, LX1, with load manager, 1 06-RR-NOX3 S < I-- CONSOLE, ALUMINUM SPEED LINE BLACK Four Door Cab: Navistar 1 Scribe fit to OEM Dash and cab floor. NOTE: Route Wires From Console to Behind Passenger Seat, Out of the Passenger Side of Console and Install a Metal Cover Over Wires With Cactus Mat Installed Over Metal Cover. Install Cover over Electrical Components in Cab Also. 08/20/2020 Pa•e 15 PART NO S DESCRIPTION QTY NOTE: Custom Length Console With Switch Panel at Front, Then Siren, Then Radio Space, Then Intercom, Then Map Slots, Then Cup Holders in the rear for the Two Rear Seats. 05-IL-1210 S < I--Map Light: Hella Flex Shaft, 19", 12VDC Halogen White NOTE: Install on Passenger Side Front of Console (See Photo on File) 06-RR-23J4 S < I--Door/Comp Ajar Buzzer:Activate with Entry& Compt Door NOTE: Activate Only When Truck is in Gear 07-RR-2301 I-- Customer Radio: Space for Customer installed Radio Heads 1 07-RR-24A0 I--Console Finish: Black, Textured "Easy Grip" 1 07-RR-020N S I--Add-on Console:ALUMINUM SPEED LINE BLACK Medium Duty console 1 07-RR-02A0 I--Drink Holder: (2)In Add-on Console, Big Gulp Size 2 07-RR-02A7 I--Drink Holder Location: Rear 2 07-RR-02F0 I--Note Book Slot: Single-Full width by 6"wide 1 07-RR-02F3 I--Double removable Lexan Divider(s) 1 07-RR-2301 I-- Customer Radio: Space for Customer installed Radio Heads 1 07-RR-24A0 I-- Console Finish: Black, Textured "Easy Grip" 1 07-ZZ-ZZZZ I-- 1 06-EC-GRO1 Ground Straps. Module to Frame: (Qty 4) Braided 1 06-IA-0001 Converter , 125V to 12V: NONE 1 06-IG-0310 Inverter: Vanner 20-1050 CUL-DC-Full Mod 1 06-EC-03AS I--Portable Equip Charging Circuits: Included in Inverter 1 06-EC-03AA I--PREWIRE LOCATION: (1)Cab Console, (1) Behind A/A 1 06-EC-03C9 < I-- Portable Equip Pwr Source: Ignition and/or Shoreline 1 Reference 3.7.7.2 and Figure 7 in KKK-A-1822E 06-IG-03A0 I--Battery Charger/Conditioner: 55A -Built into Inverter 1 06-IG-0003 I--Built-in Battery Charger: Enable- Wire to Batteries 1 06-IG-04L7 I--Inverter Location:M-1A (ULF) Compartment 1 06-MC-01A0 S Engine Hour Meter: THrough LX-1 System 1 06-MC-0900 Low Voltage Indicator: Amber with Buzzer 1 COMMUNICATION RADIO(S) RELATED 1 06-00-0001 -- 1 RADIO POWER 1 06-EC-03A0 c I--Radio Power No 1: 30A, Pos and Neg, 10 awg Wires 1 MDT Gateway Power Source 06-EC-03B0 I-- Radio Power Source: Battery Switch Hot 1 06-EC-03J0 S < I-- LOCATION: Inside Cab Center Console 1 NOTE: 6 Foot Lead in Front Console 06-EC-0302 S < I--Radio Power No 2: 30A with Buss bar 1 NOTE: Install Lexan Cover Over Buss Bar 06-EC-03C1 I--Radio Power Source:Ignition Switch Hot 1 06-EC-03E0 I--LOCATION: Behind Action Area Board 1 06-EC-03A3 I--Radio Power No 3: 30A, Pos and Neg, 10 awg Wires 1 06-EC-03B0 I--Radio Power Source: Battery Switch Hot 1 06-EC-03J0 I--LOCATION: Inside Cab Center Console 1 06-EC-2751 S < I--Intercom, David& Clark System:Installed 1 David Clark Headset details: David Clark Master System U3800 with (2) U3815 & (1) DC3690=The master and (2) of the U3815 to be in the cab and (1) DC3690 in the module location TBD AT PREBUILD David Clark Headset H3442 (quantity 4) Push to Talk Feature for All Headsets 08/20/2020 Palle 16 PART NO S DESCRIPTION QTY ZZ-ZZ-ZZZZ I-- ANTENNA LEADS 1 06-RR-1710 < --Antenna Base w/Coaxial Cable: KE794#1 1 MOUN-KE794 06-RR-1760 S I--Roof Location: OEM Cab Roof 06-RR-1772 < I-- Termination Point: Inside Center Console MOUN-K794 06-RR-1100 S < I-- Radio Head and Speaker Customer Supplied prior to production, Installed 1 NOTE: (1) Radio Head Installed in Console With Radio Speaker 06-RR-1809 I-- Patient Area Radio : None 1 06-EC-2700 S < I--Intercom, Fire Research ICA100-A00 Two way cab to patient area 1 Install Master Unit in Front Console Install Remote (Hands Free operation) In A/A Install In-Line Noise Filter on Intercom Power Supply Parts: (1) Fire Research ICA100 Intercom System Part# ICA-100-A-- KIT ICA Front Master With Volume and Push to Talk Controls, Mounts in Front Console Forward With Hands Free Mounts on A/A Wall (See Photo on File) Both Units are Surface Mounted Front and Rear Plastic Cases. ZZ-ZZ-ZZZZ 06-SO-0000 125V SHORE LINE AND OUTLETS 1 06-00-0001 1 06-SO-0907 < I--Shore Line Inlet: 20A,125 VAC Kussmaul Super Auto Eject w Bar graph 1 Yellow cover Requires additional space behind interior cabinets for installation. 06-SO-00L1 S < I--Inlet location:Front of Driver Side of Box in Angled Housing NOTE: The Shore Line Inlet Will be Located on the Forward Left Edge of the Module in a 45 Degree housing. Install a Label to Identify the Inlet is for the Inverter. The Height of the Inlet Cannot Exceed 56" From the Ground to the Top of the Shore Line Inlet. ZZ-ZZ-ZZZZ 06-SO-1000 S < I--Shore Line Inlet No 2: 30A, Auto Eject, IATS 7 NOTE: For Roof Top A/C 06-SO-00L1 S I-- Inlet location: Front of Driver Side of Box in Angled Housing 1 06-S0-1060 I-- Cover,RED, Shore Line Inlet:30A Super Auto Eject, ILOS 1 ZZ-ZZ-ZZZZ I-- 1 06-SO-10TT < lnpower Timer: VCM-05-01SF, Installed 1 NOTE. This allows the auto eject to be wired to the ignition switch In lieu of splicing into the OEM starter circuit and is required any this vehicle ZZ-ZZ-ZZZZ 06-SO-1400 I-- **125 Volt OUTLETS** 1 06-S0-1401 < I-- 125 VAC Outlet, No 1: 15A, Hospital Grade, IVORY 1 All 125 VAC outlets shall be back lighted when power is applied to the outlet. 06-SO-14L1 I-- LOCATION: Action Area, standard location 1 06-SO-1402 I-- Outlet mounting ORIENTATION: Vertical 1 06-SO-1402 I-- 125 VAC Outlet, No 2: 15A, Hospital Grade, IVORY 1 •:/2 /2120 Palle 17 PART NO S DESCRIPTION QTY 06-SO-14L3 S I--LOCATION: Behind Fridge, (See Drawing) 1 06-SO-1402 I--Outlet mounting ORIENTATION: Vertical 1 06-SO-1403 I-- 125 VAC Outlet, No 3: 15A, Hospital Grade, IVORY 1 06-SO-14L2 I--LOCATION: Curbside, see Drawing 1 06-SO-1402 I-- Outlet mounting ORIENTATION: Vertical 1 ZZ-ZZ-ZZZZ I-- 1 06-SO-1100 **INTERIOR 12 Volt OUTLETS** 1 06-SO-10XZ I-- 12 Volt outlets two separate single outlets 1 06-SO-10Y0 I-- 12V Outlet, No 1: Power Point Single- Wire thru Med Isolator 1 06-SO-11L1 I-- LOCATION:Action Area, standard location 1 06-SO-1402 I-- Outlet mounting ORIENTATION: Vertical 1 06-SO-1910 I--Power Source:Medical Isolator, Batt Sw Hot 1 ZZ-ZZ-ZZZZ I-- 1 06-SO-1102 I-- 12V Outlet, No 2: Power Point- Wire thru Med Isolator 1 06-SO-11L1 I--LOCATION: 1-1 Cabinet for Portable Suction (See Drawing) 1 06-SO-1402 I-- Outlet mounting ORIENTATION: Vertical 1 06-SO-1913 I--Power Source: The SAME as outlet No 1 1 ZZ-ZZ-ZZZZ 1 06-SO-1103 I-- 12V Outlet, No 3: Power Point- Wire thru Med Isolator 1 06-S0-11L3I--LOCATION: RF ALS, (See Drawing) 1 06-SO-1402 I-- Outlet mounting ORIENTATION: Vertical 1 06-SO-1913 I-- Power Source: The SAME as outlet No 1 1 ZZ-ZZ-ZZZZ I-- 1 06-SO-1104 I-- 12V Outlet, No 4:Power Point-Wire thru Med Isolator 1 06-SO-11L3 S I-- LOCATION: In Rear of Front Cab Console 1 06-S0-1402 -- Outlet mounting ORIENTATION: Vertical 1 06-S0-1913 --Power Source: The SAME as outlet No 1 1 ZZ-ZZ-ZZZZ 1 06-SO-1105 I-- 12V Outlet, No 5:Power Point- Wire thru Med Isolator 1 06-SO-11L4 S I-- LOCATION: In Cab Console, beside intercom(See Photo on File) 1 06-S0-1402 I-- Outlet mounting ORIENTATION: Vertical 1 06-S0-1915 I--Power Source: Medical Isolator No 2, Battery(CONSTANT) Hot 1 ZZ-ZZ-ZZZZ I-- 1 06-S0-1127 I--Hard Wired 12V Circuit, For Customer/Dealer Supplied Component 1 06-EC-1414 S I-- Location: M-3 Compartment 1 06-SO-1912 I--Power Source:Medical Isolator, Battery(CONSTANT) Hot 1 ZZ-ZZ-ZZZZ I-- 1 06-S0-1127 I--Hard Wired 12V Circuit, For Customer/Dealer Supplied Component 1 06-EC-1414 S I-- Location: M-3 Compartment 1 06-SO-1912 I--Power Source:Medical Isolator, Battery(CONSTANT) Hot 1 ZZ-ZZ-ZZZZ 1 06-SO-1161 S < I-- 12V Outlet, DUAL USB Fast 4.8A,. 2.4 A per slot Round IATS EACH 4 Includes waterproof cover DUAL USB outlet 26-SO-11L1 S < I--LOCATION: See Note (1) in Action Area Wall#2 (1) C/S Wall (2) In Cab Console (1) on Driver Side (1) on Passenger Side 06-SS-020B S < Siren: Federal, EQ2B, 4300/4400LP, ILOS 1 NOTE: Mount EQ2B Siren Amp Behind Rear Passenger Seat Between Back Wall of Cab Chassis and Rear Passenger Seat. 06-SS-5403 < --Siren Spkr: CPI,Bumper Recessed, SA5403,M2 1 This speaker is a recessed mount requiring a pre-described hole in the outer end of the front bumper 06-SS-S W01 < --Siren/Horn Switch: In Cab Console 1 Siren Functions OR OEM Horn 06-SS-SW04 I--microphone clip not installed Tie to Siren Microphone cord. 1 06-SS-13B0 S < Air Horn System: OEM Supplied and Installed 1 Air Tank Drain Lines: Install (1) Pull Line Under Driver Side Cab Step to Drain Air Tank Front Air Tank, 08/20/2020 Pa.e 18 PART NO S DESCRIPTION QTY Second Air Tank Install Pull Line Under Passenger Side Step to Drain Air Tank if Chassis Come With Lanyard Drain. 06-SS-1800 S < Air Horns,ACTIVATION Valve:Manual Valve w/Lanyard ILOS Constant hot, CANNOT be hooked up with door switches or primary/secondary NOTE: Delete OEM Foot Switches and Install Lanyard at Head Liner Between Cab Seats. Make Sure Lanyard is Anchored Properly to Not Pull Loose. CABINET SHOP - Modular 1 07-00-0182 I-- Custom design wood console included in Order 1 07-00-0001 < ALL DIMENSIONS ON ORDER WILL HAVE A VARIABLE OF + OR - 1/4" 1 Unless specified as a minimum dimension. Cabinet Configuration 1 NOTE: Customer Uses Custom Bins for the Cabinets and Sizes are as Follows: Large Bin: 7"H x 16 1/2"W x 14 3/4" D Medium Bin: 7" H x 8 1/4" W x 14 3/4" D Small Bin: 3" H x 4 1/8" W x 5 3/8" D 07-00-MCO2 Mica Color: Gloss Gray D355-01 1 07-00-N002 I--All Cabinet interiors Standard Pre-laminated> WHITE 1 07-00-PCON < Polycarbonate Type/Color: Lexan- CLEAR Secure Latch 1 Note: For any secure latch window requested where a cabinet opening width is 20 inches or less, the secure latch window will be questioned at ordering. 07-00-PH01 I-- Window Handles: Full Length Extruded 07-01-SEK8 < I--Att. Seat: EVS, 1880P4B 10 deg Child Safety Seat,Black Per4Max Black, ARMRESTS are permitted on this seat SEAT-LOGO AEV REV (or can be deleted) Seat back angle fixed, no recline function. Child safety seat 07-SE-0901 < I--BASE:Swivel base for EVS Child Seat Option Handle on RIGHT std (2) Position Swivel, Forward or Rearward, Only BASE-1882S EVS handle is on right. 11-SE-04A0 I--Attendant Seat,Armrest:None 07-AC-6401 S AC CABINET:Evaporator, Std Location Behind Att Seat Facing Rear of Truck 1 07-ZZ-ZZZZ I-- 1 07-BK-0001 S < Bulkhead Cabinet Under Talk Thru:J1 Installed IATS, See Drawing 1 NOTE: Top of Cabinet to have a 3/4" Lip to from a Countertop 07-DR-WD13 I--Doors: Dual Flush Fitted 1 07-CA-21A0 I-- TRIM: U-shaped Door, J-trim opening, DBL DRS 1 07-DR-OR05 I-- Hinge Orientation: (1) RIGHT and(1) LEFT 1 07-HW-HIN1 I-- Hinge: 1 1/2"Stainless Steel Piano Hinge 2 07-HW-SO01 I--Lever Latch:Non-locking- Black Finish 2 11-X0-0012 (-- Stowage rating label-Black Lever latch 8 pounds applied each 2 07-TS-1200 j--Shelf Track: Small alum Unistrut type 1 07-CA-0608 S < I--(2) Shelves:Adjustable mica over substrate with Alum Trim 1 NOTE: Mount Shelves on a 15 Degree Angle Sloped Down From Front to Rear of Cabinet. ZZ-ZZ-ZZZZ 1 07-CA-04A8 S < Cabinet, (3) Glove Storage, over C/S Entry Door 1 NOTE: Each Glove Opening Needs to be 11"Wide to Fit Customer Glove Boxes. 07-DR-LX04 I--Door: Overlay He, 3/8"Lexan-3-glove dispense thru 1 07-HW-S011 I--Round Pull Latch: Non-locking- Chrome Finish 1 11-X0-0010 I-- Stowage rating label- Southco round latch 10 pounds applied each 1 07-ZZ-ZZZZ -- 1 I: , , Pa•e19 PART NO S DESCRIPTION QTY 07-CA-0300 S < CURBSIDE UPPER: Over S/B, Mods 1 NOTE: Cabinet K1, K2 Cabinet to be 8" Interior Height and Will Have 1 Small Bin (3" H x 4 1/8"W x 5 3/8" D) Each Side of Divider 07-CU-K107 S < I-- Cabinet K1 8, K2: (2) Openings with flush center divider 1 NOTE: 1/2" Lip on Bottom of Each Opening 07-DR-LX24 I--Door: Single Flip Up 3/8"Lexan 2 07-HW-SO01 I--Lever Latch: Non-locking-Black Finish 2 11-X0-0012 I-- Stowage rating label-Black Lever latch 8 pounds applied each 2 07-ZZ-ZZZZ -- 1 07-CA-04AF < Cabinet, (4) Glove Storage, over Rear Entry Doors 1 Four glove dispenser over rear doors 07-DR-LX06 I--Door: Overlay hinge, 3/8"Lexan-4-glove dispense thru 1 07-DR-LZ10 I-- Hinges: Stainless Spring Loaded 3 07-HW-SX11 I-- Round Pull Latch: Non-locking- Chrome Finish 1 11-X0-0010 I--Stowage rating label- Southco round latch 10 pounds applied each 1 07-ZZ-ZZZZ -- 1 07-CA-0400 S < CURBSIDE REAR: Rear of S/B, Mods 1 Cabinet to be full height between squad bench and overhead cabinet and will open toward bench. Cabinet to come out to rear door jamb and will be 12" wide and will be open toward squad bench. 07-CB-DR00 I-- Open Cabinet: No Door, Trim Opening 1 07-CB-DR03 I-- Trim Type:J-Trim 1 07-RF-0002 I-- Interior Material and Color: To be Color Keyed Laminate 1 11-YZ-0907 < I-- Non-Compliant to 3.11.3 J3058, cabinets shall not come open in transit 1 Item is not tested to J3058, or not rated 07-CU-K103 S I--Cabinet L : (1) Opening with(3)Adj aluminum shelves 1 07-TS-1200 I--Shelf Track: Small alum Unistrut type 1 07-CA-0608 S < I-- (3) Shelves, Adjustable.125"Aluminum, 2"upward Lip 3 Smooth Aluminum DA Finish With Black Stampro on all Four Sides of Shelves (Reference 17ML 20173) 07-ZZ-ZZZZ I-- 07-LF-6401 LF Cabinet, Behind Att Seat: Cabinet "H'%(Elec Cab) 1 NOTE: This Cabinet Will Face The Rear of the Truck 07-CA-VEN7 I-- Plastic Vent: (2) Total, 1 column x 8 row, Vent 01 1 07-DR-WDOE 1-- Door, Single Solid Flush Fitted Electrical Area 1 07-CA-2100 1-- TRIM: U-shaped Door, J-trim opening 1 07-DR-OR04 1-- Hinge Orientation: RIGHT 1 07-HW-HIN1 1-- Hinge: 1 1/2" Stainless Steel Piano Hinge 1 07-HW-SO04 < I--Lever Latch: Non-locking-Black Finish Non Storage areas, no rating 1 applied SAE Compliant latch, tested. No storage rating applied to this area. 07-ZZ-ZZZZ 1-- 1 07-RF-MD01 RF ALS Cabinet: 164 Medium Duty 1 07-RF-CADR I-- Check the specified Walk through Door type (Station 5) 1 07-RF-1164 1-- Cabinet 1-1: Standard 1 07-DR-LX24 1-- Door: Single Flip Up 3/8" Lexan 1 07-HW-SO01 I--Lever Latch: Non-locking-Black Finish 1 11-X0-0012 I--Stowage rating label-Black Lever latch 8 pounds applied each 07-ZZ-ZZZZ 1 07-RF-IIMD S < I-- Cabinet 1-2: 34"High, Medium Duty 1 NOTE: Delete Separation From Center and Bottom Sections. Adjustable Shelves Will Be Above Fixed Shelf. Bottom Section Will be Accessed Through M7 Only. (See Drawing) 07-DR-WD13 I-- Doors: Dual Flush Fitted 1 NOTE: Install Brass Grabbers at Bottom of Each Door 1:/21/2,2, Pa•e 2. PART NO S DESCRIPTION QTY 07-CA-21A0 I-- TRIM: U-shaped Door, J-trim opening, DBL DRS 1 07-DR-OR05 I--Hinge Orientation: (1) RIGHT and(1) LEFT 1 07-HW-HIN1 I--Hinge: 1 1/2"Stainless Steel Piano Hinge 2 07-HW-SO02 I--Lever Latch: Locking-Black Finish 2 11-X0-0012 I-- Stowage rating label-Black Lever latch 8 pounds applied each 2 07-RA-IOA1 I-- Outside Access: Thru M-7 (RF) Compartment door. 1 07-RF-0001 I-- Interior MICA Color: White cabinet liner 1 07-TS-1200 I-- Shelf Track: Small alum Unistrut type 1 07-CA-0608 S < I-- (2) Shelves: Adjustable, Ext. .125"Aluminum 2"Upward Lips NOTE: Adjustable Shelves to be Powder Coated White and to Have Rubber Mat and Stampro Installed on Each Shelf. Adjustable Shelves will be Located Above Fixed Shelf. 07-CA-0608 X < 1--(1) Shelf:Fixed, Ext. .125"Aluminum 2"Upward Lips 1 NOTE: Shelf to be Powder Coated White and to Have Rubber Mat. Fixed Shelf Will be Mounted at the Top of the Recess for the Portable Suction and Portable 02 Storage. 07-RF-130D S I-- Cabinet 1-3:DELETE 1 07-ZZ-ZZZZ I-- 1 07-ZZ-ZZZZ I-- 1 07-RR-0064 S Right Rear Cabinet:NONE 1 07-ZZ-ZZZZ I-- 1 07-SA-0000 1 07-SB-MD01 SQUAD BENCH: Medium Duty 1 07-SB-0001 I-- See Upholstery Section for Post and Wheel Cup info 1 07-SB-1002 I--Bio-waste/Sharps No 1: Gray ABS Rim, Red Lexan Cover 1 07-SB-1003 I--LOCATION:At head of Squad Bench 1 07-SB-1004 I--SHARPS CONTAINER:3-Quart Bemis Container 1 07-SB-1005 I-- WASTE CONTAINER: 6 Quart 1 07-SB-1001 F I-- Storage Under Lid 1 07-SB-LID2 I--Squad Bench Lids: Split- 2-section 1 NOTE: Rear Lid Fixed Over M5 Compartment 07-SB-LH00 I--Hinge, Squad Bench Lid(s): Butt Style Hinges 1 07-SB-LHO3 I-- Lid Checks: Gas shock, Dual Action 2 07-SB-LH07 I--Latch, Squad Bench Lid: Slam Action Paddle, W keeper 2 11-X0-0030 I-- Stowage rating label-Squad bench interior, entire area 80 lbs 2 07-TR-SB01 --Edge Trim, Lids: Band w/Laminate and J-Trim Protection 1 ZZ-ZZ-ZZZZ I-- 1 08-MH-1400 < I-- Restraint Net, Black, 7 point detachable. at head of S/B. Mod 1 Seven (7) NET Attachment Points: Black in color. NETS-MOD2 08-ZZ-ZZZZ I-- 1 07-TC-0000 1 07-TC-6402 TOP CABINETS, - Med Std 1 07-TC-A642 S < I-- Cabinet B-1: See Drawing 1 NOTE: Full Height Fixed Divider. Cabinet Configuration Changed Due to Action Area Moved Forward and Area Maximized. NOTE: Cabinet B1, B2, B3, B4 Will Need to Store (1) Medium Bin (7" H x 8 1/4" W x 14 3/4" D) On Each Side of Divider. 07-CB-DR28 I-- Doors; Cabinet B-1 Secure Latch Restocking Sliding Window Top hinged 11-X0-0016 1-- Stowage rating label Secure Latch Restocking Sliding Window 30 pounds applied 07-TC-B642 I-- Cabinet B-2: See Drawing 1 NOTE: Full Height Fixed Divider. Cabinet Configuration Changed Due to Action Area Moved Forward and Area Maximized. NOTE: Cabinet B1, B2, B3, B4 Will Need to Store (1) Medium Bin (7" H x 8 1/4" W x 14 3/4" D) On Each Side of Divider. 07-CB-DR31 S I-- Doors; Cabinet B-2 Secure Latch Restocking Sliding Window Top hinged 1 1:12,/2,20 Pa•e 21 PART NO S DESCRIPTION QTY 11-X0-0016 1--Stowage rating label Secure Latch Restocking Sliding Window 30 pounds applied 07-ZZ-ZZZZ I-- 1 07-WC-C641 S < I-- Cabinet B-3: See Drawing 1 NOTE: Full Height Fixed Divider. Cabinet Configuration Changed Due to Action Area Moved Forward and Area Maximized. NOTE: Cabinet B1, B2, B3, B4 Will Need to Store (1) Medium Bin (7" H x 8 1/4" W x 14 3/4" D) On Each Side of Divider. 07-CB-DR28 S I--Doors; Cabinet B-3 Secure Latch Restocking Sliding Window Top hinged 11-X0-0016 I-- Stowage rating label Secure Latch Restocking Sliding Window 30 pounds applied 07-ZZ-ZZZZ I-- 07-WC-0000 1 07-WC-6411 S WALL CABINET:No CPR Seat/No Telemetry Area 1 07-WC-AA01 S < I--Action Area: Non Angled 1 NOTE: Maximize Action Area Space as Much as Possible. (See Drawing) Action Area Moved Forward From Original 07-WC-AA03 S < I-- A/A: Satin Brushed Stainless (6257)Mica Finish, Complete Action Area 1 NOTE: Action Area Board and Surrounding Including the Counter to be Satin Brushed Stainless Mica ILOS.Action Area to be Straight Not Angled. 07-WC-AABD S I--Action Area Board: Satin Brushed Stainless (6257)Mica Finish No 6 for 1 content 07-ZZ-ZZZZ I-- 1 07-WC-C641 S < I-- Cabinet C: Custom 1 NOTE: Cabinet C Will Need to Store (1) Large Bin (7" H x 16 1/2" W x 14 3/4" D) or (2) Medium Bins (7" H x 8 1/4"W x 14 3/4" D)on Each Shelf 07-TS-1200 I-- Shelf Track: Small alum Unistrut type 1 07-CA-0608 < I--(2) Shelves:Adjustable mica over substrate with Alum Trim (1) Each side of Divider 07-CB-DR35 < I--Doors; Cabinet C Secure Latch Restocking Sliding Window Left Side 1 Hinged Left Side hinged, Damper assist. (1) WIND-CFBD custom sized 11-X0-0016 I-- Stowage rating label Secure Latch Restocking Sliding Window 30 pounds applied 07-RF-0007 1-- No Inside Access to Exterior Compartment 1 07-ZZ-ZZZZ I-- 1 07-WC-D641 S < I-- Cabinet D: Custom 1 NOTE: Cabinet C Will Need to Store (1) Large Bin (7" H x 16 1/2"W x 14 3/4" D) or (2) Medium Bins (7" H x 8 1/4" W x 14 3/4" D) on Each Shelf 07-TS-1200 I-- Shelf Track: Small alum Unistrut type 07-CA-0608 < I--(2) Shelves:Adjustable mica over substrate with Alum Trim (1) Each side of Divider 07-CB-DR35 S < I-- Doors; Cabinet D Secure Latch Restocking Sliding Window Left Side Hinged Left Side hinged, Damper assist (1) WIND-CFBD custom sized 11-X0-0016 I-- Stowage rating label Secure Latch Restocking Sliding Window 30 pounds applied 07-ZZ-ZZZZ I-- 07-WC-E642 S < I-- Cabinet E: Rear of Cabinet C Below Fridge 1 Cabinet E to STore (1) Large Bin (7" H x 16 1/2"W x 14 3/4" D) 07-DR-LX23 S I--Doors, Double, Overlay Hinged Left, 3/8"Lexan- SM 07-HW-SO01 I--Lever Latch: Non-locking-Black Finish 1:/ S/ S I Pa•e 22 PART NO S DESCRIPTION QTY 11-X0-0012 I--Stowage rating label-Black Lever latch 8 pounds applied each 1 07-HW-HIN1 S I--Hinge:Reel Torque 1 07-ZZ-ZZZZ -- 1 07-WC-F641 S I-- Cabinet F:DELETE 1 07-ZZ-ZZZZ I-- 1 07-WC-0101 S I-- Cabinet 01:DELETE 1 07-WC-TA01 S I-- Telemetry Area: DELETE 1 08-SE-1702 I-- P4-4-Point PER4MAX Restraint System -with replacement indicator W/CPR 1 08-SE-1847 XS < I--(3)Per4max above Squad Bench, (0) Per4Max above CPR Side Seat Black 1 Belts Belt retractors can mount above the seat level, 08-SE-SB70 I-- S/B: (3) Sec patient restraints- 9"Sleeves Face of Bench 7 08-SE-SB76 I-- S/B: (3) Sec patient restraints- 5"Sleeves By Hinge 00-20-0072 I-- Per4Max Four-Point Seatbelts: Accept and Install Full Feature 1 07-ZZ-ZZZZ 1 CABINET SET -CELL 4 -MOD 1 08-00-OOCP Sub Floor, 3/4"Composite, ILOS 1 08-00-FL23 Flooring: Lonplate-#161 Metallic Gray 1 08-00-FL01 S I--Flooring Main Edge: 5"Recessed(1/2" deep) roll-up ILOS 1 08-AS-0003 I--Rear Threshold, Covered with Black Speedliner, 6"Wx Full W at rear doors 1 08-AS-0006 I-- C/S Stepwell Threshold, Polished Diamond Plate 1 ZZ-ZZ-ZZZZ 1 08-ZZ-ZZZZ -- 1 08-CS-0001 COT MOUNT HARDWARE: (Full Size Mod) 1 08-CR-09PL < I-- Cot Mount: Stryker, No 6390, Power Load, Installed 1 Not Compatible with cots other than Stryker! This item priced for Domestic USA usage only. »> Caution, Power load head consumes floor space toward attendant seat. Spacing review between seat and cot is recommended. » 08-CR-09SM --No Bolt On Stryker Antler Required. 08-CR-1002 < I-- 12v power feed location FRONT for Stryker power load 6390 1 The 12 volt feed will be drilled and fed through the template FRONT hole for a Stryker power load system. The 12volt power shall be brought through the floor, with Heat shrink connectors installed 08-CS-OOPM < -- Cot Position No 1: PRIMARY SIDE POSITION ONLY Maintain 12" between Cot and S/B. 08-CS-2000 < I--Primary Cot position under floor reinforcement Install 8 inch wide by 5 long 1/2"aluminum reinforcement at primary cot position. (Primary cot position only - REV Std) **If custom location is desired must be specified below 08-CS-3009 I-- Cot mount set up for: Stryker Power-Pro 6506 1 08-CS-19A5 I-- Cot Stop, Block: Stryker Power/Performance load. Install hook with kit 08-CS-19U1 I-- Q Straint System: NONE 1 08-OS-04ST - OXYGEN/AIR/VACUUM System: 1 NOTE: Delete 02 Alarms and Switches in Switch Panels 08-OS-0401 I-- Oxygen Outlet No 1: Amico Console- Ohmeda/Ohio Diamond Style 1 08-OS-040A I-- LOCATION: Action Area 1 08-OS-0402 I-- Oxygen Outlet No 2: Amico Console- Ohmeda/Ohio Diamond Style 1 08-OS-040D S < I--LOCATION: Curbside Wall, over the head of the S/B 1 NOTE: Under Cabinet K As Long As It Does Not Interfere With Head Strike Zone 08-OS-0403 I-- Oxygen Outlet No 3:Amico Console - Ohmeda/Ohio Diamond Style 1 08-OS-040C I--LOCATION: Center Pad of Liner Panel, Over Head/Chest 08-ZZ-ZZZZ I-- 08-OS-0525 < I--Rack No 1:Zico QR-OTS-ML, 15 1/2"wide Switch on wall, Motor Left M-Cyl 1 Lift Make sure Oxygen Hose is long enough for lift to be fully deployed. QR-OTS-ML (LIFT-02) •;/2./2121 Pa•e 23 PART NO S DESCRIPTION QTY Compliant to SAE J3043, August 8, 2017. 08-OS-0752 < --Activation, Zico 02 Lift, Door Mounted Mounted on compartment inner door panel 08-OS-0810 I-- Oxygen Hose Retractor: Hubbell Tool Balancer 1 08-OS-11G1 < I-- Cylinder Type: OXYGEN- Green Colored Hose t Regulator connection Nut: 9/16" RH thread 08-OS-1323 S I--Rack Location: M-1(LF), Wall#2 Forward of Divider r 08-OS-1712 < I--Regulator, Oxygen:Has LX1 Transducer, Inspected and Installed 9 Installed on 02 line for pressure test, Regulator and Transducer connected and left installed on Oxygen hose. Tagged with Inspector signature/Date Protected for shipment and left on the hose, Plastic restraint tie to the oxygen bracket for shipment > Required under Change notice 11, July 1, 2018 08-OS-1902 I--Regulator Wrench: Cast aluminum, OXYGEN w/cable lanyard 1 ZZ-ZZ-ZZZZ I-- 1 08-OS-35ST I-- Vacuum System: SSCOR regulator/gauge panel in A/A 1 NOTE: (1) ON/OFF Button/Icon in the Rear Switch Panel Display 08-OS-3501 < I-- Collection Canister w Clip: Bemis, 1200 CC Capacity-J3043 retention 1 compliant LOCATION: In Action Area, to the left of A/A console box. with SSCOR canister retention clip 08-OS-3100 I-- Vacuum Outlet No 1: Amico- Ohio Style 1 08-0S-040AI--LOCATION:Action Area a 08-OS-3115 < I--Adapter, Vacuum Outlet: w/Suction system ADAP-03 SHIP LOOSE ADAP-03 suction plug adapter with barbed fitting » requires an updated note in the SHIP LOOSE SECTION « 08-OS-3503 I-- Vacuum Pump: 49 State 1 08-0S-35L8I--Location:M-1a Compartment 1 08-OS-35VN I-- PORTABLE SUCTION UNIT : NONE 1 08-ZZ-ZZZZ 1 S TRIM/DOOR ASSEMBLY- CELL 5 1 NOTE: Make Cover From Bottom of ALS to Top of M7 Compartment Out of Diamond Plate Material on Compartment Side. The Section That Separates the ALS from the Compartment(Reference 17ML 20173) 09-00-001A I-- Soft Touch Trim Kit: None 1 09-00-002S I-- Interior window and aluminum trim with standard satin finish- std 1 09-00-0001 1 09-00-0002 ****************DOOR DEPARTMENT- Full Mod****************** 1 02-BT-C853 S < I--Handles, Ext: Tri-mark 030-1875, Free Float, Black finish 1 Keyed 2002 02-BT-C85A < --Interior Release:All Entry Doors, with bezel Emergency Access 1 All three Entry Doors, top and bottom latches. Bezel installed around emergency release. 09-MH-253N I--Rear Entry Assist Handle not required 1 09-B1-ED00 Entry Door Panels, Windows and Hardware 1 08-MH-0020 I--Interior Grab Handle Color: Yellow Antimicrobial 1 08-MH-0318 < I-- Grab Handle, CS Entry: (1) 3-pt "L"Shaped 90, Yellow Antimicrobial New 1 5-12-16 Install CS door handle after cabinet installation. Close the doors and check for pinch points or cabinet interference s:/21/2s2s P-•- 24 PART NO S DESCRIPTION QTY 08-MH-03E8 I--Grab Handles, Rear Access:(2) 3-pt "L"Shaped 90, Yellow Antimicrobial 1 09-MH-2205 XS < I-- Grab Handle, (2), Black, Allegis Corp. #9/01228 2 Located : (1)on C/S and (1)on S/S Inside Rear Access Doors 09-AS-2300 S < --Door Panels:Mica Upper/Stainlessy/Smooth Aluminum Lower 1 The mica will be laminated to smooth aluminum.Lower Panels will not be DA Sanded. 09-AS-2520 S I-- Curbside Lower Door Panel: Smooth Aluminum 1 09-E1-23C1 < I--Single Color Engraved LOGO: (3) Entry Doors, Customer Logo, requires 1 clear image Single color Engraved onto panel, Back side lighted with LED lighting. ENG >to AEV engraving dept 09-W1-0200 I--UPPER Windows:RA Doors, Fold Out Tinted Glass 17.3"Wx 19.3"1-! 1 09-WI-0601 I--UPPER Window: CS Access, Fold Out Glass,std tint ILOS 1 09-DR-WTO1 S < Walk through/Talk Through: NONE DELETE 1 NOTE: Solid Bulkhead No Window and No Door 09-FM-1093 Dri-Dek Compt Floors and shelves, Black 1 09-FM-11F0 J--Dri-Dek EDGES:Black, Beveled frontal edges 1 ZZ-ZZ-ZZZZ I-- 1 07-ZZ-ZZZZ -- 1 09-ZZ-ZZZZ 1 ELECTRICAL Point to Point-CELL 6 1 05-EL-4962 S < I--Light, Kinequip 440206S 4", stainless surface mount housing Additiional 1 Location: Above Electrical Cabinet in Center Pad to Work With Timer and Dome Lights on High 06-EC-1390 I-- IV Warmer No 1: NONE 1 06-EC-1419 I-- IV Warmer No2 None required 1 10-00-0001 S < R/S EXHAUST FAN NENT 1 NOTE: Exhaust Vent to be Installed on Upper C/S Rear Wall. Fan to Have Three Speed Switch(Hi-Med-Low) In Rear LX-1 Switch Panel 10-EC-2700 S < I--Refrigerator, Norcold 1.7 Cu Ft, 12VDC/125VAC, 1 NOTE: Fridge Door to Hinge Left 06-EC-4200 S < I--Fan, Pancake, 12V, EACH 1 NOTE: Install a Pan Cake Fan To Help Move Air From Norcold Fridge 10-EC-3200 S I--Location:Rear of Cabinet B-1 (See Drawing) 1 11-YZ-0907 < I--Non-Compliant to 3.11.3 J3058, cabinets shall not come open in transit 1 Item is not tested to J3058, or not rated. 11-ZZ-0903 < I--CAAS Exception to C.11.3 Storage Compartments and Cabinets Design 1 An Exception has been taken to one of the following conditions, C.11.3. subpart 4 Doors shall have positively locked latches that are designed to remain closed during transports. 10-IL-02ST Action Area Light: 12V, LED, Surface Mount 1 10-IL-02L7 I--Light Location:Action Area 1 10-IL-03ST S Extended Action Area Light: 12V, LED, Surface Mount 1 10-IL-02L9 S I--Light Location:Bottom of Cabinet B-2 1 10-ZZ-ZZZZ S 02 Viewing Window to be Installed In Front Face of A/A Wall#3 (See Drawing) 1 UPHOLSTERY-CELL 7 1 11-00-UB95 < Upholstery Color:Black(Black) UPHO-6905 1 UPHO-6905 11-00-UC11 1--Center Trough Upholstery Color: Color Key to Rest of Truck 1 ZZ-ZZ-ZZZZ I-- 1 1:/2./2.21 Pa.- 25 PART NO S DESCRIPTION QTY 11-00-UT05 Up oin ype: vacuum orme. - earn ess 1 11-SB-0005 Squad Bench seat cushion cut-outs: None 1 11-SB-0003 I-- Post And Wheel Cups: NONE 1 11-SE-CSPD Head Protection: Pad over CS Entry Door 1 11-SE-REPD Head Protection: 2" Pad over Rear Access Doors, Full Width 1 S r PAINT- STRIPES- DECALS 1 Console Speed Lined Black NOTE: DRIP RAILS TO BE PAINTED RED TO MATCH BODY COLOR 12-PT-UNCT I-- Undercoating : Per QVM Guidelines, STD 1 12-DC-0001 Reflective Tape: On painted edges of Exterior Door Frame 1 12-DC-GA10 Compartment Finish: Diamond Plate Standard 1 12-PT-0100 S Primary(Over All) Color: KEN3013 1 12-DC-0002 < I--Flip Step Reflective/Prismatic Tape:Red/White/R/W/R/W/R 1 Install on rearward facing edge of flip up step at rear module entry REV Tape-RS 12-PT-0112 I-- Tape Stripe: NONE(KKK-F Deviation) 1 11-YZ-0962 I--Non-Compliant toKKK-F 3.16.2;Exterior Safety stripe to be Orange 1 12-PT-0600 I--Paint Belt:NONE 1 12-PT-1000 S < I--Pin Stripe: Black Reflective In "C" Channel Skirt Rails 1 NOTE: Install Black Reflective Stripe In "C" Channel Skirt Rails 12-ZZ-ZZZZ 12-PT-RF01 < I--Roof Paint: Color and finish quality to be GLOSSY t The roof shall be painted, with a glossy finish, but not sanded and buffed. ZZ-ZZ-ZZZZ 12-PT-1301 Special Striping: Chevron Items: NONE 1 12-PT-2000 Lettering: NONE 1 12-ZZ-ZZZZ I-- 1 12-PT-DRIS S < Drip Rails:Bright Alum, De-burred& rounded corners (SHIPPED LOOSE) 1 Include a drip rail over the C/S Entry Door shipped loose. Add Shop Note to Shipped Loose Section of W/O NOTE: Add a Drip Rail to the M4 Compartment With Rivets NOTE: DRIP RAILS TO BE PAINTED RED TO MATCH BODY COLOR 12-ZZ-ZZZZ 1 DETAIL-SHIP LOOSE ITEMS 1 12-PT-DRIZ S < I--Drip Rails: Detail-Refer to Paint Section for Drip Rail Information (Ship 1 Loose) Include a drip rail over the C/S Entry Door. NOTE: Add a Drip Rail to the M4 Compartment With Rivets NOTE: DRIP RAILS TO BE PAINTED RED TO MATCH BODY COLOR 13-00-0200 I-- *Check front of W/O under chassis section for Add' items' 1 13-10-XMOO I-- Owner's Manual USB Flash Drive ship loose 1 13-10-XMAO I-- Printed Owner's Manual Not Required 1 34-OS-1400 Amico 02 Minder, Transducer: NONE 1 13-00-0001 S < (4) Placard Holder, 12"x 12", with Placards Top Load, Aluminum "U"Trim style 1 SHIP LOOSE 13-GL-0000 Glove Holder, Ship Loose: NONE 1 13-KK-KDEC Decals: KKK/DOT Pkg, Blue/White reflective- Ship Loose 1 13-RF-STAS I-- Decals: 32" Star of Life- Ship Loose 1 13-KK-NSSB Decals: NO SMOKING & SEATBELT. installed, cab & pt. area. 1 13-KL-0010 AEV Logos: Installed on unit per AEV standard locations 1 •:/2,/2121 P.se 26 PART NO S DESCRIPTION QTY 13-MH-05ST < Fire Extinguisher, 5 pound, shipped loose, Std 1 Part No: EXTI-01 11-ZZ-0932 < I-- Exception to C.16.1 1 Required Two fire extinguishers installed by FSAM 1 Fire extinguishers were not installed iwth one in the driver's cab, one in the patient compartment at the time of departure from the final stage Ambulance Manufacturer. 13-MH-10A0 Reflector Pkg: Body -2ea, Side Fr Amber, Side Rear Red, Rear Red 1 13-OX-1702 Regulator, Oxygen: Has LX1 Transducer Ship loose 1 11-YZ-0911 I-- Non-Compliant to 3.12 Change notice 11, Oxygen regulator not installed 1 13-SB-0003 Post And Wheel Cups: NONE 1 13-SP-TIRE Spare Tire: Refer To Chassis Section to See if it gets one. 1 34-XX-0001 Primary Cot: NONE included 1 34-XX-0002 Secondary Stretcher: NONE included 1 34-XX-5000 < Indemnification Statement 1 The purchaser agrees to defend, indemnify and hold REV harmless from any claims, costs (including actual attorneys' fees), damages and liabilities caused in whole or in part by any alteration or modification of, or changes or additions to the Purchased Products OR use of product for purposes it was not designed or intended for. == 164-172 x 95 T-9 Base 4300LP- 15.012 01/30/20== 1 GENERAL CONVERSION 1 03-07-004P S 2021 164"Medium Duty Type 9 International MV-607(2020 FSA Cony PKG) 1 36-AA-0001 WORK ORDER STATUS: 1 00-90-0301 I-- For Confirmation 1 36-00-0001 I-- CHANGE ORDER POLICY 1 36-00-0010 < I-- After Confirmation, Prior to Engineering 1 Change Fee is$50 Per Item, Plus Option Cost 36-00-0020 < I--After Confirmation, After Engineering Start 1 Change Fee is$100 Per Item, Plus 150% Option Cost Special order or non-stocking parts that are purchased for any ordered option that is subsequently deleted will be charged for and shipped loose. 36-00-0030 < I--After Confirmation, After Production Start 1 Change Fee is $100 Per Item, Plus 200% Option Cost Special order or non-stocking parts that are purchased for any ordered option that is subsequently deleted will be charged for and shipped loose. 36-EO-0001 I--""*END OF ORDER"' 1