PERMIT DOCUMENTS
BQQSPWFE
%·¯¤±¨¤¢¤ ²¨¢¤ ΔΜΛΙ
TUSVDUVSF
CCC 1326310
ȨΔΕΐȩ ΖΘΑ-1826
dpbezs!2201:03132
CAGE: 4QVT3NAICS: 238160
www.AMBATTROOFING.com
MEMBER
0 ±³¨¢¨¯ ³¨¦ #®³± ¢³®±
SOUTHEASTFLORIDA
Where Quality is Policy!
-¸ 3 ¥¤ &«®±¨£ (®¬¤
Date:11/01/2021
PROPERTY:
Name:Whalers Cove
Address: 2301 S. Congress Ave
Boynton Beach, FL 33426
VALUATION
Building #17 Unit 1723
Description of work: Rebuild 8-10' of valley to resolve leak in guest bedroom.Price $$1,510.00
Total Valuation Roof Repair:Total $$1,510.00
BQQSPWFE
TUSVDUVSF
AMBATT ROOFING INC.
dpbezs!2201:03132
931 VILLAGE BLVD., STE 905-284
WEST PALM BEACH, FL 33409
STATE LIC. #CCC1326310PHONE: (561) 792-1826
www.AMBATTROOFING.com
Structural Information/Drawing
Roof Repair
Date: 11/01/2021
Name: Whalers Cove ApartmentsDescription:Roof Repair
Address: 2301 S Congress AveCustomer Phone: ( 561) 369-3145
PROJECT DETAILS
Bldg.#: 17Unit(s): 1723
Scope of Work:
Remove existing materialsin valley, install truss and/or replace plywoodand/or fascia"if necessary", install ASTM 30# felt,
install valley metal and prime,install modified tile underlayment, Replace existing tiles
TOTAL BUILDING SF: 4618 PITCH: 5:12
N
Unit 1723 Guest Bedroom (8-10valley)
W
E
S
Note:
AREA 1: 8-10' AREA 2: AREA 3: AREA 4:
TOTAL REPAIR(S) AREA: 8-10
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
Miami, Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION
T (786) 315-2590 F (786) 315-2599
www.miamidade.gov/economy
NOTICE OF ACCEPTANCE (NOA)
Gardner Asphalt Corporation
th
4161 W. 7Avenue
Tampa, FL. 33605
S COPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER -Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this product
or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is
determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein, and hasbeen designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
D ESCRIPTION: Gardner Underlayments
L ABELING:Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.
R ENEWALof this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
T ERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
A DVERTISEMENT:The NOA number preceded bythe words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
I NSPECTION:A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revisesNOA# 18-0409.06and consists of pages 1 through 6.
The submitted documentation was reviewed by Freddy Semino
NOA: 18-1109.03
Expiration Date: 03/28/23
Approval Date: 01/03/19
Page 1of 6
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
R OOFING C OMPONENT A PPROVAL
Roofing
Category:
Underlayment
Sub-Category:
Asphalt
Material:
T RADE N AMES OF P RODUCTS M ANUFACTURED OR L ABELED BY A PPLICANT:
TestProduct
ProductDimensionsSpecificationDescription
ASTM D 226 Type IIAsphalt Saturated Felt underlayment, 2
APOC Tuff-Felt 26
square #30.
Manufacturing
Location #1, 2
ASTM D 226 Type IIAsphalt Saturated Felt underlayment, 2
United FGUR20
square #30.
Manufacturing
Location #1, 2
ASTM D 226 Type IIAsphalt Saturated Felt underlayment, 2
APOC 25
square #30.
Manufacturing
Location #1, 2
ASTM D 226 Type IIAsphalt Saturated Felt underlayment, 2
No. 30 ASTM
square #30.
Manufacturing
Location #1, 2
ASTM D 226 Type IAsphalt Saturated Felt underlayment, 4
APOC Tuff-Felt 46
square #15.
Manufacturing
Location #1, 2
ASTM D 226 Type IAsphalt Saturated Felt underlayment, 4
United FGUR10
square #15.
Manufacturing
Location #1, 2
ASTM D 226 Type IAsphalt Saturated Felt underlayment, 4
APOC45
square #15.
Manufacturing
Location #1, 2
ASTM D 226 Type IAsphalt Saturated Felt underlayment, 4
No. 15 ASTM
square #15.
Manufacturing
Location #1, 2
ASTM D 226 Type IIAsphalt Saturated Felt underlayment, 1
United FGUR70
square #30.
Manufacturing
Location #1, 2
NOA: 18-1109.03
Expiration Date: 03/28/23
Approval Date: 01/03/19
Page 2of 6
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
T RADE N AMES OF P RODUCTS M ANUFACTURED OR L ABELED BY A PPLICANT:
TestProduct
ProductDimensionsSpecificationDescription
ASTM D 226 Type IISynthetic roof underlayment comprised
GatorSkin
of layers of polyolefin film.
Manufacturing
Location #3
ASTM D 226 Type IISynthetic roof underlayment comprised
GatorSkin-10
of layers of polyolefin film.
Manufacturing
Location #5
llsASTM D 226 Type IIHigh strength hybrid underlayment
Weather-Armor CX-L
comprised of two layers of polyolefin and
Manufacturing
polyester synthetic fabric with a thin layer
Location #3
of modified bitumen between the two
plies.
ASTM D 1970Glass fiber reinforced, polymer modified
Weather-Armor SB-1
asphalt, granulated self-adhered
Manufacturing
underlayment.
Location #4
ASTM D 1970Glass fiber reinforced, polymer modified
Gard-Lock
asphalt, granulated self-adhered
Manufacturing
underlayment.
Location #4
3
ASTM D 197060-mils.thick (nominally), self-adhering
Weather-Armor HT
membrane composed of elastic polymers,
Manufacturing
bitumen, glass reinforcements and a cross
Location #4
laminated sheet surfacing.
3
TAS 10360-mils.thick (nominally), self-adhering
Weather-Armor FT
membrane composed of elastic polymers,
Manufacturing
bitumen polyester and glass
Location #4
reinforcement.
TAS 10360-mils.thick (nominally), self-adhering
Eagle-Armor by Apoc
membrane composed of elastic polymers,
Manufacturing
bitumen polyester and glass
Location #4
reinforcement.
M ANUFACTURING L OCATIONS:
Tacoma, WA.
1.
Eutaw, AL.
2.
Hangzhou, China.
3.
Springville, AL.
4.
Tampa, FL.
5.
NOA: 18-1109.03
Expiration Date: 03/28/23
Approval Date: 01/03/19
Page 3of 6
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
E VIDENCE S UBMITTED:
Test AgencyTest IdentifierTest Name/ReportDate
PRI Construction MaterialsGGI-100-02-01ASTM D 22606/22/12
TechnologiesGGI-101-02-01ASTM D 22606/22/12
GGI-132-02-01ASTM D 22604/28/15
GGI-176-02-01ASTM D 22609/26/16
GGI-178-02-01ASTM D 197010/25/16
GGI-194-02-01ASTM D 197008/04/17
GGI-196-02-01TAS 10308/08/17
GGI-206-02-01ASTM D 22603/09/18
GGI-207-02-01ASTM D 22603/09/18
GGI-201-02-01ASTM D 162301/29/18
GGI-178-02-01ASTM D 197001/29/18
GGI-178-02-02ASTM D 197001/29/18
GGI-199-02-02ASTM D 22612/12/17
GGI-202-02-01ASTM D 162308/09/18
A PPROVED A SSEMBLIES:
Wood, Non-insulated
Deck Type 1:
19
/" or greater plywood or wood plank
Deck Description:
32
Anchor sheet mechanicallyfastened to deck.
System E(1):
One or more plies of APOC Tuff-Felt 26, United FGUR20, United FGUR70,APOC 25, No. 30
Anchor Sheet:
ASTM,GatorSkin, GatorSkin-10 or Weather-Armor CX-
end lap mechanically fastened to deck with approved nails and tin caps 6 inches o.c. minimum
at all laps and three staggered rows fastened at 12 inches o.c. minimum in the field of the roll.
Nails shall be driven flush and 90 degrees to the roof deck.
Shall be acceptable for use in approved asphaltic shingles, wood shakes, & shingles, quarry
Surfacing:
slate, metal roof applications, and as an anchor sheet in roof tile applications. Must Comply with
applicable Roofing Application Standards and Building Codes.
Wood, Non-insulated
Deck Type 1:
19
/" or greater plywood or wood plank
Deck Description:
32
Anchor sheet mechanically fastened to deck.
System E(2):
Minimum 2 plies or more of APOC Tuff-Felt 46, United FGUR10, APOC 45, or No. 15 ASTM
Anchor Sheet:
nails and tin caps 6 inches o.c. minimum at all laps and three staggered rows fastened at 12
inches o.c. minimum in the field of the roll. Nails shall be driven flush and 90 degrees to the
roof deck.
Shall be acceptable for use in approved asphaltic shingles, wood shakes, & shingles, quarry
Surfacing:
slate, metal roof applications, and as an anchor sheet in roof tile applications. Must Comply with
applicable Roofing Application Standards and BuildingCodes.
NOA: 18-1109.03
Expiration Date: 03/28/23
Approval Date: 01/03/19
Page 4of 6
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
Wood, Non-insulated
Deck Type 1:
19
/" or greater plywood or wood plank
Deck Description:
32
Anchor sheet mechanically fastened to deck, membrane adhered.
System E(3):
One or more plies of ASTM D 226 Type II or ASTM D 262
Anchor Sheet:
approved nails and tin caps 6"o.c. at the side lap
edge and in a grid pattern spaced 12"o.c. in the field of the roll.
3
One or more plies of Weather-Armor SB-1, Gard-Lock, orWeather-Armor HTself-adhering
Membrane:
membrane adhered to the anchor sheet with a minimum 3
Shall be acceptable for use in approved asphaltic shingles, wood shakes, & shingles, quarry
Surfacing:
slate, and metal roof applications. Must Comply with applicable Roofing Application Standards
and Building Codes.
Wood, Non-insulated
Deck Type 1:
19
/" or greater plywood or wood plank
Deck Description:
32
Anchor sheet mechanically fastened to deck, membrane adhered.
System E(4):
Anchor Sheet:
approved nails and tin caps 6"o.c. at the side lap
edge and in a grid pattern spaced 12"o.c. in the field of the roll.
3
One or more plies of Weather-Armor FTor Eagle-Armor by Apocself-adhering membrane
Membrane:
or
3
Surfacing:
Weather-Armor FTand Eagle-Armor by ApocShall be acceptable for use in approved
asphaltic shingles, wood shakes, & shingles, quarry slate, metal roof, and mechanically
fastened roof tile applications.
3
Weather-Armor FTand Eagle-Armor by Apocmay be used with any approvedadhered
roof tile system as specified in their current NOA using the following tile adhesives with
current NOA:
-160
Must Comply with applicable Roofing Application Standards and Building Codes.
L ABELING:
All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo, city,
state and the following statement: "Miami-Dade County Product Control Approved" or the Miami-Dade County
Product Control Seal as shown below.
NOA: 18-1109.03
Expiration Date: 03/28/23
Approval Date: 01/03/19
Page 5of 6
BQQSPWFE
TUSVDUVSF
dpbezs!2201:03132
B UILDING P ERMIT R EQUIREMENTS:
Application for building permit shall be accompanied by copies of the following:
This Notice of Acceptance.
1.
Any other documents required by the Building Official or applicable building code in order to properly evaluate
2.
the installation of this material.
L IMITATIONS:
Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
1.
fire ratings of this product.
This acceptance is for prepared roofing applications. Minimum deck requirements shall be in compliance
2.
with applicable building code.
3
Weather-ArmorSB-1, and Weather-Armor HT
3.
literature for product compatibility.
Gardner Underlayments listed herein are components used in roof assemblies. Roof assemblies are approved
4.
under specific assembly Notice of Acceptance.
APOC-Tuff Felt 26, United FGUR20, APOC 25, No. 30 ASTM, APOC-Tuff Felt 46, United FGUR10,
5.
APOC 45, No. 15 ASTM,United FGUR70, GatorSkin,GatorSkin-10and Weather Armor CX-L listed
herein shall not be left exposed as a temporary roof for longer than 30 days of application.
Gard-Lock and Weather Armor SB-1 listed herein shall not be left exposed as a temporary roof for longer
6.
than 90 days of application.
3, 3
Weather-Armor HTEagle-Armor by Apocand Weather-Armor FTlisted herein shall not be left exposed
7.
as a temporary roof for longer than 180 days of application.
Gardner Underlayments listed hereinmay be used with any approved roof covering Notice of Acceptance
8.
listing Gardner Underlayments listed hereinas a componentpart of an assembly in the Notice of Acceptance.
If Gardner Underlayments listed hereinis not listed; a request may be made to the Authority Having
Jurisdiction (AHJ) or the Miami-Dade County Product Control Department for approval provided that
appropriate documentation is provided to detail compatibility of the products, wind uplift resistance, and fire
testing results.
For fire classification of specific roof assemblies using Gardner Underlayments listed herein refer to a
9.
current Approved Roofing Materials Directory for fire ratings of this product.
All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
10.
and Rule 61G20-3 of the Florida Administrative Code.
END OF THIS ACCEPTANCE
NOA: 18-1109.03
Expiration Date: 03/28/23
Approval Date: 01/03/19
Page 6of 6