Loading...
PERMIT DOCUMENTS N EMO|etc. A PPENDIX 1:A TTACHMENT R EQUIREMENTS FOR W IND U PLIFT R ESISTANCE TABLEDECKAPPLICATIONTYPEDESCRIPTIONPAGE 1AWoodNew or Reroof (Tear-Off)A-1Bonded Insulation, Bonded Roof Cover5 1BWoodNew or Reroof (Tear-Off)A-2Mech.Attached Anchor Sheet, Bonded Insulation, Bonded Roof Cover6-8 1CWoodNew, Reroof (Tear-Off) or RecoverBMech. Attached Base Insulation, Bonded Top Insulation, Bonded Roof Cover8 1DWoodNew, Reroof (Tear-Off) or RecoverCMech.Attached Insulation, Bonded Roof Cover9-10 1EWoodNew, Reroof (Tear-Off) or RecoverDInsulated, Mech. Attached Base Sheet, Bonded Roof Cover11-13 1F-1WoodNew, Reroof (Tear-Off)ENon-Insulated, Mech. Attached Base Sheet, Bonded Roof Cover13-16 1F-2WoodNew, Reroof (Tear-Off) or RecoverENon-Insulated, Mech. Attached Base Sheet, Bonded Roof Cover16-18 1GWoodNew or Reroof (Tear-Off)FNon-Insulated, Bonded Roof Cover18 2ASteel or Structural concreteNew, Reroof (Tear-Off) or RecoverBMech. Attached Base Insulation, Bonded Top Insulation, Bonded Roof Cover19-21 2BSteel or Structural concreteNew, Reroof (Tear-Off) or RecoverCMech. Attached Insulation, Bonded Roof Cover22-26 2CSteel or Structural concreteNew, Reroof (Tear-Off) or RecoverDInsulated, Mech. Attached Base Sheet, Bonded Roof Cover27-29 3AStructural concreteNew or Reroof (Tear-Off)A-1Bonded Insulation, Bonded Roof Cover30-39 3BStructural concreteNew or Reroof (Tear-Off)A-3Bonded Temp Roof/Vapor Barrier, Bonded Insulation, Bonded Roof Cover40 3CStructural concreteNew or Reroof (Tear-Off)FNon-Insulated, Bonded Roof Cover40 4ALWIC / steelNew or Reroof (Tear-Off)A-1Bonded Insulation, Bonded Roof Cover41-42 4BLWIC / structural concreteNew or Reroof (Tear-Off)A-1Bonded Insulation, Bonded Roof Cover43-46 4CLWIC / structural concreteNew, Reroof (Tear-Off)A-1Bonded Vapor Barrier, Bonded Insulation, Bonded Roof Cover47-48 4DLWIC / steelNew or Reroof (Tear-Off)A-2Mech. Attached Anchor Sheet, Bonded Insulation, Bonded Roof Cover49-51 4ELWIC / steel or struct. conc.NeworReroof (Tear-Off)ENon-Insulated, Mech. Attached Base Sheet, Bonded Roof Cover52-57 4FLWIC / steelReroof (Tear-Off) or RecoverENon-Insulated, Mech. Attached Base Sheet, Bonded Roof Cover57 4GLWIC / steelReroof (Tear-Off)FNon-Insulated, Bonded Roof Cover58 5ACementitious wood fiberNew or Reroof (Tear-Off)A-1Bonded Insulation, Bonded Roof Cover59 5BCementitious wood fiberNew or Reroof (Tear-Off)or RecoverA-2Mech. Attached Anchor Sheet, Bonded Insulation, Bonded Roof Cover60 5CCementitious wood fiberReroof (Tear-Off) or RecoverCMech. Attached Insulation, Bonded Roof Cover61 5DCementitious wood fiberNew, Reroof (Tear-Off)or RecoverENon-Insulated, Mech. Attached Base Sheet, Bonded Roof Cover61 6AExisting gypsumReroof (Tear-Off)A-1Bonded Insulation, Bonded Roof Cover62-64 6BExisting gypsumReroof (Tear-Off)A-2Mech. Attached Anchor Sheet, Bonded Insulation, Bonded Roof Cover64-65 6CExisting gypsumReroof (Tear-Off)CMech. Attached Insulation, Bonded Roof Cover65 6DExisting gypsumReroof (Tear-Off)ENon-Insulated, Mech. Attached Base Sheet, Bonded Roof Cover66 7AVariousRecoverA-1Bonded Insulation, Bonded Roof Cover67-74 7BVariousRecoverFNon-Insulated, Bonded Roof Cover74 NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 1of 74 N EMO|etc. The following notes apply to the systems outlined herein: 1.The roof system evaluation herein pertains to above-deck roof components. Roof decks and structural members shall be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction. 2.Unless otherwise noted, fastenersand stress plates for insulation attachment shallbeas follows. Fasteners shall be of sufficient length for the following engagements: Wood Deck:OMG #14 Roofgrip with Flat Bottom Plate(Accutrac), OMG HD with OMG 3 in. Galvalume Steel Plate, Dekfast #1TrufastHD with Metal Insulation Plates. Minimum 0.75-inch plywood penetration or minimum 1-inch wood plank embedment. Steel Deck:OMG #12 or #14 Roofgrip with Recessed or Flat Bottom Plate(Accutrac), OMG #12 Standard or HD with OMG 3 in. Galvalume Steel P Insulation Plate, TrufastDP or HD with or . Minimum 0.75-inch steel penetration and engage the top flute of the steel deck. Structural Concrete:OMG #14 Roofgrip with Recessed or Flat Bottom Plate(Accutrac), OMG HD or CD-10 with OMG 3 in. Galvalume Steel P Plate, TrufastHD or CF with . Minimum 1-inch embedment. Fasteners installed with a pilot . 3.Unless otherwise noted, insulation may be any one layer or combination of FBC Approved (Local or Statewide) board(s)that meet FBC 1505 and, for foam plastic, FBC Chapter 26, when installed with the roof cover. 4.Minimum 200 psi, minimum 2-inch thickFBC Approvedlightweight insulating concrete may be substituted for rigid insulation board for System TypesB, C or D, whereby fasteners are installed through the lightweight insulating concreteto engage the structural deck. The structural deck shall be of equal or greater type, thickness and strength to the steel and structural concrete deck listings. Roof decks and structural members shall be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction. This is a wind uplift resistance allowance and does not purport to address non-wind-uplift-related issues, such as deck venting or moisture levels within the LWIC and the potential effect on overlying components. 5.Preliminary insulation attachment for System Type D:Unless otherwise noted, refer to Section 2.2.10.1.3of FM Loss Prevention Data Sheet1-29(February 2020). 6.Unless otherwise noted, insulation adhesive application rates are as follows. Ribbon or bead width is at the time of application; the ribbons/beads shall expand as no Hot asphalt(HA):Full coverage at 25-30 lbs/square Ashland, Inc.Pliodeck(A-PD):Continuous 0.75inch wide ribbons, 12-inch o.c.Ribbons of subsequent layers shall be perpendicular to those in the layer below. DupontINSTASTIK Quik Set Commercial RoofingAdhesive(D-IS):Continuous 0.75to 1 inch wide ribbons, 12-inch o.c. ICP Adhesivesand SealantsPolyset BOARD-MAX:Continuous 3-inch ribbons, 12-inch o.c. ICP Adhesivesand SealantsPolyset CR-20:Continuous 2.5 to 3-inch wide ribbons, 12-inch o.c. MillenniumOne Step Foamable Adhesive(M-OSFA):Continuous 0.25to 0.5-inch wide ribbons, 12-inch o.c. Millennium PG-1 Pump Grade Adhesive(M-PG1):Continuous 0.5to 0.75-inch wide ribbons, 12-inch o.c. OMG OlyBond 500 or OlyBond Green(OB500):Continuous 0.75-inch wide ribbons, 12-inch o.c. (PaceCart,SpotShotor Canister) Note: When multiple layers(s) of insulation and/or coverboard are installed in ribbon-applied adhesive, boards shall be staggered from layer-to-layer. Note: The maximum edge distance from the adhesive ribbon to the edge of the insulation board shall be not less than one-half the specified ribbons spacing. 7.Unless otherwise noted, all insulations are flat-stock or taper board of the minimum thickness noted. Tapered polyisocyanurateat the following thickness limitationsmay be substituted with the following Maximum Design Pressure (MDP) limitationsxceeds that listed for a particular system in the tables, then the thinner board listed below may be used as a drop-in for the equivalent thicker material listed in the table: Ashland, Inc.Pliodeck(A-PD) @ 12-inch o.c.MDP-105.0 psf(Min. 1.0-inch) Ashland, Inc.Pliodeck(A-PD) @ 6-inch o.c.MDP-277.5 psf(Min. 1.0-inch) DupontINSTASTIK Quik Set Commercial RoofingAdhesive(D-IS):MDP-120.0 psf(Min. 1.0-inch) ICP Adhesivesand SealantsPolyset CR-20:MDP-117.5 psf(Min. 1.0-inch) Millennium One Step Foamable Adhesive(M-OSFA):MDP-157.5 psf(Min. 1.0-inch) Millennium PG-1 Pump Grade Adhesive(M-PG1):MDP-157.5 psf(Min. 1.0-inch) OMG OlyBond 500(OB500):MDP-45.0psf(Min. 0.5-inchMulti-Max FA3) OMG OlyBond 500 (OB500):MDP-187.5psf(Min. 0.5-inchISO 95+ GL) OMG OlyBond 500 (OB500):MDP-315.0 psf(Min. 0.5-inchENRGY 3) OMG OlyBond 500 (OB500):MDP-487.5 psf(Min. 0.5-inchACFoam II) 8.For adhered roof insulation and board-size: Unless otherwise noted, refer to Section 2.2.10.6.2of FM Loss Prevention Data Sheet 1-29 (February 2020). NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 2of 74 N EMO|etc. 9.For mechanically attached components or partially-bonded insulation, the maximum design pressure for theselected assembly shall meet or exceed at least the Zone 1 PRIME design pressure determined in accordance with FBC Chapter 16. Elevated pressure zones shall employ an attachment density designed by a qualified design professional to resist the elevated pressure criteria. Commonly used methods are ANSI/SPRI WD1, FM Loss Prevention Data Sheet 1-29, Roofing Application Standard RAS 117 and Roofing Application Standard RAS 137. Assemblies marked with an asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention Data Sheet 1-29 (February 2020) for Zone 2/3 enhancements. 10.For assemblies with all components fully bonded, the maximum design pressure for the selected assembly shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16. No rational analysis is permittedfor these systems. 11.For mechanically attached components over existing decks, fasteners shall be tested in the existing deck for withdrawal resistance. A qualified design professional shall review the data for comparison to the minimum requirements for the system. Testing and analysis shall be in accordance with ANSI/SPRI FX-1or Testing Application Standard TAS 105. 12.For bonded insulation or membrane over existing substrates in a re-roof (tear off) or recover installation, the existing deck or existing roof surface shall be examined for compatibility with the adhesive to be installed. If any surface conditions exist that bring system performance into question, field uplift testing in accordance shall be conducted on mock-ups of the proposed new roof assembly. For bonded insulation or membrane over existing substrates in a recover installation, the existing roof system shall be capable of resisting project design pressures on its own merit to the satisfaction of the Authority Having Jurisdiction, as documented through field uplift testing. Field uplift testing shall be in accordance with ASTM E907, FM Loss Prevention Data Sheet 1-52 or Testing Application Standard TAS 124. 13.Refer to FBC 1511 for requirements and limitations regarding recover installations. For Structural Concrete Deck or Recover Applications using System Type D, the insulation is optional. Alternatively, an FBC Approved insulation board or coverboardmay be used as a separation layer. Board products shallbe preliminarily attached prior toroof cover installation(Note 5 herein). The separator component shall be documented as meeting FBC 1505 and, for foam plastic, FBC Chapter 26, when installed with the roof coverin Recover applications. 14.Lightweight insulating concrete (LWIC) shall be cast in accordance with FBC Section 1917 to the satisfaction of the Authority Having Jurisdiction. For systems where specific LWIC is referenced, refer to current LWIC Product Approval for specific deck construction and limitations. Unless otherwise noted,for systems where specific LWIC is not referenced, the minimum design mix shall be 300 psi. In all cases, the minimum top-coat thickness is 2-inches. For LWIC over structural concrete, reference is made to FBC Section 1917.4.1, Point 1-existe using only foaming agent (ASTM C896), water and Portland cement (ASTM C150), with no proprietary additives, in accordance with procedures adopted by Miami-Dade BCCO (FBC CER1592). Use of these listings in new construction or re-roof (tear-off) applications is at the discretion of the Designer or Record and Authority Having Jurisdiction. 15.Unless otherwise noted, refer to the following references for bondedapplications. M EMBRANE /A DHESIVE C OMBINATIONS REFERENCELAYERMATERIALAPPLICATION Base Ply:Flintlastic Base 20,Flintlastic Poly SMS Base,Flintlastic Ultra Poly SMS Base Note:Base ply cures overnight prior to application of the ply or cap ply. FlintBond Brush or Karnak No. 81 Cold Process Modified Bitumen SBS-CA1 Ply:Flintlastic Base 20,Flintlastic Poly SMS Base,Flintlastic Ultra Poly SMS Base Adhesive Brush Grade at 1 gal/square Flintlastic FR Cap 30,Flintlastic FR Cap 30 CoolStar,Flintlastic FR-P,Flintlastic FR-P CoolStar,Flintlastic Cap Ply: Premium FR-P, Flintlastic Premium FR-P CoolStar,Flintlastic GMS,Flintlastic GMS CoolStar BP-CA2Base Ply:Glasbase,All Weather/Empire Base,Flexiglas Base,Flintlastic Base 20 Base Ply:Flintlastic Base 20,Flintlastic Poly SMS Base,Flintlastic Ultra Poly SMS Base Henry #903 Adhesive at 1.5 gal/square. Ply:Flintlastic Base 20,Flintlastic Poly SMS Base,Flintlastic Ultra Poly SMS Base SBS-CA2 Flintlastic FR Cap 30,Flintlastic FR Cap 30 CoolStar,Flintlastic FR-P,Flintlastic FR-P CoolStar,Flintlastic Cap Ply: Premium FR-P, Flintlastic Premium FR-P CoolStar,Flintlastic GMS,Flintlastic GMS CoolStar BP-CA3Base Ply:Glasbase,All Weather/Empire Base,Flexiglas Base,Flintlastic Base 20 Base Ply:Flintlastic Base 20,Flintlastic Poly SMS Base,Flintlastic Ultra Poly SMS Base Millennium Hurricane Force Membrane Adhesive, beads spaced Ply:Flintlastic Base 20,Flintlastic Poly SMS Base,Flintlastic Ultra Poly SMS Base 6-inch o.c. SBS-CA3 Flintlastic FR Cap 30,Flintlastic FR Cap 30 CoolStar,Flintlastic FR-P,Flintlastic FR-P CoolStar,Flintlastic Cap Ply: Premium FR-P, Flintlastic Premium FR-P CoolStar,Flintlastic GMS,Flintlastic GMS CoolStar NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 3of 74 N EMO|etc. M EMBRANE /A DHESIVE C OMBINATIONS REFERENCELAYERMATERIALAPPLICATION Base Ply:Glasbase,All Weather/Empire Base,Flexiglas Base,Flintlastic Base20 BP-AAhot asphalt at 20-40 lbs/square Ply:One or more Flintglas Ply 4,Flintglas Premium Ply 6 BP-AA2Base Ply:Yosemite Venting Basehot asphalt in 24-inch diameter spots in 30-inch gridpattern BP-AA3Base Ply:Yosemite Venting Basehot asphalt in 9-inch diameter spots in grid patternnoted herein. BP-AA4Base Ply:Yosemite Venting Basehot asphalt in 9-inch wide ribbons spaced as noted herein. Base Ply:Flintlastic Base 20,Flintlastic Poly SMS Base,Flintlastic Ultra Poly SMS Base Ply:One or more Flintlastic Base 20,Flintlastic Poly SMS Base,Flintlastic Ultra Poly SMS Base SBS-AAhot asphalt at 20-40 lbs/square Flintlastic FR Cap 30,Flintlastic FR Cap 30 CoolStar,Flintlastic FR-P,Flintlastic FR-P CoolStar,Flintlastic Cap Ply: Premium FR-P,Flintlastic Premium FR-P CoolStar,Flintlastic GMS,Flintlastic GMS CoolStar Base Ply:Flintlastic Ultra Poly SMS Base,Flintlastic Base 20 T SBS-TAPly:One or more Flintlastic Ultra Poly SMS Base,Flintlastic Base 20 Ttorch-applied Cap Ply:Flintlastic FR Cap 30 T,Flintlastic FR Cap 30 T CoolStar,Flintlastic GTS-FR,Flintlastic GTS-FR CoolStar Base Ply:One or more Flintlastic APP Base T,Flintlastic STA,Flintlastic STA Plus APP-TAtorch-applied Flintlastic STA,Flintlastic STA Plus,Flintlastic GTA,Flintlastic GTA CoolStar,Flintlastic GTA-FR,Flintlastic Cap Ply: GTA-FR CoolStar SBS-SA-HBase Ply:Black Diamond Base Sheet,Flintlastic Ultra Glass SAself-adhering(activated by overlying membrane) Base PlyBase Ply::Flintlastic SA PlyBaseFlintlastic SA PlyBase,,Flintlastic SA Mid PlyFlintlastic SA Mid Ply SBSSBS--SASAPlyPly::Flintlastic SA PlyBaseFlintlastic SA PlyBase,,Flintlastic SA Mid PlyFlintlastic SA Mid Plysselfelf--aadheringdhering Cap PlyCap Ply::Flintlastic SA CapFlintlastic SA Cap,,Flintlastic SA Cap FR CoolStarFlintlastic SA Cap FR CoolStar,,Flintlastic SA Cap FRFlintlastic SA Cap FR,,Flintlastic SA Cap FR CoolStarFlintlastic SA Cap FR CoolStar 16.Vapor barrier options for use over structural concrete deck followed byadhesive-appliedinsulation carry the following Maximum Design Pressure (MDP) limitations. The lesser of the MDP listings below vs. those in Table 3A applies: V APOR B ARRIER O PTIONS,S TRUCTURAL C ONCRETE D ECK,A DHERED I NSULATION PER T ABLE 3A, (The lesser of the MDP listings below vs. those in Table 3A applies) VAPOR BARRIER OPTION MDP PRIMERINSULATION ADHESIVE #(PSF) TYPEATTACH VB-1.FlintPrimeFlintlastic SA PlyBaseSelf-adheringOB500, 12-inch o.c.-82.5 All Weather / Empire Base Sheet; 3-inch wide side laps and 6-inch wide end Millennium Hurricane Force VB-2.NoneM-OSFA or M-PG1, 12-inch o.c.-82.5 laps are sealed with Millennium Hurricane Force Lap and Flashing AdhesiveMembrane Adhesive, max.6-inch o.c. Flintlastic Ultra Poly SMS Base Sheet; 3-inch wide side laps and 6-inch wide end Millennium Hurricane Force VB-3.Nonelaps are hot-air-welded, torch-welded or sealed with Millennium Hurricane M-OSFA or M-PG1, 12-inch o.c.-82.5 Membrane Adhesive, max.6-inch o.c. Force Lap and Flashing Adhesive VB-4.FlintPrime or FlintPrime SABlack Diamond Base Sheet, Flintlastic Ultra Glass SA or Flintlastic SA CapSelf-adheringM-OSFA or M-PG1, 12-inch o.c.-97.5 VB-5.FlintPrime or FlintPrime SABlack Diamond Base Sheet, Flintlastic Ultra Glass SA or Flintlastic SA CapSelf-adheringM-OSFA or M-PG1, 6-inch o.c.-315.0 VB-6.FlintPrimeFlintlastic GTATorch-appliedM-OSFA or M-PG1, 12-inch o.c.-420.0 VB-7.FlintPrimeFlintlastic Base 20 TorFlintlastic FR Cap 30 TTorch-appliedM-OSFA or M-PG1, 12-inch o.c.-495.0 17.1609 for determination of design wind loads. NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 4of 74 N EMO|etc. TABLE1A: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base InsulationTop InsulationRoof Cover (Note 15) Deck Sys.MDP Primer AttachAttach No.(psf) (Note1) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) S ELF-A DHERING S YSTEMS: (Optional) Additional layer(s) of base Min. 15/32-inchAPA Min. 1.5-inch FlintBoard ISO, FlintPrime or M-OSFA or insulation and/or min. 0.25-inch M-OSFA or W-1rated CDX plywood; 24-ACFoam II, FlintBoardH ISO, FlintPrime SBS-SA(Optional) SBS-SASBS-SA-60.0 M-PG1DensDeck Prime or SECUROCK M-PG1 inch spanH-ShieldSA Gypsum-Fiber Roof Board. Min. 15/32-inchAPA (Optional) Additional layer(s) of base Min. 1.5-inch FlintBoard ISO, M-OSFA or M-OSFA or FlintPrime or rated CDX plywood; 24-insulation and/or min. 0.25-inch W-2ACFoam II, FlintBoardH ISO, M-PG1, 6-M-PG1, 6-FlintPrime SBS-SA(Optional) SBS-SASBS-SA-97.5 inch span; blocked 48-DensDeck Prime or SECUROCK H-Shieldinch o.c.inch o.c.SA inch o.c.Gypsum-Fiber Roof Board. H YBRID S YSTEMS: (Optional) Additional layer(s) of base Min. 15/32-inchAPA Min. 1.5-inch FlintBoard ISO, (Optional) BP-AA, SBS-AA, M-OSFA or insulation and/or min. 0.25-inch M-OSFA or W-3rated CDX plywood; 24-ACFoam II, FlintBoardH ISO, NoneSBS-SA-HSBS-AA, SBS-TA or SBS-TA or -60.0 DensDeck Prime or SECUROCK M-PG1M-PG1 inch spanH-ShieldAPP-TAAPP-TA Gypsum-Fiber Roof Board. Min. 15/32-inchAPA (Optional) Additional layer(s) of base Min. 1.5-inch FlintBoard ISO, M-OSFA or M-OSFA or (Optional) BP-AA, SBS-AA, rated CDX plywood; 24-insulation and/or min. 0.25-inch W-4ACFoam II, FlintBoardH ISO, M-PG1, 6-M-PG1, 6-NoneSBS-SA-HSBS-AA, SBS-TA or SBS-TA or -97.5 inch span; blocked 48-DensDeck Prime or SECUROCK H-Shieldinch o.c.inch o.c.APP-TAAPP-TA inch o.c.Gypsum-Fiber Roof Board. C ONVENTIONAL S YSTEMS: Optional additional layers of base Min. 15/32-inchAPA Min. 1.5-inch FlintBoard ISO, BP-AA, SBS-(Optional) BP-AA, SBS-AA, M-OSFA or insulation, followed by min. 0.25-inch M-OSFA or W-5rated CDX plywood; 24-ACFoam II, FlintBoardH ISO, NoneAA, SBS-TA SBS-AA, SBS-TA or SBS-TA or -60.0 M-PG1DensDeck Prime or SECUROCK M-PG1 inch spanH-Shieldor APP-TAAPP-TAAPP-TA Gypsum-Fiber Roof Board Min. 15/32-inchAPA Optional additional layers of base Min. 1.5-inch FlintBoard ISO, M-OSFA or M-OSFA or BP-AA, SBS-(Optional) BP-AA, SBS-AA, rated CDX plywood; 24-insulation, followed by min. 0.25-inch W-6ACFoam II, FlintBoardH ISO, M-PG1, 6-M-PG1, 6-NoneAA, SBS-TA SBS-AA, SBS-TA or SBS-TA or -97.5 inch span; blocked 48-DensDeck Prime or SECUROCK H-Shieldinch o.c.inch o.c.or APP-TAAPP-TAAPP-TA inch o.c.Gypsum-Fiber Roof Board. NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 5of 74 N EMO|etc. TABLE1B: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-2: MECHANICALLYATTACHEDANCHORSHEET,BONDEDINSULATION,BONDEDROOFCOVER Anchor SheetBase InsulationTop InsulationRoof Cover (Note 15) Deck Sys. MDP Primer AttachAttach No.(psf) (Note 1) TypeFastenersAttachTypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) S ELF-A DHERING S YSTEMS: Glasbase, All 32 ga., 1-5/8- Min. 19/32-Weather Empire, 9-inch o.c. in 4-inch Min. 1.5-inch inch dia. tin FlintPrime inch Flexiglas Base, lap and 12-inch o.c. ACFoam II, Min. 0.25- caps with 11 or (Optional) - W-7plywood; Flintlastic Base 20; in two (2), equally FlintBoard ISO, HAinch HASBS-SASBS-SA ga. annular FlintPrime SBS-SA45.0* 24-inch Poly SMS; Ultra Poly spaced, staggered ENRGY-3, H-Shield DensDeck ring shank SA spanSMS; Yosemite center rowsor Multi-Max FA3 nails Venting Base HA full HA full 32 ga., 1-5/8- Min. 19/32-Glasbase, All 8-inch o.c. in 3-inch Min. 1.5-inch coverage or coverage or inch dia. tin FlintPrime inch Weather Empire, lap and 8-inch o.c. in ACFoam II, OB500, M-Min. 0.25-OB500, M- caps with 11 or (Optional) plywood; Flexiglas Base, Poly three (3), equally FlintBoard ISO, OSFA, A-PD, D-inch OSFA, A-PD, D- W-8SBS-SASBS-SA-52.5 ga. annular FlintPrime SBS-SA 24-inch SMS or Ultra Poly spaced, staggered ENRGY-3, H-Shield IS, ICP BOARD-DensDeckIS, ICP BOARD- ring shank SA spanSMScenter rowsor Multi-Max FA3MAX or CR-20, MAX or CR-20, nails 4-inch o.c.6-inch o.c. 32 ga., 1-5/8- Min. 19/32-8-inch o.c. in 3-inch Min. 1.5-inch FlintPrime inch dia. tin inch lap and 8-inch o.c. in ACFoam II, Min. 0.25- Yosemite Venting caps with 11 or (Optional) W-9plywood; three (3), equally FlintBoard ISO, HAinch HASBS-SASBS-SA-52.5 Base Sheetga. annular FlintPrime SBS-SA 24-inch spaced, staggered ENRGY-3, H-Shield DensDeck ring shank SA spancenter rowsor Multi-Max FA3 nails HA full HA full 32 ga., 1-5/8-Min. 0.25- Min. 19/32-Glasbase, All 8-inch o.c. in 3-inch (Optional) Min. 1.5-coverage or coverage or inch dia. tin inch FlintPrime inch Weather Empire, lap and 8-inch o.c. in inch ACFoam II, OB500, M-OB500, M- caps with 11 SECUROCK or (Optional) W-10plywood; Flexiglas Base, Poly three (3), equally FlintBoard ISO, OSFA, A-PD, D-OSFA, A-PD, D-SBS-SASBS-SA-60.0 ga. annular Gypsum-FlintPrime SBS-SA 24-inch SMS or Ultra Poly spaced, staggered ENRGY-3, H-Shield IS, ICP BOARD-IS, ICP BOARD- ring shank Fiber Roof SA MAX or CR-20, MAX or CR-20, spanSMScenter rowsor Multi-Max FA3 nailsBoard 4-inch o.c.6-inch o.c. 32 ga., 1-5/8-Min. 0.25- Min. 19/32-8-inch o.c. in 3-inch (Optional) Min. 1.5- inch dia. tin inch FlintPrime inch lap and 8-inch o.c. in inch ACFoam II, Yosemite Venting caps with 11 SECUROCK or (Optional) plywood; three (3), equally FlintBoard ISO, W-11HAHASBS-SASBS-SA-60.0 Base Sheetga. annular Gypsum-FlintPrime SBS-SA 24-inch spaced, staggered ENRGY-3, H-Shield ring shank Fiber Roof SA spancenter rowsor Multi-Max FA3 nailsBoard H YBRID S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 6of 74 N EMO|etc. TABLE1B: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-2: MECHANICALLYATTACHEDANCHORSHEET,BONDEDINSULATION,BONDEDROOFCOVER Anchor SheetBase InsulationTop InsulationRoof Cover (Note 15) Deck Sys. MDP Primer AttachAttach No.(psf) (Note 1) TypeFastenersAttachTypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Glasbase, All 32 ga., 1-5/8- Min. 19/32-Weather Empire, 9-inch o.c. in 4-inch Min. 1.5-inch inch dia. tin (Optional) inch Flexiglas Base, lap and 12-inch o.c. ACFoam II, SBS-AA, caps with 11 BP-AA, SBS-- plywood; Flintlastic Base 20; in two (2), equally FlintBoard ISO, SBS-TA or W-12HANoneN/ANoneSBS-SA-H ga. annular AA, SBS-TA 45.0* 24-inch Poly SMS; Ultra Poly spaced, staggered ENRGY-3, H-Shield APP-TA ring shank or APP-TA spanSMS; Yosemite center rowsor Multi-Max FA3 nails Venting Base 32 ga., 1-5/8- Min. 19/32-8-inch o.c. in 3-inch Min. 1.5-inch Glasbase; Flintglas (Optional) inch dia. tin inch lap and 8-inch o.c. in ACFoam II, SBS-AA, Premium Ply 6; caps with 11 BP-AA, SBS- W-13plywood at three (3), equally FlintBoard ISO, HANoneN/ANoneSBS-SA-HSBS-TA or -60.0 Yosemite Venting ga. annular AA, SBS-TA max. 24-spaced, staggered ENRGY-3, H-Shield APP-TA Basering shank or APP-TA inch center rowsor Multi-Max FA3 nails C ONVENTIONAL S YSTEMS: Glasbase, All 32 ga., 1-5/8- Min. 19/32-Weather Empire, 9-inch o.c. in 4-inch Min. 1.5-inch inch dia. tin BP-AA, (Optional) Min. 0.25-SBS-AA, inch Flexiglas Base, lap and 12-inch o.c. ACFoam II, caps with 11 SBS-AA, BP-AA, SBS-- W-14plywood; Flintlastic Base 20; in two (2), equally FlintBoard ISO, HAinch HAFlintPrimeSBS-TA or ga. annular SBS-TA or AA, SBS-TA 45.0* 24-inch Poly SMS; Ultra Poly spaced, staggered ENRGY-3, H-Shield DensDeckAPP-TA ring shank APP-TAor APP-TA spanSMS; Yosemite center rowsor Multi-Max FA3 nails Venting Base HA full HA full 32 ga., 1-5/8- Min. 19/32-Glasbase, All 8-inch o.c. in 3-inch Min. 1.5-inch coverage or coverage or inch dia. tin BP-AA, (Optional) inch Weather Empire, lap and 8-inch o.c. in ACFoam II, OB500, M-Min. 0.25-OB500, M-SBS-AA, caps with 11 SBS-AA, BP-AA, SBS- W-15plywood; Flexiglas Base, Poly three (3), equally FlintBoard ISO, OSFA, A-PD, D-inch OSFA, A-PD, D-FlintPrimeSBS-TA or -52.5 ga. annular SBS-TA or AA, SBS-TA 24-inch SMS or Ultra Poly spaced, staggered ENRGY-3, H-Shield IS, ICP BOARD-DensDeckIS, ICP BOARD-APP-TA ring shank APP-TAor APP-TA MAX or CR-20, MAX or CR-20, span SMScenter rowsor Multi-Max FA3 nails 4-inch o.c.6-inch o.c. 32 ga., 1-5/8- Min. 19/32-8-inch o.c. in 3-inch Min. 1.5-inch inch dia. tin BP-AA, (Optional) inch lap and 8-inch o.c. in ACFoam II, Min. 0.25-SBS-AA, Yosemite Venting caps with 11 SBS-AA, BP-AA, SBS- plywood; three (3), equally FlintBoard ISO, inch SBS-TA or W-16HAHAFlintPrime-52.5 Base Sheetga. annular SBS-TA or AA, SBS-TA 24-inch spaced, staggered ENRGY-3, H-Shield DensDeckAPP-TA ring shank APP-TAor APP-TA span center rowsor Multi-Max FA3 nails HA full HA full 32 ga., 1-5/8-Min. 0.25- Min. 19/32-Glasbase, All 8-inch o.c. in 3-inch (Optional) Min. 1.5- coverage or coverage or inch dia. tin inch BP-AA, (Optional) inch Weather Empire, lap and 8-inch o.c. in inch ACFoam II, OB500, M-OB500, M-SBS-AA, caps with 11 SECUROCK SBS-AA, BP-AA, SBS- W-17plywood; Flexiglas Base, Poly three (3), equally FlintBoard ISO, OSFA, A-PD, D-OSFA, A-PD, D-NoneSBS-TA or -60.0 ga. annular Gypsum-SBS-TA or AA, SBS-TA 24-inch SMS or Ultra Poly spaced, staggered ENRGY-3, H-Shield IS, ICP BOARD-IS, ICP BOARD-APP-TA ring shank Fiber Roof APP-TAor APP-TA span SMScenter rowsor Multi-Max FA3MAX or CR-20, MAX or CR-20, nailsBoard 4-inch o.c.6-inch o.c. NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 7of 74 N EMO|etc. TABLE1B: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-2: MECHANICALLYATTACHEDANCHORSHEET,BONDEDINSULATION,BONDEDROOFCOVER Anchor SheetBase InsulationTop InsulationRoof Cover (Note 15) Deck Sys. MDP Primer AttachAttach No.(psf) (Note 1) TypeFastenersAttachTypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) 32 ga., 1-5/8-Min. 0.25- Min. 19/32-8-inch o.c. in 3-inch (Optional) Min. 1.5- inch dia. tin inch BP-AA, (Optional) inch lap and 8-inch o.c. in inch ACFoam II, SBS-AA, Yosemite Venting caps with 11 SECUROCK SBS-AA, BP-AA, SBS- W-18plywood; three (3), equally FlintBoard ISO, HAHANoneSBS-TA or -60.0 Base Sheetga. annular Gypsum-SBS-TA or AA, SBS-TA 24-inch spaced, staggered ENRGY-3, H-Shield APP-TA ring shank Fiber Roof APP-TAor APP-TA span center rowsor Multi-Max FA3 nailsBoard TABLE1C: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEB: MECHANICALLYATTACHEDBASEINSULATION,BONDEDTOPINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Deck System MDP (psf) Attach No. (Note1) TypeFastenersAttachTypeBase PlyPlyCap Ply (Notes 6,7,8) H YBRID S YSTEMS: Min. 1.5-inch ACFoam FlintFast #12 or Min. 1.5-inch ACFoam II, HA, D-IS, M- Min. 15/32-inchII, FlintBoard ISO, H-#14 with 1 per 1.3 W-19FlintBoard ISO, H-Shield or OSFA, M-PG1 SBS-SA-H(Optional) APP-TAAPP-TA-67.5 2 plywood; 24-inch spanShield or FlintBoard ft FlintBoard ISO.or OB500 H ISO.Insulation Plates H C ONVENTIONAL S YSTEMS: Min. 0.5-inch Structodek Min. 1.5-inch ACFoam High Density Fiberboard (Optional) BP-AA, Min. 23/32-inch1 per 2.0 BP-AA or SBS-AA, SBS- W-20II, FlintBoard ISO, Note2Roof Insulation, min. 0.75-HASBS-AA, SBS-TA or -45.0* 2 plywood; 24-inch spanftSBS-AATA or APP-TA inch FescoBoard ENRGY 3, H-ShieldAPP-TA (homogeneous) Min. 0.25-inch SECUROCK Min. 1.5-inch ACFoam BP-AA, SBS-(Optional) BP-AA, Min. 23/32-inch1 per 2.0 Gypsum-Fiber Roof Board, SBS-AA, SBS- W-21II, FlintBoard ISO, Note2HAAA, SBS-TA SBS-AA, SBS-TA or -45.0* 2 plywood; 24-inch spanftDensDeckor DensDeckTA or APP-TA ENRGY 3, H-Shieldor APP-TAAPP-TA Prime Min. 1.5-inch ACFoam FlintFast #12 or Optional additional layer(s) HA, D-IS, M- Min. 15/32-inchII, FlintBoard ISO, H-#14 with 1 per 1.3 of base insulation followed W-22OSFA, M-PG1 APP-TA(Optional) APP-TAAPP-TA-90.0 2 plywood; 24-inch spanShield or FlintBoard ftby Min. 0.25-inch SECUROCK or OB500 ISO.Insulation PlatesGypsum-Fiber Roof board H NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 8of 74 N EMO|etc. TABLE1D: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System MDP Base Insulation LayerPrimer No.(psf) (Note 1) TypeFastenersAttachBase PlyPlyCap Ply S ELF-A DHERING S YSTEMS: Min. 15/32-inch (Optional) One or more FlintFast3 in. Insulation Min. 0.25-inch SECUROCK 1 per (Optional) SBS- W-23plywood; 24-inch layers, any combination, Plates with FlintFast #12 or NoneSBS-SASBS-SA-30.0* 2 Gypsum-Fiber Roof Board3.2 ftSA spanloose laid#14 Min. 19/32-inch (Optional) One or more FlintPrime or 1 per (Optional) SBS- W-24plywood; 24-inch layers, any combination, Min. 0.25-inch DensDeckNote 2FlintPrime SBS-SASBS-SA-45.0 2 1.3 ftSA spanloose laidSA Min. 19/32-inch (Optional) One or more FlintFast3 in. Insulation Min. 3/8-inch SECUROCK 1 per (Optional) SBS- W-25plywood; 24-inch layers, any combination, Plates with FlintFast #12 or NoneSBS-SASBS-SA-45.0* 2 Gypsum-Fiber Roof Board2.7 ftSA spanloose laid#14 Min. 19/32-inch (Optional) One or more Min. 1.5-inch ACFoam II, FlintFast3 in. Insulation FlintPrime or 1 per (Optional) SBS- W-26plywood; 24-inch layers, any combination, ENRGY 3, H-Shield, Multi-Max Plates with FlintFast #12 or FlintPrime SBS-SASBS-SA-45.0* 2 2.0 ftSA spanloose laidFA3 or FlintBoard ISO #14SA FlintFast #14 HD with Min. 15/32-inch (Optional) One or more FlintPrime or 1 per (Optional) SBS- W-27plywood; 24-inch layers, any combination, Min. 1.5-inch FlintBoard ISOFlintPrime SBS-SASBS-SA-52.5 2 1.6 ftSA spanloose laidSA Metal Insulation Plates Min. 19/32-inch (Optional) One or more Min. 1.5-inch ACFoam II, FlintPrime or 1 per (Optional) SBS- W-28plywood; 24-inch layers, any combination, ENRGY 3, H-Shield, Multi-Max Note 2FlintPrime SBS-SASBS-SA-60.0 2 1.5 ftSA span loose laidFA3 or FlintBoard ISO SA H YBRID S YSTEMS: (Optional) BP- Min. 15/32-inch (Optional) One or more FlintFast3 in. Insulation Min. 0.25-inch DensDeck; 1 per SBS-SA-AA, SBS-AA, SBS-AA, SBS- W-29plywood; 24-inch layers, any combination, Plates with FlintFast #12 or None-30.0* 2 SBS-TA or APP- DensDeckPrime2.0 ftHTA or APP-TA spanloose laid#14 TA FlintFast #14 HD with Min. 15/32-inch (Optional) One or more 1 per SBS-SA-(Optional) SBS-SBS-TA or W-30plywood; 24-inch layers, any combination, Min. 1.5-inch FlintBoard ISONone-52.5 2 1.6 ftHTA or APP-TAAPP-TA spanloose laid Metal Insulation Plates Min. 15/32-inch (Optional) One or more Min. 1.5-inch ACFoam II, 1 per SBS-SA-(Optional) BP- W-31plywood; 24-inch layers, any combination, FlintBoard ISO, ENRGY 3 or Note 2NoneSBS-AA-52.5 2 1.3 ftHAA or SBS-AA spanloose laidMulti-Max FA3 (Optional) BP- Min. 19/32-inch (Optional) One or more Min. 1.5-inch ACFoam II, 1 per SBS-SA-SBS-AA, SBS- AA, SBS-AA, W-32plywood; 24-inch layers, any combination, FlintBoard ISO, H-Shield, Note 2None-60.0 2 1.5 ftHSBS-TA or APP-TA or APP-TA span loose laidFlintBoard ISO H TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 9of 74 N EMO|etc. TABLE1D: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System MDP Base Insulation LayerPrimer No.(psf) (Note 1) TypeFastenersAttachBase PlyPlyCap Ply Min. 15/32-inch (Optional) Min. 1.5-inch, One Min. 1.5-inch ACFoam II, FlintFast3 in. Insulation (Optional) SBS- 1 per SBS-SA-SBS-AA, SBS- plywood; 24-inch or more layers, any FlintBoard ISO, H-Shield, Plates with FlintFast #12 or AA, SBS-TA or W-33None-75.0 2 1.3 ftHTA or APP-TA spancombination, loose laidFlintBoard ISO#14APP-TA H Min. 19/32-inch (Optional) One or more Min. 1.5-inch ACFoam II, 1 per SBS-SA-(Optional) SBS-SBS-TA or W-34plywood; 24-inch layers, any combination, FlintBoard ISO, ENRGY 3 or Note 2None-82.5 2 1.3 ftHTA or APP-TAAPP-TA spanloose laidMulti-Max FA3 C ONVENTIONAL S YSTEMS: Min. 0.5-inch Structodek High (Optional) BP- Min. 23/32-inch (Optional) One or more 1 per BP-AA or SBS-AA, SBS- Density Fiberboard Roof AA, SBS-AA, W-35plywood; 24-inch layers, any combination, Note 2None-45.0* 2 Insulation, min. 0.75-inch 2.0 ftSBS-AASBS-TA or APP-TA or APP-TA spanloose laid FescoBoard (homogeneous)TA BP-AA, (Optional) BP- Min. 15/32-inch (Optional) One or more Min. 0.25-inch SECUROCK SBS-AA, FlintFast #12 or #14 HD with 1 per AA, SBS-AA, SBS-AA, SBS- plywood; 24-inch layers, any combination, Gypsum-Fiber Roof Board, SBS-TA W-36None-45.0* 2 2.0 ftSBS-TA or APP-TA or APP-TA spanloose laidDensDeckor DensDeckPrimeor APP- TA TA Min. 15/32-inch (Optional for Recover) Min. Min. 0.25-inch SECUROCK FlintFast #12 or #14 HD with 1 per (Optional) APP- W-37plywood; 24-inch 1.5-inch, One or more layers, NoneAPP-TAAPP-TA-60.0 2 Gypsum-Fiber Roof Board1.5 ftTA spanany combination, loose laid BP-AA, (Optional for Concrete or (Optional) BP- Min. 19/32-inch SBS-AA, Recover) Min. 2-inch ACFoam Min. 0.5-inch SECUROCK FlintFast #12 or #14 HD with 1 per AA, SBS-AA, SBS-AA, SBS- W-38plywood; 24-inch NoneSBS-TA -60.0 2 II, FlintBoard, H-Shield or Gypsum-Fiber Roof Board1.8 ftSBS-TA or APP-TA or APP-TA spanor APP- ENRGY 3, loose laid.TA TA Min. 15/32-inch (Optional for Recover) Min. Min. 0.25-inch SECUROCK FlintFast #12 or #14 HD with 1 per (Optional) APP- W-39plywood; 24-inch 1.5-inch, One or more layers, NoneAPP-TAAPP-TA-67.5 2 Gypsum-Fiber Roof Board1.3 ftTA spanany combination, loose laid NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 10of 74 N EMO|etc. TABLE1E: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPED: INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Insulation Layer(s)(Note 13)Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) TypeAttachTypeFastenersAttachBase PlyCap Ply S ELF-A DHERING S YSTEMS: 8-inch o.c. at min. 3-inch lap Min. 19/32-inch Min. 1.5-inch, One FlintPrime or Prelim. Flintlastic SA (Optional) and 8-inch o.c. in two(2), W-40plywood; 24-inch or more layers, Note2FlintPrime SBS-SA-82.5* AttachNailBaseequally spaced, staggered SBS-SA spanany combinationSA at plates center rows FlintFast3 in. Insulation Plates with FlintFast #12 or #14; 6-inch o.c. at min. 2-inch lap Min. 15/32-inch Min. 1.5-inch, One FlintPrime or Prelim. Flintlastic SA Trufast and 6-inch o.c. in three(3), (Optional) W-41plywood; 24-inch or more layers, FlintPrime SBS-SA-97.5* AttachNailBasePlateswith DP or HD; OMG 3 in. equally spaced, staggered SBS-SA spanany combinationSA at plates Round Metal Plates with OMG center rows #14 HD FlintFast3 in. Insulation Plates with FlintFast #12 or #14; 6-inch o.c. at min. 2-inch lap Min. 15/32-inch Min. 1.5-inch, One FlintPrime or Prelim. Flintlastic SA Trufast and 6-inch o.c. in four(4), (Optional) W-42plywood; 24-inch or more layers, FlintPrime SBS-SA-127.5* AttachNailBasePlateswith DP or HD; OMG 3 in. equally spaced, staggered SBS-SA spanany combinationSA at plates Round Metal Plates with OMG center rows #14 HD H YBRID S YSTEMS: FlintFast3 in. Insulation Plates Glasbase; Flexiglas; with FlintFast #12 or #14; Min. 15/32-inch Min. 1.5-inch, One 6-inch o.c. at 4-inch lap and 6-FlintPrime or SBS-AA, Prelim. Flintlastic Base 20; Trufast W-43plywood; 24-inch or more layers, inch o.c. in three(3), equally FlintPrime SBS-SA-HSBS-TA or -97.5 AttachPoly SMS Base; Ultra Plateswith DP or HD; OMG 3 in. spanany combinationspaced, staggered center rowsSA at platesAPP-TA Poly SMS BaseRound Metal Plates with OMG #14 HD Glasbase; Flexiglas; Min. 19/32-inch Min. 1.5-inch, One 7-inch o.c. at 3-inch lap and 7-SBS-AA, Prelim. Flintlastic Base 20; W-44plywood; 24-inch or more layers, Note2inch o.c. in three(3), equally NoneSBS-SA-HSBS-TA or -105.0 AttachPoly SMS Base; Ultra spanany combinationspaced, staggered center rowsAPP-TA Poly SMS Base FlintFast3 in. Insulation Plates Glasbase; Flexiglas; with FlintFast #12 or #14; Min. 15/32-inch Min. 1.5-inch, One 6-inch o.c. at 4-inch lap and 6-FlintPrime or SBS-AA, Prelim. Flintlastic Base 20; Trufast W-45plywood; 24-inch or more layers, inch o.c. in four(4), equally FlintPrime SBS-SA-HSBS-TA or -127.5 AttachPoly SMS Base; Ultra Plateswith DP or HD; OMG 3 in. spanany combinationspaced, staggered center rowsSA at platesAPP-TA Poly SMS BaseRound Metal Plates with OMG #14HD C ONVENTIONAL S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 11of 74 N EMO|etc. TABLE1E: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPED: INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Insulation Layer(s)(Note 13)Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) TypeAttachTypeFastenersAttachBase PlyCap Ply Glasbase; All Weather/Empire Min. 23/32-inch Min. 1.5-inch, One 12-inch o.c. at 4-inch lap and BP-AA, SBS-SBS-AA, Prelim. Base; Flexiglas Base; plywood; 24-inch or more layers, 36-inch o.c. in two(2), equally AA, SBS-TA SBS-TA or W-46Note2None-30.0* AttachFlintlastic Base 20; spanany combinationspaced, staggered center rowsor APP-TAAPP-TA Yosemite Venting Base Glasbase; All Weather/Empire Min. 23/32-inch Min. 1.5-inch, One 12-inch o.c. at 4-inch lap and BP-AA, SBS-SBS-AA, Prelim. Base; Flexiglas Base; W-47plywood; 24-inch or more layers, Note224-inch o.c. in two(2), equally NoneAA, SBS-TA SBS-TA or -45.0* AttachFlintlastic Base 20; spanany combinationspaced, staggered center rowsor APP-TAAPP-TA Yosemite Venting Base Min. 23/32-inch Min. 1.5-inch, One 12-inch o.c. at 4-inch lap and BP-AA, SBS-SBS-AA, Prelim. Poly SMS Base; Ultra W-48plywood; 24-inch or more layers, Note236-inch o.c. in two(2), equally NoneAA, SBS-TA SBS-TA or -45.0* AttachPoly SMS Base spanany combinationspaced, staggered center rowsor APP-TAAPP-TA Glasbase; Flexiglas; FlintFast3 in. Insulation Plates Flintlastic Base 20; with FlintFast #12 or #14; (Optional) Min. 15/32-inch Min. 1.5-inch, One All Weather / Empire 6-inch o.c. at 4-inch lap and 6-SBS-AA, Prelim. Trufast BP-AA, SBS- plywood; 24-inch or more layers, Base; Poly SMS Base; inch o.c. in three(3), equally SBS-TA or W-49None-97.5 AttachPlateswith DP or HD; OMG 3 in. AA, SBS-TA spanany combinationUltra Poly SMS Base; spaced, staggered center rows. APP-TA Round Metal Plates with OMG or APP-TA Yosemite Venting #14 HD Base Min. 15/32-inch Min. 1.5-inch, One 6-inch o.c. at 4-inch lap and 6- Prelim. OMG 3 in. Round Metal Plates W-50plywood; 24-inch or more layers, Flintlastic APP Base Tinch o.c. in three(3), equally NoneAPP-TAAPP-TA-97.5 Attachwith OMG #14 HD spanany combinationspaced, staggered center rows. Glasbase; Flexiglas; Flintlastic Base 20; One or more FlintFast3 in. Insulation Plates (Optional) Min. 15/32-inch All Weather / Empire 8-inch o.c. at 4-inch lap and 8-SBS-AA, layers,any Prelim. with FlintFast #14; Trufast 3" BP-AA, SBS- W-51plywood; 24-inch Base; Poly SMS Base; inch o.c. atthree (3)equally NoneSBS-TAor -97.5 thickness orMetal Insulation Plates with AA, SBS-TA Attach spanUltra Poly SMS Base; spaced, staggered center rowsAPP_TA combinationTrufastHDor APP-TA Yosemite Venting Base Glasbase; Flexiglas; Flintlastic Base 20; Min. 19/32-inch Min. 1.5-inch, One 7-inch o.c. at 3-inch lap and 7-BP-AA, SBS-SBS-AA, Prelim. Poly SMS Base; Ultra W-52plywood; 24-inch or more layers, Note2inch o.c. in three (3), equally NoneAA, SBS-TA SBS-TA or -105.0 AttachPoly SMS Base; spanany combinationspaced, staggered center rowsor APP-TAAPP-TA Yosemite Venting Base NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 12of 74 N EMO|etc. TABLE1E: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPED: INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Insulation Layer(s)(Note 13)Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) TypeAttachTypeFastenersAttachBase PlyCap Ply Min. 19/32-inch Min. 1.5-inch, One OMG 3 in. Round Metal Plates 7-inch o.c. at 3-inch lap and 7- Prelim. plywood; 24-inch or more layers, with OMG #14 HD or Dekfast inch o.c. in three (3), equally W-53Flintlastic APP Base TNoneAPP-TAAPP-TA-105.0 Attach spanany combinationHex Plate with Dekfast #14spaced, staggered center rows Glasbase; Flexiglas; FlintFast3 in. Insulation Plates Flintlastic Base 20; with FlintFast #12 or #14; (Optional) Min. 15/32-inch Min. 1.5-inch, One 6-inch o.c. at 4-inch lap and 6-SBS-AA, Prelim. Poly SMS Base; Ultra Trufast BP-AA, SBS- W-54plywood; 24-inch or more layers, inch o.c. in four (4), equally NoneSBS-TA or -127.5 AttachPoly SMS Base; Plateswith DP or HD; OMG 3 in. AA, SBS-TA spanany combinationspaced, staggered center rows. APP-TA Yosemite Venting Round Metal Plates with OMG or APP-TA Base#14 HD Min. 15/32-inch Min. 1.5-inch, One 6-inch o.c. at 4-inch lap and 6- Prelim. OMG 3 in. Round Metal Plates plywood; 24-inch or more layers, inch o.c. in four (4), equally W-55Flintlastic APP Base TNoneAPP-TAAPP-TA-127.5 Attachwith OMG #14 HD spanany combinationspaced, staggered center rows. C OLD-A PPLIED S YSTEMS: Glasbase; Flexiglas Base; Flintlastic Base 20; All Weather / FlintFast3 in. Insulation Plates Min. 15/32-inch Min. 1-inch, One 8-inch o.c. at 4-inch lap and 8- Loose-Empire Base; with FlintFast #12 or #14; (Optional) W-56plywood; 24-inch or more layers, inch o.c. in three (3), equally NoneSBS-CA1-52.5 laidYosemite Venting Trufast SBS-CA1 spanany combinationspaced, staggered center rows Base; Flintlastic Poly Plateswith DP or HD SMS Base; Flintlastic Ultra Poly SMS Base TABLE1F-1: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: NON-INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) BaseFastenersAttachBase PlyCap Ply S ELF-A DHERING S YSTEMS: 9-inch o.c. at min. 3-inch lap and 12-inch Min. 15/32-inch FlintPrime (Optional) W-57Flintlastic SA NailBaseSimplex MAXX Capo.c. in two (2), equally spaced, staggered SBS-SA-45.0* plywood; 24-inch spanat platesSBS-SA center rows 6-inch o.c. at min. 2-inch lap and 6-inch Min. 15/32-inch Min. 1-inch long, 12 ga. Simplex Metal (Optional) W-58Flintlastic SA NailBaseo.c. in four (4), equally spaced, NoneSBS-SA-52.5 plywood; 24-inch spanCap NailsSBS-SA staggered center rows Min. 19/32-inch 8-inch o.c. at min. 2-inch lap and 8-inch 32 ga., 1-5/8-inch dia. tin caps with 11 (Optional) W-59plywood; 24-inch Flintlastic SA NailBaseo.c. in three (3), equally spaced, NoneSBS-SA-52.5 ga. annular ring shank nailsSBS-SA spanstaggered center rows NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 13of 74 N EMO|etc. TABLE1F-1: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: NON-INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) BaseFastenersAttachBase PlyCap Ply APA rated, min. 7/16 (Optional) 8-inch o.c. at min. 3-inch lap and 8-inch CAT, 0.418 in., FlintPrime Flintlastic SA W-60Flintlastic SA NailBaseSimplex MAXX Capo.c. in three (3), equally spaced, SBS-SA-52.5 Exposure 1, OSB; 24-at platesMid Ply, self- staggered center rows inch spanadhering 8-inch o.c. at min. 2-inch lap and 8-inch Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 (Optional) W-61Flintlastic SA NailBaseo.c. in three (3), equally spaced, NoneSBS-SA-60.0 plywood; 24-inch spanga. annular ring shank nailsSBS-SA staggered center rows 8-inch o.c. at min. 3-inch lap and 8-inch Min. 15/32-inch FlintPrime (Optional) W-62Flintlastic SA NailBaseSimplex MAXX Capo.c. in three (3), equally spaced, SBS-SA-67.5 plywood; 24-inch spanat platesSBS-SA staggered center rows 6-inch o.c. at min. 2-inch lap and 6-inch Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 (Optional) W-63Flintlastic SA NailBaseo.c. in four (4), equally spaced, NoneSBS-SA-75.0 plywood; 24-inch spanga. annular ring shank nailsSBS-SA staggered center rows Cap nails: 1-inch diameter, 0.032-inch 7-inch o.c. at min. 4-inch lapsand 7-inch Min. 15/32-inch (Optional) W-64Flintlastic SA NailBasethick metal cap with 0.120" shank o.c. in five (5), equally spaced, staggered NoneSBS-SA-75.0 plywood; 24-inch spanSBS-SA diameter, annular ring shank nails center rows 4-inch o.c. at min. 2-inch lap and 4-inch Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 (Optional) W-65Flintlastic SA NailBaseo.c. in four (4), equally spaced, NoneSBS-SA-105.0 plywood; 24-inch spanga. annular ring shank nailsSBS-SA staggered center rows H YBRID S YSTEMS: Glasbase; Flexiglas; Flintlastic Base 9-inch o.c. at 4-inch lap and 12-inch o.c. Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- W-6620; All Weather / Empire Base; Poly in two (2), equally spaced, staggered NoneSBS-SA-H-45.0* plywood; 24-inch spanga. annular ring shank nailsTA or APP-TA SMS Base; Ultra Poly SMS Basecenter rows Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 3-inch lap and 6-inch o.c. in Min. 15/32-inch Min. 1-inch long, 12 ga. Simplex Metal SBS-AA, SBS- W-6720; All Weather / Empire Base; Poly four (4), equally spaced, staggered NoneSBS-SA-H-52.5 plywood; 24-inch spanCap NailsTA or APP-TA SMS Base; Ultra Poly SMS Basecenter rows Glasbase; Flexiglas; Flintlastic Base 8-inch o.c. at 4-inch lap and 8-inch o.c. in Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- W-6820; Poly SMS Base; Ultra Poly SMS three (3), equally spaced, staggered NoneSBS-SA-H-52.5 plywood; 24-inch spanga. annular ring shank nailsTA or APP-TA Basecenter rows Glasbase; Flexiglas; Flintlastic Base 8-inch o.c. at 4-inch lap and 8-inch o.c. in Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- W-6920; Poly SMS Base; Ultra Poly SMS three (3), equally spaced, staggered NoneSBS-SA-H-60.0 plywood; 24-inch spanga. annular ring shank nailsTA or APP-TA Basecenter rows Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 4-inch lap and 6-inch o.c. in Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- W-7020; Poly SMS Base; Ultra Poly SMS four (4), equally spaced, staggered NoneSBS-SA-H-82.5 plywood; 24-inch spanga. annular ring shank nailsTA or APP-TA Basecenter rows Glasbase; Flexiglas; Flintlastic Base 4-inch o.c. at 3-inch lap and 4-inch o.c. in Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- W-7120; Poly SMS Base; Ultra Poly SMS four (4), equally spaced, staggered NoneSBS-SA-H-105.0 plywood; 24-inch spanga. annular ring shank nailsTA or APP-TA Basecenter rows NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 14of 74 N EMO|etc. TABLE1F-1: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: NON-INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) BaseFastenersAttachBase PlyCap Ply C ONVENTIONAL S YSTEMS: Glasbase; Flexiglas; Flintlastic Base 9-inch o.c. at 4-inch lap and 12-inch o.c. BP-AA, SBS- Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- 20; All Weather / Empire Base; Poly W-72in two (2), equally spaced, staggered NoneAA, SBS-TA or -45.0* plywood; 24-inch spanSMS Base; Ultra Poly SMS Base; ga. annular ring shank nailsTA or APP-TA center rowsAPP-TA Yosemite Venting Base (Optional) BP- Glasbase; Flexiglas; Flintlastic Base 9-inch o.c. at 2-inch lap and 18-inch o.c. Min. 15/32-inch AA, SBS-AA, SBS-AA, SBS- W-7320; All Weather / Empire Base; Poly Simplex MAXX Capin two (2), equally spaced, staggered None-45.0* plywood; 24-inch spanSBS-TA or TA or APP-TA SMS Base; Yosemite Venting Basecenter rows APP-TA 9-inch o.c. at 2-inch lap and 18-inch o.c. Min. 15/32-inch (Optional) W-74Flintlastic APP Base TSimplex MAXX Capin two (2), equally spaced, staggered NoneAPP-TA-45.0* plywood; 24-inch spanAPP-TA center rows Glasbase; Flexiglas; Flintlastic Base (Optional) BP- 6-inch o.c. at 3-inch lap and 6-inch o.c. in Min. 15/32-inch 20; All Weather / Empire Base; Poly Min. 1-inch long, 12 ga. Simplex Metal AA, SBS-AA, SBS-AA, SBS- W-75four (4), equally spaced, staggered None-52.5 plywood; 24-inch spanSMS Base; Ultra Poly SMS Base; Cap NailsSBS-TA or TA or APP-TA center rows Yosemite Venting BaseAPP-TA Glasbase; Flexiglas; Flintlastic Base 8-inch o.c. at 4-inch lap and 8-inch o.c. in BP-AA, SBS- Min. 19/32-inch 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- 20; All Weather / Empire Base; Poly W-76three (3), equally spaced, staggered NoneAA, SBS-TA or -52.5 plywood; 24-inch spanSMS Base; Ultra Poly SMS Base; ga. annular ring shank nailsTA or APP-TA center rowsAPP-TA Yosemite Venting Base (Optional) BP- Glasbase; Flexiglas; Flintlastic Base 9-inch o.c. at 2-inch lap and 12-inch o.c. Min. 15/32-inch AA, SBS-AA, SBS-AA, SBS- W-7720; All Weather / Empire Base; Poly Simplex MAXX Capin two (2), equally spaced, staggered None-52.5 plywood; 24-inch spanSBS-TA or TA or APP-TA SMS Base; Yosemite Venting Basecenter rows APP-TA 9-inch o.c. at 2-inch lap and 12-inch o.c. Min. 15/32-inch (Optional) W-78Flintlastic APP Base TSimplex MAXX Capin two (2), equally spaced, staggered NoneAPP-TA-52.5 plywood; 24-inch spanAPP-TA center rows Glasbase; Flexiglas; Flintlastic Base 8-inch o.c. at 4-inch lap and 8-inch o.c. in BP-AA, SBS- Min. 19/32-inch 20; All Weather / Empire Base; Poly 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- W-79three (3), equally spaced, staggered NoneAA, SBS-TA or -60.0 plywood; 24-inch spanSMS Base; Ultra Poly SMS Base; ga. annular ring shank nailsTA or APP-TA center rowsAPP-TA Yosemite Venting Base Glasbase; Flexiglas; Flintlastic Base Cap nails: 1-inch diameter, 0.032-inch 6-inch o.c. at 4-inch lap and 6-inch o.c. (Optional) BP- Min. 15/32-inch SBS-AAor 20; All Weather / Empire Base; Poly W-80thick metal cap with 0.120-inch shank atfive (5)equally spaced, staggered NoneAA, SBS-AAor -67.5 plywood; 24-inch spanSMS Base; Ultra Poly SMS Base; SBS-TA diameter, annular ring shank nails.center rowsSBS-TA Yosemite Venting Base Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 4-inch lap and 6-inch o.c. in BP-AA, SBS- Min. 19/32-inch 20; All Weather / Empire Base; Poly 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- W-81four (4), equally spaced, staggered NoneAA, SBS-TA or -82.5 plywood; 24-inch spanSMS Base; Ultra Poly SMS Base; ga. annular ring shank nailsTA or APP-TA center rowsAPP-TA Yosemite Venting Base NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 15of 74 N EMO|etc. TABLE1F-1: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: NON-INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) BaseFastenersAttachBase PlyCap Ply (Optional) BP- Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 2-inch lap and 6-inch o.c. in Min. 15/32-inch AA, SBS-AA, SBS-AA, SBS- W-8220; All Weather / Empire Base; Poly Simplex MAXX Captwo (2), equally spaced, staggered None-90.0 plywood; 24-inch spanSBS-TA or TA or APP-TA SMS Base; Yosemite Venting Basecenter rows APP-TA 6-inch o.c. at 2-inch lap and 6-inch o.c. in Min. 15/32-inch (Optional) W-83Flintlastic APP Base TSimplex MAXX Captwo (2), equally spaced, staggered NoneAPP-TA-90.0 plywood; 24-inch spanAPP-TA center rows Glasbase; Flexiglas; Flintlastic Base 4-inch o.c. at 3-inch lap and 4-inch o.c. in BP-AA, SBS- Min. 19/32-inch 20; All Weather / Empire Base; Poly 32 ga., 1-5/8-inch dia. tin caps with 11 SBS-AA, SBS- four (4), equally spaced, staggered AA, SBS-TA or W-84None-105.0 plywood; 24-inch spanSMS Base; Ultra Poly SMS Base; ga. annular ring shank nailsTA or APP-TA center rowsAPP-TA Yosemite Venting Base (Optional) BP- Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 2-inch lap and 6-inch o.c. in Min. 15/32-inch AA, SBS-AA, SBS-AA, SBS- W-8520; All Weather / Empire Base; Poly Simplex MAXX Capthree (3), equally spaced, staggered None-105.0 plywood; 24-inch spanSBS-TA or TA or APP-TA SMS Base; Yosemite Venting Basecenter rows APP-TA 6-inch o.c. at 2-inch lap and 6-inch o.c. in Min. 15/32-inch (Optional) three (3), equally spaced, staggered W-86Flintlastic APP Base TSimplex MAXX CapNoneAPP-TA-105.0 plywood; 24-inch spanAPP-TA center rows TABLE1F-2: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEE: NON-INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) BaseFastenersAttachBase PlyCap Ply S ELF-A DHERING S YSTEMS: APA rated, min. (Optional) 9-inch o.c. at min. 3-inch lap and 7/16 CAT, 0.418 in., Trufast Versa Fasteners & Plates; two (2)FlintPrime at Flintlastic SA Flintlastic SA NailBase12-inch o.c. in two (2), equally SBS-SA-60.0* Exposure 1, OSB; screws per plateat 180° from each other*platesMid Ply, self- spaced, staggered center rows W-87 24-inch spanadhering Note:*For re-roof (tear-off) or recover applications, field withdrawal resistance testing (Note 11) shall yield minimum109lbf. Additional Versa-Fast Fasteners within each Versa-Fast Plate may be utilized to produce minimum withdrawal resistance. For recover Min. 19/32-inch 8-inch o.c. at min. 3-inch lap and FlintPrime or (Optional) plywood; 24-inch 8-inch o.c. in two (2), equally FlintPrime SA W-88Flintlastic SA NailBaseNote2SBS-SA-82.5* SBS-SA spanspaced, staggered center rowsat plates FlintFast3 in. Insulation Plates with FlintFast Min. 15/32-inch 6-inch o.c. at min. 2-inch lap and FlintPrimeor #12 or #14; Trufast (Optional) W-89plywood; 24-inch Flintlastic SA NailBase6-inch o.c. in three (3), equally FlintPrime SA SBS-SA-97.5* with DP or HD; OMG 3 in. Round Metal Plates SBS-SA spanspaced, staggered center rowsat plates with OMG #14 HD NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 16of 74 N EMO|etc. TABLE1F-2: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEE: NON-INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) BaseFastenersAttachBase PlyCap Ply FlintFast3 in. Insulation Plates with FlintFast Min. 15/32-inch 6-inch o.c. at min. 2-inch lap and FlintPrime or #12 or #14; Trufast (Optional) W-90plywood; 24-inch Flintlastic SA NailBase6-inch o.c. in four (4), equally FlintPrime SA SBS-SA-127.5* with DP or HD; OMG 3 in. Round Metal Plates SBS-SA spanspaced, staggered center rowsat plates with OMG #14 HD H YBRID S YSTEMS: FlintFast3 in. Insulation Plates with FlintFast Min. 15/32-inch Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 4-inch lap and 6-FlintPrime or #12 or #14; Trufast SBS-AA, SBS- W-91plywood; 24-inch 20; Poly SMS Base; Ultra Poly SMS inch o.c. in three (3), equally FlintPrime SA SBS-SA-H-97.5 with DP or HD; OMG 3 in. Round Metal Plates TA or APP-TA spanBasespaced, staggered center rowsat plates with OMG #14 HD Min. 19/32-inch Glasbase; Flexiglas; Flintlastic Base 7-inch o.c. at 3-inch lap and 7- SBS-AA, SBS- W-92plywood; 24-inch 20; Poly SMS Base; Ultra Poly SMS Note2inch o.c. in three (3), equally NoneSBS-SA-H-105.0 TA or APP-TA spanBasespaced, staggered center rows FlintFast3 in. Insulation Plates with FlintFast Min. 15/32-inch Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 4-inch lap and 6-FlintPrime or #12 or #14; Trufast SBS-AA, SBS- W-93plywood; 24-inch 20; Poly SMS Base; Ultra Poly SMS inch o.c. in four (4), equally FlintPrime SA SBS-SA-H-127.5 with DP or HD; OMG 3 in. Round Metal Plates TA or APP-TA spanBasespaced, staggered center rowsat plates with OMG #14 HD C ONVENTIONAL S YSTEMS: Min. 23/32-inch Glasbase; All Weather/Empire 12-inch o.c. at 4-inch lap and 36-BP-AA, SBS- SBS-AA, SBS- W-94plywood; 24-inch Base; Flexiglas Base; Flintlastic Note2inch o.c. in two (2), equally NoneAA, SBS-TA -30.0* TA or APP-TA spanBase 20; Yosemite Venting Basespaced, staggered center rowsor APP-TA Min. 23/32-inch Glasbase; All Weather/Empire 12-inch o.c. at 4-inch lap and 24-BP-AA, SBS- SBS-AA, SBS- W-95plywood; 24-inch Base; Flexiglas Base; Flintlastic Note2inch o.c. in two (2), equally NoneAA, SBS-TA -45.0* TA or APP-TA spanBase 20; Yosemite Venting Basespaced, staggered center rowsor APP-TA Min. 23/32-inch 12-inch o.c. at 4-inch lap and 36-BP-AA, SBS- Poly SMS Base; Ultra Poly SMS SBS-AA, SBS- W-96plywood; 24-inch Note2inch o.c. in two (2), equally NoneAA, SBS-TA -45.0* BaseTA or APP-TA spanspaced, staggered center rowsor APP-TA FlintFast3 in. Insulation Plates with FlintFast (Optional) Min. 15/32-inch Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 4-inch lap and 6- #12 or #14; Trufast BP-AA, SBS-SBS-AA, SBS- plywood; 24-inch 20; Poly SMS Base; Ultra Poly SMS inch o.c. in three (3), equally W-97None-97.5 with DP or HD; OMG 3 in. Round Metal Plates AA, SBS-TA TA or APP-TA spanBase; Yosemite Venting Basespaced, staggered center rows with OMG #14 HDor APP-TA Min. 15/32-inch 6-inch o.c. at 4-inch lap and 6- OMG 3 in. Round Metal Plates with OMG #14 W-98plywood; 24-inch Flintlastic APP Base Tinch o.c. in three (3), equally NoneAPP-TAAPP-TA-97.5 HD spanspaced, staggered center rows. Glasbase; Flexiglas; Flintlastic Base Min. 15/32-inch FlintFast3 in. Insulation Plates with FlintFast 8-inch o.c. at 4-inch lap and 8-(Optional) 20; All Weather / Empire Base; SBS-AAor W-99plywood; 24-inch #14; Trufast 3" Metal Insulation Plates with inch o.c. atthree (3)equally NoneBP-AA, SBS--97.5 Poly SMS Base; Ultra Poly SMS SBS-TA spanTrufastHDspaced, staggered center rowsAAor SBS-TA Base; Yosemite Venting Base NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 17of 74 N EMO|etc. TABLE1F-2: WOODDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEE: NON-INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP Primer No.(psf) (Note1) BaseFastenersAttachBase PlyCap Ply Min. 19/32-inch Glasbase; Flexiglas; Flintlastic Base 7-inch o.c. at 3-inch lap and 7-BP-AA, SBS- SBS-AA, SBS- plywood; 24-inch 20; Poly SMS Base; Ultra Poly SMS inch o.c. in three (3), equally AA, SBS-TA W-100Note2None-105.0 TA or APP-TA spanBase; Yosemite Venting Basespaced, staggered center rowsor APP-TA Min. 19/32-inch 7-inch o.c. at 3-inch lap and 7- OMG 3 in. Round Metal Plates with OMG #14 W-101plywood; 24-inch Flintlastic APP Base Tinch o.c. in three (3), equally NoneAPP-TAAPP-TA-105.0 HD or Dekfast Hex Plate with Dekfast #14 spanspaced, staggered center rows FlintFast3 in. Insulation Plates with FlintFast (Optional) Min. 15/32-inch Glasbase; Flexiglas; Flintlastic Base 6-inch o.c. at 4-inch lap and 6- #12 or #14; Trufast BP-AA, SBS-SBS-AA, SBS- W-102plywood; 24-inch 20; Poly SMS Base; Ultra Poly SMS inch o.c. in four (4), equally None-127.5 with DP or HD; OMG 3 in. Round Metal Plates AA, SBS-TA TA or APP-TA spanBase; Yosemite Venting Basespaced, staggered center rows with OMG #14 HDor APP-TA Min. 15/32-inch 6-inch o.c. at 4-inch lap and 6- OMG 3 in. Round Metal Plates with OMG #14 W-103plywood; 24-inch Flintlastic APP Base Tinch o.c. in four (4), equally NoneAPP-TAAPP-TA-127.5 HD spanspaced, staggered center rows. C OLD-A PPLIED S YSTEMS: Glasbase; Flexiglas Base; Flintlastic Min. 15/32-inch Base 20; All Weather / Empire FlintFast3 in. Insulation Plates with FlintFast 8-inch o.c. at 4-inch lap and 8- (Optional) W-104plywood; 24-inch Base; Yosemite Venting Base; #12 or #14; Trufast inch o.c. in three (3), equally NoneSBS-CA1-52.5 SBS-CA1 spanFlintlastic Poly SMS Base; Flintlastic with DP or HDspaced, staggered center rows Ultra Poly SMS Base TABLE1G: WOODDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEF:NON-INSULATED,BONDEDROOFCOVER Roof Cover (Note 15) Deck System PrimerMDP (psf) No. (Note1) Base PlyPlyCap Ply APA rated, min. 7/16 CAT, 0.418 in., Exposure 1, OSB Flintlastic SA Mid Ply, W-105FlintPrime or FlintPrime SA(Optional) SBS-SASBS-SA-90.0 sheathing; 24-inch spanself-adhering W-106Min. 15/32-inch plywood; 24-inch spanFlintPrime or FlintPrime SASBS-SA-H(Optional) SBS-TA, APP-TASBS-TA, APP-TA-112.5 WW--107107Min. Min. 15/3215/32--inch plywoodinch plywood; 24; 24--inch spaninch spanFlintPrime or FlintPrime SAFlintPrime or FlintPrime SASBSSBS--SASA(Optional) SBS(Optional) SBS--SASASBSSBS--SASA--1 27.5127.5 NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 18of 74 N EMO|etc. TABLE2A: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEB: MECHANICALLYATTACHEDBASEINSULATION,BONDEDTOPINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Deck System MDP Attach No.(psf) (Note1) TypeFastenersAttachTypeBase PlyPlyCap Ply (Notes 6,7,8) S ELF-A DHERING S YSTEMS: HA, D-IS, M- Min. 22 ga., type B, Grade Min. 2-inch ACFoam II, OSFA, 1 per 4.0 Min. 0.25-inch SECUROCK S-133 steel or min. 2,500 psi FlintBoard, ENRGY 3 or Note2OB500, ICP SBS-SA(Optional) SBS-SASBS-SA-37.5* 2 ftGypsum-Fiber Roof Board structrual concreteH-ShieldBOARD-MAX or CR-20 HA, D-IS, M- Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam OSFA, 1 per 2.0 Min. 0.25-inch SECUROCK S-233 steel or min. 2,500 psi II, FlintBoard, ENRGY 3 Note2OB500, ICP SBS-SA(Optional) SBS-SASBS-SA-45.0* 2 ftGypsum-Fiber Roof Board structrual concreteor H-ShieldBOARD-MAX or CR-20 H YBRID S YSTEMS: HA, D-IS, M- Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam OSFA, Flintlastic SBS-AA, 1 per 1.5 Additional layer(s) base (Optional) SBS-AA, S-333 steel or min. 2,500 psi II, FlintBoard, ENRGY 3 Note2OB500, ICP Ultra SBS-TA, -37.5 2 ftinsulationSBS-TA, APP-TA structrual concreteor H-ShieldBOARD-MAX Glass SAAPP-TA or CR-20 HA, D-IS, M- Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam OSFA, Flintlastic SBS-AA, 1 per 1.5 Min. 0.25-inch SECUROCK (Optional) SBS-AA, S-433 steel or min. 2,500 psi II, FlintBoard, ENRGY 3 Note2OB500, ICP Ultra SBS-TA, -52.5 2 ftGypsum-Fiber Roof BoardSBS-TA, APP-TA structrual concreteor H-ShieldBOARD-MAX Glass SAAPP-TA or CR-20 Min. 1.5-inch ACFoam HA, D-IS, M- Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam II, II, FlintBoard ISO, H-FlintFast #12 or #14 with 1 per 1.5 OSFA, M- S-533 steel or min. 2,500 psi FlintBoard ISO, H-Shield or SBS-SA-H(Optional) APP-TAAPP-TA-67.5 2 Shield or FlintBoard ftPG1 or structrual concreteFlintBoard ISO. H ISO.OB500 H FlintFast #12 (steel only) or #14 Min. 1.5-inch ACFoam D-IS, M- Min. 22 ga., type B, Grade II, FlintBoard ISO, H-1 per 1.6Min. 0.25-inch SECUROCK OSFA, M-(Optional) SBS-TA SBS-TA or Plates or Trufast #12 (steel only) S-640steel or min. 2,500 psi SBS-SA-H-75.0 2 Shield or FlintBoard ftGypsum-Fiber Roof BoardPG1 or or APP-TAAPP-TA or HD structrual concrete ISOOB500 H Insulation Plates FlintFast #12 (steel only) or #14 Min. 22 ga., type B, Grade 1 per 1.0 Min. 0.5-inch SECUROCK OB500, 4-(Optional) SBS-TA SBS-TA or Plates or Trufast #12 (steel only) 33 steel or min. 2,500 psi S-7Min. 1.5-inch ENRGY 3SBS-SA-H-90.0* 2 ftGypsum-Fiber Roof Boardinch o.c.or APP-TAAPP-TA structrual concrete Insulation Plates C ONVENTIONAL S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 19of 74 N EMO|etc. TABLE2A: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEB: MECHANICALLYATTACHEDBASEINSULATION,BONDEDTOPINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Deck System MDP Attach No.(psf) (Note1) TypeFastenersAttachTypeBase PlyPlyCap Ply (Notes 6,7,8) HA, D-IS, M- BP-AA, Min. 22 ga., type B, Grade Min. 2-inch ACFoam II, OSFA, (Optional) BP-AA, SBS-AA, 1 per 4.0 Min. 0.25-inch SECUROCK SBS-AA, S-833 steel or min. 2,500 psi FlintBoard, ENRGY 3 or Note2OB500, ICP SBS-AA, SBS-TA or SBS-TA or -37.5* 2 ftGypsum-Fiber Roof BoardSBS-TA or structrual concreteH-ShieldBOARD-MAX APP-TAAPP-TA APP-TA or CR-20 Min. 0.5-inch Structodek Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam High Density Fiberboard (Optional) BP-AA, SBS-AA, 1 per 2.0 BP-AA or S-933 steel or min. 2,500 psi II, FlintBoard, ENRGY 3 Note2Roof Insulation, min. 0.75-HASBS-AA, SBS-TA or SBS-TA or -45.0* 2 ftSBS-AA inch FescoBoard structrual concreteor H-ShieldAPP-TAAPP-TA (homogeneous). BP-AA, Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam (Optional) BP-AA, SBS-AA, 1 per 2.0 Min. 0.25-inch DensDeckSBS-AA, S-1033 steel or min. 2,500 psi II, FlintBoard, ENRGY 3 Note2HASBS-AA, SBS-TA or SBS-TA or -45.0* 2 ftor DensDeckPrimeSBS-TA or structrual concreteor H-ShieldAPP-TAAPP-TA APP-TA HA, D-IS, M- BP-AA, Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam OSFA, (Optional) BP-AA, SBS-AA, 1 per 2.0 Min. 0.25-inch SECUROCK SBS-AA, S-1133 steel or min. 2,500 psi II, FlintBoard, ENRGY 3 Note2OB500, ICP SBS-AA, SBS-TA or SBS-TA or -45.0* 2 ftGypsum-Fiber Roof BoardSBS-TA or BOARD-MAX structrual concreteor H-ShieldAPP-TAAPP-TA APP-TA or CR-20 Min. 0.5-inch Structodek Min. 22 ga., type B, Grade Min. 2-inch ACFoam II, High Density Fiberboard (Optional) BP-AA, SBS-AA, 1 per 3.2 BP-AA or S-1233 steel or min. 2,500 psi FlintBoard, ENRGY 3 or Note2Roof Insulation, min. 0.75-HASBS-AA, SBS-TA or SBS-TA or -45.0* 2 ftSBS-AA structrual concreteH-Shieldinch FescoBoard APP-TAAPP-TA (homogeneous). BP-AA, Min. 22 ga., type B, Grade Min. 2-inch ACFoam II, (Optional) BP-AA, SBS-AA, 1 per 3.2 Min. 0.25-inch DensDeckSBS-AA, S-1333 steel or min. 2,500 psi FlintBoard, ENRGY 3 or Note2HASBS-AA, SBS-TA or SBS-TA or -45.0* 2 ftor DensDeckPrimeSBS-TA or structrual concreteH-ShieldAPP-TAAPP-TA APP-TA Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam (Optional) BP-AA, SBS-AA, 1 per 1.3 Min. 0.75-inch FescoBoard BP-AA or S-1433 steel or min. 2,500 psi II, FlintBoard, ENRGY 3 Note2HASBS-AA, SBS-TA or SBS-TA or -52.5 2 ft(homogeneous)SBS-AA structrual concreteor Multi-MaxFA3APP-TAAPP-TA HA, D-IS, M- BP-AA, Min. 22 ga., type B, Grade Min. 2-inch ACFoam II, (Optional) BP-AA, SBS-AA, OSFA, 1 per 1.6 Min. 0.25-inch SECUROCK SBS-AA, S-1533 steel or min. 2,500 psi FlintBoard, ENRGY 3 or Note2OB500, ICP SBS-AA, SBS-TA or SBS-TA or -60.0 2 ftGypsum-Fiber Roof BoardSBS-TA or structrual concreteH-ShieldBOARD-MAX APP-TAAPP-TA APP-TA or CR-20 NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 20of 74 N EMO|etc. TABLE2A: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEB: MECHANICALLYATTACHEDBASEINSULATION,BONDEDTOPINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Deck System MDP Attach No.(psf) (Note1) TypeFastenersAttachTypeBase PlyPlyCap Ply (Notes 6,7,8) Min. 22 ga., type B, Grade Min. 1.5-inch ACFoam (Optional) BP-AA, SBS-AA, 1 per 1.3 Min. 0.5-inch Structodek BP-AA or S-1633 steel or min. 2,500 psi II, FlintBoard, ENRGY 3 Note2HASBS-AA, SBS-TA or SBS-TA or -67.5 2 ftHigh Density FiberboardSBS-AA structrual concreteor Multi-MaxFA3APP-TAAPP-TA FlintFast #12 (steel only) or #14 Min. 1.5-inch ACFoam D-IS, M-BP-AA, Min. 22 ga., type B, Grade (Optional) BP-AA, SBS-AA, II, FlintBoard ISO, H-1 per 1.6Min. 0.25-inch SECUROCK OSFA, M-SBS-AA, Plates or Trufast #12 (steel only) S-1740steel or min. 2,500 psi SBS-AA, SBS-TA or SBS-TA or -75.0 2 Shield or FlintBoard ftGypsum-Fiber Roof BoardPG1 or SBS-TA or structrual concreteAPP-TAAPP-TA ISOOB500APP-TA H Insulation Plates FlintFast #12 (steel only) or #14 BP-AA, Min. 22 ga., type B, Grade (Optional) BP-AA, SBS-AA, 1 per 1.0 Min. 0.5-inch SECUROCK OB500, 4-SBS-AA, Plates or Trufast #12 (steel only) S-1833 steel or min. 2,500 psi Min. 1.5-inch ENRGY 3SBS-AA, SBS-TA or SBS-TA or -90.0* 2 ftGypsum-Fiber Roof Boardinch o.c.SBS-TA or structrual concreteAPP-TAAPP-TA APP-TA Insulation Plates C OLD-A PPLIED S YSTEMS: FlintFast #12 (steel only) or #14 Min. 2-inch ACFoam II, Min. 1.5-inch ACFoam III, Min. 22 ga., type B, Grade OB500, ICP FlintBoard ISO, H-1 per 2.0 FlintBoard Iso Cold, H- Plates or Trufast #12 (steel only) S-1933 steel or min. 2,500 psi BOARD-MAX SBS-CA1NoneSBS-CA1-45.0* 2 Shield or FlintBoard ftShield CG or FlintBoard Iso structrual concreteor CR-20 ISOCold HH Insulation Plates D-IS, M- Optional min. 1.5-inch FlintFast #12 (steel only) or #14 Min. 2-inch ACFoam II, OSFA, M- Min. 22 ga., type B, Grade additional layer(s) base FlintBoard ISO, H-1 per 2.0 PG1, OB500, Plates or Trufast #12 (steel only) S-2033 steel or min. 2,500 psi insulation, followed by SBS-CA1NoneSBS-CA1-45.0* 2 Shield or FlintBoard ICP BOARD- ft structrual concretemin. 0.25-inch SECUROCK ISOMAX or CR- H Insulation Plates Gypsum-Fiber Roof Board 20 FlintFast #12 (steel only) or #14 Min. 1.5-inch ACFoam D-IS, M- Min. 22 ga., type B, Grade II, FlintBoard ISO, H-1 per 1.6Min. 0.25-inch SECUROCK OSFA, M- Plates or Trufast #12 (steel only) S-2140steel or min. 2,500 psi SBS-CA1NoneSBS-CA1-75.0 2 Shield or FlintBoard ftGypsum-Fiber Roof BoardPG1 or structrual concrete ISOOB500 H Insulation Plates FlintFast #12 (steel only) or #14 Min. 22 ga., type B, Grade 1 per 1.0 Min. 0.5-inch SECUROCK OB500, 4- Plates or Trufast #12 (steel only) S-2233 steel or min. 2,500 psi Min. 1.5-inch ENRGY 3SBS-CA1NoneSBS-CA1-90.0* 2 ftGypsum-Fiber Roof Boardinch o.c. structrual concrete Insulation Plates NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 21of 74 N EMO|etc. TABLE2B: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System MDP Base Insulation Layer(s)Primer No.(psf) (Note1) TypeFastenersAttachBase PlyPlyCap Ply S ELF-A DHERING S YSTEMS: Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch 1 per S-2333 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Note2NoneSBS-SA(Optional) SBS-SASBS-SA-30.0* 2 3.2 ft structrual concreteloose laidFiber Roof Board FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch 1 per S-2433 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneSBS-SA(Optional) SBS-SASBS-SA-37.5* 2 2.7 ft structrual concreteloose laidFiber Roof Board(steel only) or HD with Trufast Min. 22 ga., type B, Grade (Optional) One or more Min. 3/8-inch 1 per S-2533 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Note2NoneSBS-SA(Optional) SBS-SASBS-SA-45.0* 2 2.7 ft structrual concreteloose laidFiber Roof Board FlintPrime Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch 1 per or S-2633 steel or min. 2,500 psi layers, any combination, Note2SBS-SA(Optional) SBS-SASBS-SA-45.0 2 DensDeck1.3 ftFlintPrime structrual concreteloose laid SA FlintFast #14 HD with FlintFast Min. 22 ga., type B, Grade (Optional) One or more Min. 1.5-inch 1 per Trufast S-2740steel or min. 2,500 psi layers, any combination, FlintPrimeSBS-SA(Optional) SBS-SASBS-SA-67.5 2 FlintBoard ISO1.8 ft structrual concreteloose laid Insulation Plates FlintFast #14 HD with FlintFast Min. 22 ga., type B, Grade (Optional) One or more Min. 0.5-inch 1 per S-2840steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-FlintPrimeSBS-SA(Optional) SBS-SASBS-SA-82.5 2 1.6ft structrual concreteloose laidFiber Roof Board Insulation Plates FlintFast #15EHD(steel only) or FlintFast #14 HD (concrete Min. 1.5-inch Min. 22 ga., type B, Grade (Optional) One or more only) FlintBoard ISO, 1 per S-2940steel or min. 2,500 psi layers, any combination, Insulation Platesor Trufast FlintPrimeSBS-SA(Optional) SBS-SASBS-SA-97.5 2 FlintBoardH ISO, 1.0 ft structrual concreteloose laidEHD(steel only) or Trufast HD ACFoam II or H-Shield (concrete only) Metal Insulation Plates H YBRID S YSTEMS: Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch (Optional) BP-AA, SBS-AA, 1 per S-3033 steel or min. 2,500 psi layers, any combination, DensDeck; DensDeckNote2NoneSBS-SA-HSBS-AA, SBS-TA or SBS-TA or -30.0* 2 2.0 ft structrual concreteloose laidPrimeAPP-TAAPP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 22of 74 N EMO|etc. TABLE2B: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System MDP Base Insulation Layer(s)Primer No.(psf) (Note1) TypeFastenersAttachBase PlyPlyCap Ply FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch (Optional) BP-AA, SBS-AA, 1 per S-3133 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneSBS-SA-HSBS-AA, SBS-TA or SBS-TA or -37.5* 2 2.7 ft structrual concreteloose laidFiber Roof Board(steel only) or HD with Trufast APP-TAAPP-TA FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 3/8-inch (Optional) BP-AA, SBS-AA, 1 per S-3233 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneSBS-SA-HSBS-AA, SBS-TA or SBS-TA or -45.0* 2 2.7 ft structrual concreteloose laidFiber Roof Board(steel only) or HD with Trufast APP-TAAPP-TA FlintFast #14 HD with FlintFast Min. 22 ga., type B, Grade (Optional) One or more Min. 1.5-inch 1 per (Optional) SBS-TA SBS-TA or S-3340steel or min. 2,500 psi layers, any combination, NoneSBS-SA-H-67.5 2 FlintBoard ISO1.8 ftor APP-TAAPP-TA structrual concreteloose laid Insulation Plates Min. 1.5-inch ACFoam Min. 22 ga., type B, Grade (Optional) One or more FlintFast #12 (steel only) or SBS-AA, II, FlintBoard ISO, H-1 per (Optional) SBS-AA, S-3433 steel or min. 2,500 psi layers, any combination, NoneSBS-SA-HSBS-TA or -75.0 2 Shield or FlintBoard 1.5 ftSBS-TA or APP-TA structrual concreteloose laidInsulation Plates APP-TA ISO. H FlintFast #14 HD with FlintFast Min. 22 ga., type B, Grade (Optional) One or more Min. 0.5-inch 1 per (Optional) SBS-TA SBS-TA or S-3540steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-NoneSBS-SA-H-82.5 2 1.6ftor APP-TAAPP-TA structrual concreteloose laidFiber Roof Board Insulation Plates FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 0.5-inch 1 per (Optional) SBS-TA SBS-TA or 33 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 S-36NoneSBS-SA-H-82.5 2 1.5 ftor APP-TAAPP-TA structrual concreteloose laid Fiber Roof Board(steel only) or HD with Trufast Min. 1.5-inch ACFoam Min. 22 ga., type B, Grade (Optional) One or more SBS-AA, 1 per (Optional) SBS-AA, II, FlintBoard ISO, S-3733 steel or min. 2,500 psi layers, any combination, Note2NoneSBS-SA-HSBS-TA or -82.5 2 ENRGY 3 or Multi-Max 1.3 ftSBS-TA or APP-TA structrual concreteloose laidAPP-TA FA3 FlintFast #15EHD(steel only) or FlintFast #14 HD (concrete Min. 1.5-inch Min. 22 ga., type B, Grade (Optional) One or more only)SBS-AA, FlintBoard ISO, 1 per (Optional) SBS-AA, S-3840steel or min. 2,500 psi layers, any combination, Insulation Platesor Trufast NoneSBS-SA-HSBS-TA or -97.5 2 FlintBoardH ISO, 1.0 ftSBS-TA or APP-TA structrual concreteloose laidEHD(steel only) or Trufast HD APP-TA ACFoam II or H-Shield (concrete only) Metal Insulation Plates NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 23of 74 N EMO|etc. TABLE2B: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System MDP Base Insulation Layer(s)Primer No.(psf) (Note1) TypeFastenersAttachBase PlyPlyCap Ply FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 0.5-inch #14 HD with 1 per (Optional) SBS-TA SBS-TA or S-3933 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneSBS-SA-H-135.0 2 1.0 ftor APP-TAAPP-TA structrual concreteloose laid Fiber Roof Board(steel only) or HD with Trufast C ONVENTIONAL S YSTEMS: Min. 22 ga., type B, Grade (Optional) One or more Min. 0.75-inch (Optional) BP-AA, SBS-AA, 1 per BP-AA, SBS- 33 steel or min. 2,500 psi layers, any combination, FescoBoard SBS-AA, SBS-TA or SBS-TA or S-40Note2None-30.0* 2 2.7 ftAA structrual concreteloose laid(homogeneous)APP-TAAPP-TA Min. 0.5-inch Min. 22 ga., type B, Grade (Optional) One or more (Optional) BP-AA, SBS-AA, Structodek High 1 per BP-AA, SBS- S-4133 steel or min. 2,500 psi layers, any combination, Note2NoneSBS-AA, SBS-TA or SBS-TA or -37.5* 2 Density Fiberboard 4.0 ftAA structrual concreteloose laidAPP-TAAPP-TA Roof Insulation Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch (Optional) BP-AA, SBS-AA, 1 per BP-AA, SBS- S-4233 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Note2NoneSBS-AA, SBS-TA or SBS-TA or -37.5* 2 4.0 ftAA structrual concreteloose laidFiber Roof BoardAPP-TAAPP-TA Min. 22 ga., type B, Grade (Optional) One or more (Optional) BP-AA, SBS-AA, Min. 2-inch ACFoam II, 1 per S-4333 steel or min. 2,500 psi layers, any combination, Note2NoneBP-AA2SBS-AA, SBS-TA or SBS-TA or -37.5* 2 FlintBoard or ENRGY 31.6 ft structrual concreteloose laidAPP-TAAPP-TA Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch BP-AA, SBS-(Optional) BP-AA, SBS-AA, 1 per S-4433 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Note2NoneAA, SBS-TA SBS-AA, SBS-TA or SBS-TA or -45.0* 2 4.0 ft structrual concreteloose laidFiber Roof Boardor APP-TAAPP-TAAPP-TA Min. 0.5-inch Structodek High Min. 22 ga., type B, Grade (Optional) One or more (Optional) BP-AA, SBS-AA, Density Fiberboard 1 per BP-AA or S-4533 steel or min. 2,500 psi layers, any combination, Note2NoneSBS-AA, SBS-TA or SBS-TA or -45.0* 2 Roof Insulation, min. 2.0 ftSBS-AA structrual concreteloose laidAPP-TAAPP-TA 0.75-inch FescoBoard (homogeneous) Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch BP-AA, SBS-(Optional) BP-AA, SBS-AA, 1 per S-4633 steel or min. 2,500 psi layers, any combination, DensDeckor Note2NoneAA, SBS-TA SBS-AA, SBS-TA or SBS-TA or -45.0* 2 2.0 ft structrual concreteloose laidDensDeckPrimeor APP-TAAPP-TAAPP-TA Min. 1-inch FescoBoard Min. 22 ga., type B, Grade (Optional) One or more (Optional) BP-AA, SBS-AA, (homogeneous) or 1 per S-4733 steel or min. 2,500 psi layers, any combination, Note2NoneBP-AA2SBS-AA, SBS-TA or SBS-TA or -45.0* 2 min. 1.5-inch 1.6 ft structrual concreteloose laidAPP-TAAPP-TA FescoBoard (laminated) NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 24of 74 N EMO|etc. TABLE2B: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System MDP Base Insulation Layer(s)Primer No.(psf) (Note1) TypeFastenersAttachBase PlyPlyCap Ply Min. 0.5-inch Min. 22 ga., type B, Grade (Optional) One or more Structodek, (Optional) BP-AA, SBS-AA, 1 per S-4833 steel or min. 2,500 psi layers, any combination, Structodek HD, GP HD Note2NoneBP-AA2SBS-AA, SBS-TA or SBS-TA or -45.0* 2 2.0 ft structrual concreteloose laidRoof Fiberboard or APP-TAAPP-TA Temple HD1 or HD6 Min. 22 ga., type B, Grade (Optional) One or more Min. 1.5-inch ACFoam 1 per BP-AA3, 24-(Optional) BP-AA S-4933 steel or min. 2,500 psi layers, any combination, Note2NoneSBS-AA-52.5 2 II, FlintBoard1.5 ftinch gridor SBS-AA structrual concreteloose laid Min. 22 ga., type B, Grade (Optional) One or more Min. 1.5-inch ACFoam 1 per BP-AA3, 24- S-5033 steel or min. 2,500 psi layers, any combination, Note2NoneBP-AA or SBS-AASBS-TA-52.5 2 II, FlintBoard1.5 ftinch grid structrual concreteloose laid (Optional for Concrete or Min. 22 ga., type B, Grade Min. 0.25-inch FlintFast #12 (steel only) or Recover) Min. 1.5-inch, 1 per S-5133 steel or min. 2,500 psi SECUROCK Gypsum-NoneAPP-TA(Optional) APP-TAAPP-TA-60.0 2 One or more layers, any 1.5 ft structrual concreteFiber Roof BoardInsulation Plates combination, loose laid (Optional for Concrete or Min. 22 ga., type B, Grade Recover) Min. 2-inch Min. 0.5-inch BP-AA, SBS-(Optional) BP-AA, SBS-AA, 1 per S-5233 steel or min. 2,500 psi ACFoam II, FlintBoard, H-SECUROCK Gypsum-Note2NoneAA, SBS-TA SBS-AA, SBS-TA or SBS-TA or -60.0 2 1.8 ft structrual concreteShield or ENRGY 3, loose Fiber Roof Boardor APP-TAAPP-TAAPP-TA laid. FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 0.5-inch BP-AA, SBS-(Optional) BP-AA, SBS-AA, 1 per S-5333 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneAA, SBS-TA SBS-AA, SBS-TA or SBS-TA or -82.5 2 1.5 ft structrual concreteloose laid Fiber Roof Board(steel only) or HD with Trufast or APP-TAAPP-TAAPP-TA (Optional for Concrete or Min. 22 ga., type B, Grade Recover) Min. 1.5-inch Min. 0.5-inch Metal Insulation Plates or 1 per BP-AA, SBS-(Optional) BP-AA, S-5433 steel or min. 2,500 psi NoneSBS-AA-112.5 2 ACFoam II, FlintBoard, H-DensDeckPrime1.3 ftAASBS-AA structrual concrete ShieldInsulation Plates FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 0.5-inch BP-AA, SBS-(Optional) BP-AA, SBS-AA, 1 per S-5533 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneAA, SBS-TA SBS-AA, SBS-TA or SBS-TA or -135.0 2 1.0 ft structrual concreteloose laid Fiber Roof Board(steel only) or HD with Trufast or APP-TAAPP-TAAPP-TA (Optional for Concrete or Min. 22 ga., type B, Grade Min. 0.5-inch Recover) Min. 1.5-inch Metal Insulation Plates or 1 per BP-AA, SBS-(Optional) BP-AA, S-5633 steel or min. 2,500 psi SECUROCK Gypsum-NoneSBS-AA-157.5 2 ACFoam II, FlintBoard, H-1.3 ftAASBS-AA structrual concreteFiber Roof Board ShieldInsulation Plates NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 25of 74 N EMO|etc. TABLE2B: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System MDP Base Insulation Layer(s)Primer No.(psf) (Note1) TypeFastenersAttachBase PlyPlyCap Ply (Optional for Concrete or Min. 22 ga., type B, Grade Recover) Min. 1.5-inch Min. 0.5-inch Metal Insulation Plates or 1 per BP-AA, SBS-(Optional) BP-AA, S-5733 steel or min. 2,500 psi NoneSBS-AA-157.5 2 ACFoam II, FlintBoard, H-DensDeckPrime1.0 ftAASBS-AA structrual concrete ShieldInsulation Plates (Optional for Concrete or Min. 22 ga., type B, Grade Min. 0.5-inch 1 per BP-AA, SBS-(Optional) BP-AA, Recover) Min. 1.5-inch Metal Insulation Plates or S-5833 steel or min. 2,500 psi SECUROCK Gypsum-NoneSBS-AA-172.5 2 ACFoam II, FlintBoard, H-1.0 ftAASBS-AA structrual concreteFiber Roof Board ShieldInsulation Plates C OLD-A PPLIED S YSTEMS: FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 0.25-inch 1 per S-5933 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneSBS-CA1NoneSBS-CA1-37.5* 2 2.7 ft structrual concreteloose laidFiber Roof Board(steel only) or HD with Trufast FlintFast #12 (steel only) or Min. 1.5-inch ACFoam Min. 22 ga., type B, Grade (Optional) One or more #14 HD with III, FlintBoard Iso Cold, 1 per 33 steel or min. 2,500 psi layers, any combination, Insulation Plates or Trufast #12 S-60NoneSBS-CA1NoneSBS-CA1-45.0* 2 H-Shield CG or 2.0 ft structrual concreteloose laid(steel only) or HD with Trufast FlintBoard Iso Cold H FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 3/8-inch 1 per S-6133 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneSBS-CA1NoneSBS-CA1-45.0* 2 2.7ft structrual concreteloose laid Fiber Roof Board(steel only) or HD with Trufast FlintFast #12 (steel only) or Min. 22 ga., type B, Grade (Optional) One or more Min. 0.5-inch 1 per S-6233 steel or min. 2,500 psi layers, any combination, SECUROCK Gypsum-Insulation Plates or Trufast #12 NoneSBS-CA1NoneSBS-CA1-82.5* 2 1.5 ft structrual concreteloose laid Fiber Roof Board(steel only) or HD with Trufast NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 26of 74 N EMO|etc. TABLE2C: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPED: INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Insulation Layer(s)(Note 13)Base SheetRoof Cover (Note 15) Deck System MDP No.(psf) (Note1) TypeAttachTypeFastenersAttachBase PlyCap Ply S ELF-A DHERING S YSTEMS: Min. 22 ga., type B, Grade Min. 1.5-inch, One 9-incho.c. at min. 2-inch lap and Prelim. (Optional) SBS- S-6333 steel or min. 2,500 psi or more layers, any Flintlastic SA NailBaseNote218-incho.c. in two (2), equally SBS-SA-45.0* AttachedSA structrual concretecombinationspaced, staggered center rows Min. 22 ga., type B, Grade Min. 1.5-inch, One 12-inch o.c. at min. 2-inch lap and Prelim. (Optional) SBS- S-6433 steel or min. 2,500 psi or more layers, any Flintlastic SA NailBaseNote212-inch o.c. in two (2), equally SBS-SA-52.5* AttachedSA structrual concretecombinationspaced, staggered center rows Min. 22 ga., type B, Grade Min. 1.5-inch, One 12-inch o.c. at min. 4-inch lap and Prelim. (Optional) SBS- S-6533 steel or min. 2,500 psi or more layers, any Flintlastic SA NailBaseNote212-inch o.c. in two (2), equally SBS-SA-60.0* AttachedSA structrual concretecombinationspaced, staggered center rows 8-inch o.c. at min. 4-inch lap and 8- Min. 22 ga., type B, Grade Min. 1.5-inch, One Flintlastic SA NailBase Prelim. inch o.c. in two (2), equally spaced, (Optional) SBS- S-6633 steel or min. 2,500 psi or more layers, any (laid parallel to deck Note2SBS-SA-82.5* Attachedstaggered center rows; FlintPrime SA structrual concretecombinationflutes) or FlintPrime SA at plates C ONVENTIONAL S YSTEMS: Glasbase; All Min. 22 ga., type B, Grade Min. 1.5-inch, One Weather/Empire Base; 12-inch o.c. at 4-inch lap and 36-BP-AA, SBS-AA, Prelim. SBS-AA, SBS- S-6733 steel or min. 2,500 psi or more layers, any Flexiglas Base; Flintlastic Note2inch o.c. in two (2), equally spaced, SBS-TA or APP--30.0* AttachedTA or APP-TA structrual concretecombinationBase 20; Yosemite staggered center rowsTA Venting Base Glasbase; All Min. 22 ga., type B, Grade Min. 1.5-inch, One Weather/Empire Base; 12-inch o.c. at 4-inch lap and 24-BP-AA, SBS-AA, Prelim. SBS-AA, SBS- S-6833 steel or min. 2,500 psi or more layers, any Flexiglas Base; Flintlastic Note2inch o.c. in two (2), equally spaced, SBS-TA or APP--45.0* AttachedTA or APP-TA structrual concretecombinationBase 20; Yosemite staggered center rowsTA Venting Base Min. 22 ga., type B, Grade Min. 1.5-inch, One 12-inch o.c. at 4-inch lap and 36-BP-AA, SBS-AA, Prelim. Poly SMS Base; Ultra Poly SBS-AA, SBS- S-6933 steel or min. 2,500 psi or more layers, any Note2inch o.c. in two (2), equally spaced, SBS-TA or APP--45.0* AttachedSMS BaseTA or APP-TA structrual concretecombinationstaggered center rowsTA Min. 22 ga., type B, Grade Min. 1.5-inch, One 18-inch o.c. at 4-inch lap and 18-BP-AA, SBS-AA, Prelim. Poly SMS Base; Ultra Poly SBS-AA, SBS- 33 steel or min. 2,500 psi or more layers, any inch o.c. in one (1)staggered SBS-TA or APP- S-70Note2-45.0* AttachedSMS BaseTA or APP-TA structrual concretecombinationcenter rowTA Min. 22 ga., type B, Grade Min. 1.5-inch, One Prelim. Poly SMS Base; Ultra Poly Dekfast IF-2-SB plates with 12-inch o.c. within the min. 4-inch SBS-AA, SBS-TA SBS-AA, SBS- S-7133 steel or min. 2,500 psi or more layers, any -45.0* AttachedSMS Base#14 Dekfastwide, heat-welded side lapor APP-TATA or APP-TA structrual concretecombination Glasbase; Flexiglas Base; Min. 22 ga., type B, Grade Min. 1.5-inch, One Flintlastic Base 20; All 12-inch o.c. at 3-inch lap and 12-BP-AA, SBS-AA, Prelim. SBS-AA, SBS- S-7233 steel or min. 2,500 psi or more layers, any Weather / Empire Base; Note2inch o.c. in two (2), equally spaced, SBS-TA or APP--52.5 AttachedTA or APP-TA structrual concretecombinationPoly SMS Base; Yosemite staggered center rowsTA Venting Base NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 27of 74 N EMO|etc. TABLE2C: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPED: INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Insulation Layer(s)(Note 13)Base SheetRoof Cover (Note 15) Deck System MDP No.(psf) (Note1) TypeAttachTypeFastenersAttachBase PlyCap Ply Min. 22 ga., type B, 40 ksi Min. 2-inch, One or Seam Plates with Trufast Prelim. 12-inch o.c. within the min. 4-inch (Optional) SBS-SBS-TA or S-73steel or min. 2,500 psi more layers, any Ultra Poly SMS Base#15 EHD (steel only)or -52.5 Attachedwide, heat-welded side lapTA or APP-TAAPP-TA structrual concretecombinationTrufast #14 HD (concrete only) Min. 22 ga., type B, Grade Min. 1.5-inch, One Seam Plates with Trufast Prelim. 12-inch o.c. within the min. 4-inch (Optional) SBS-SBS-TA or S-7480 steel or min. 2,500 psi or more layers, any Ultra Poly SMS Base#15 EHD (steel only)or -60.0 Attachedwide, heat-welded side lapTA or APP-TAAPP-TA structrual concretecombinationTrufast #14 HD (concrete only) Min. 22 ga., type B, 40 ksi Min. 2-inch, One or Prelim. Plates with Trufast #15 12-inch o.c. within the min. 4-inch (Optional) SBS-SBS-TA or S-75steel or min. 2,500 psi more layers, any Ultra Poly SMS Base-67.5 AttachedEHD (steel only)or Trufast wide, heat-welded side lapTA or APP-TAAPP-TA structrual concretecombination #14 HD (concrete only) Min. 22 ga., type B, Grade Min. 1.5-inch, One OMG Flat Bottom Plates 6-inch o.c. at 4-inch lap and 6-inch BP-AA, SBS-AA, Prelim. Glasbase; Yosemite SBS-AA, SBS- S-7633 steel or min. 2,500 psi or more layers, any with OMG #14 HD o.c. in two (2), equally spaced, SBS-TA or APP--67.5 AttachedVenting BaseTA or APP-TA structrual concretecombination(Accutrac)staggered center rowsTA Min. 22 ga., type B, Grade Min. 1.5-inch, One Flexiglas Base; Flintlastic 6-inch o.c. at 4-inch lap and 6-inch BP-AA, SBS-AA, Prelim. SBS-AA, SBS- S-7733 steel or min. 2,500 psi or more layers, any Base 20; Yosemite Note2o.c. in two (2), equally spaced, SBS-TA or APP--67.5 AttachedTA or APP-TA structrual concretecombinationVenting Basestaggered center rowsTA Glasbase; Flexiglas; Flintlastic Base 20; All FlintFast3 in. Insulation Min. 22 ga., type B, Grade Min. 1.5-inch, One 6-inch o.c. at 4-inch lap and 6-inch (Optional) BP- Prelim. Weather / Empire Base; Plates with FlintFast #14; SBS-AAor S-7833 steel or min. 2,500 psi or more layers, any o.c. atthree (3)equally spaced, AA, SBS-AAor -97.5 AttachPoly SMS Base; Ultra Poly Trufast 3" Metal Insulation SBS-TA structrual concretecombinationstaggered center rowsSBS-TA SMS Base; Yosemite Plates with TrufastHD Venting Base Min. 22 ga., type B, 40 ksi Min. 2-inch, One or Prelim. Plates with Trufast #15 6-inch o.c. within the min. 4-inch (Optional) SBS-SBS-TA or S-79steel or min. 2,500 psi more layers, any Ultra Poly SMS Base-112.5 AttachedEHD (steel only)or Trufast wide, heat-welded side lapTA or APP-TAAPP-TA structrual concretecombination #14 HD (concrete only) Min. 22 ga., type B, Grade Min. 1.5-inch, One 12-inch o.c. at 4-inch lap and 12- Prelim. Poly SMS Base; Ultra Poly SBS-TA or APP-SBS-TA or S-8080 steel or min. 2,500 psi or more layers, any Note2inch o.c. in two (2), equally spaced, -112.5 AttachedSMS BaseTAAPP-TA structrual concretecombinationstaggered center rows Min. 22 ga., type B, Grade Min. 1.5-inch, One 12-inch o.c. at 4-inch lap and 12- Prelim. Poly SMS Base; Ultra Poly SBS-AA or S-8180 steel or min. 2,500 psi or more layers, any Note2inch o.c. in two (2), equally spaced, SBS-AA-120.0 AttachedSMS BaseSBS-TA structrual concretecombinationstaggered center rows NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 28of 74 N EMO|etc. TABLE2C: STEELORSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION,REROOF(T EAR-O FF)OR RECOVER SYSTEMTYPED: INSULATED,MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Insulation Layer(s)(Note 13)Base SheetRoof Cover (Note 15) Deck System MDP No.(psf) (Note1) TypeAttachTypeFastenersAttachBase PlyCap Ply 6-inch o.c. within the min. 4-inch wide, heat-welded side laps and 6- Min. 22 ga., type B, 40 ksi Min. 2-inch, One or Prelim. Plates with Trufast #15 inch o.c. in one (1) center row, (Optional) SBS-SBS-TA or steel or min. 2,500 psi more layers, any S-82Ultra Poly SMS Base-165.0 AttachedEHD (steel only)or Trufast stripped-in with 6-inch side strips TA or APP-TAAPP-TA structrual concretecombination of torch-applied Poly SMS Base or #14 HD (concrete only) Ultra Poly SMS Base. C OLD-A PPLIED S YSTEMS: Glasbase; All Min. 22 ga., type B, Grade Min. 1.5-inch, One 6-inch o.c. at 4-inch lap and 12- Prelim. Weather/Empire Base; 33 steel or min. 2,500 psi or more layers, any inch o.c. in two (2), equally spaced, S-83Note2SBS-CA1SBS-CA1-45.0* AttachedFlexiglas Base; Flintlastic structrual concretecombinationstaggered center rows Base 20 Glasbase; Flexiglas Base; Flintlastic Base 20; All FlintFast #14 HD with Min. 22 ga., type B, Grade Min. 1-inch, One or Weather / Empire Base; 6-inch o.c. at 4-inch lap and 12- (Optional) SBS- S-8440steel or min. 2,500 psi more layers, any Loose-laidYosemite Venting Base; Plates or Trufast HD with inch o.c. in three (3), equally SBS-CA1-75.0 CA1 structrual concretecombinationFlintlastic Poly SMS Base; spaced, staggered center rows Flintlastic Ultra Poly SMS Plates Base NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 29of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) S ELF-A DHERING S YSTEMS: Structural Min. 1.5-inch ACFoam II, FlintBoard, Min. 0.25-inch SECUROCK (Optional) C-1.FlintPrimeHAHANoneSBS-SASBS-SA-172.5 concreteENRGY 3 or H-ShieldGypsum-Fiber Roof BoardSBS-SA Structural Min. 1.5-inch ACFoam II, FlintBoard, FlintPrime or (Optional) C-2.FlintPrimeHAMin. 0.25-inch DensDeckHASBS-SASBS-SA-192.5 concreteENRGY 3 or Multi-Max FA3FlintPrime SASBS-SA Structural Min. 1.5-inch ACFoam II, FlintBoard, FlintPrime or (Optional) C-3.NoneA-PDMin. 0.25-inch DensDeckA-PDSBS-SASBS-SA-105.0 concreteENRGY 3 or Multi-Max FA3FlintPrime SASBS-SA Structural Min. 1.5-inch ACFoam II, FlintBoard, Min. 0.25-inch SECUROCK (Optional) C-4.NoneA-PDA-PDNoneSBS-SASBS-SA-172.5 concreteENRGY 3 or H-ShieldGypsum-Fiber Roof BoardSBS-SA A-PDA-PD Structural Min. 1.5-inch ACFoam II, FlintBoard, FlintPrime or (Optional) C-5.NoneMin. 0.25-inch DensDeckSBS-SASBS-SA-192.5 concreteENRGY 3 or Multi-Max FA3FlintPrime SASBS-SA 6-inch o.c.6-inch o.c. Structural (Optional) FlintPrime or (Optional) C-6.Min. 1.5-inch Multi-Max FAD-ISMin. 0.25-inch DensDeckD-ISSBS-SASBS-SA-67.5 concreteFlintPrimeFlintPrime SASBS-SA Structural (Optional) FlintPrime or (Optional) C-7.Min. 1.5-inch ENRGY 3D-ISMin. 0.25-inch DensDeckD-ISSBS-SASBS-SA-112.5 concreteFlintPrimeFlintPrime SASBS-SA Structural (Optional) FlintPrime or (Optional) C-8.Min. 1.5-inch ACFoam II or FlintBoardD-ISMin. 0.25-inch DensDeckD-ISSBS-SASBS-SA-120.0 concreteFlintPrimeFlintPrime SASBS-SA Structural Min. 1.5-inch ACFoam II, FlintBoard, Min. 0.25-inch SECUROCK (Optional) C-9.NoneD-ISD-ISNoneSBS-SASBS-SA-172.5 concreteENRGY 3 or H-ShieldGypsum-Fiber Roof BoardSBS-SA (Optional) Min. 1.5-inch ACFoam II, Structural M-OSFA or Min. 0.5-inch ACFoam HD M-OSFA or FlintPrime or (Optional) C-10.NoneFlintBoard ISO, H-Shield, FlintBoard SBS-SASBS-SA-97.5 concreteM-PG1Coverboard or H-Shield HDM-PG1FlintPrime SASBS-SA ISO H Structural Min. 1.5-inch ACFoam II, FlintBoard, M-OSFA or Min. 0.25-inch SECUROCK M-OSFA or (Optional) C-11.NoneNoneSBS-SASBS-SA-172.5 concreteENRGY 3 or H-ShieldM-PG1Gypsum-Fiber Roof BoardM-PG1SBS-SA Structural Min. 1.5-inch ACFoam II, FlintBoard, M-OSFA or M-OSFA or FlintPrime or (Optional) C-12.NoneMin. 0.25-inch DensDeckSBS-SASBS-SA-192.5 concreteENRGY 3 or Multi-Max FAM-PG1M-PG1FlintPrime SASBS-SA (Optional) Min. 1.5-inch ACFoam II, M-OSFA or M-OSFA or Structural Min. 0.25-inch SECUROCK (Optional) C-13.NoneFlintBoard ISO, H-Shield, FlintBoard M-PG1, 6-M-PG1, 6-FlintPrimeSBS-SASBS-SA-315.0 concreteGypsum-Fiber Roof BoardSBS-SA ISOinch o.c.inch o.c. H (Optional) Min. 1.5-inch ACFoam II, M-OSFA or M-OSFA or Structural Min. 0.5-inch ACFoam HD FlintPrime or (Optional) C-14.NoneFlintBoard ISO, H-Shield, FlintBoard M-PG1, 6-M-PG1, 6-SBS-SASBS-SA-315.0 concreteCoverboard or H-Shield HDFlintPrime SASBS-SA ISOinch o.c.inch o.c. H Structural Min. 1.5-inch ACFoam II, FlintBoard FlintPrime or (Optional) C-15.FlintPrimeOB500Min. 0.25-inch DensDeckOB500SBS-SASBS-SA-120.0 concreteISO or ENRGY 3FlintPrime SASBS-SA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 30of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Structural Min. 1.5-inch ACFoam II, FlintBoard FlintPrime or (Optional) C-16.NoneOB500Min. 0.25-inch DensDeckOB500SBS-SASBS-SA-150.0 concreteISO or ENRGY 3FlintPrime SASBS-SA Structural Min. 1.5-inch ACFoam II, FlintBoard, Min. 0.25-inch SECUROCK (Optional) C-17.NoneOB500OB500NoneSBS-SASBS-SA-172.5 concreteENRGY 3 or H-ShieldGypsum-Fiber Roof BoardSBS-SA Min. 1.0-inch ISO 95+ GL, H-Shield, H- ICP BOARD-ICP BOARD- Structural Shield CG, ENRGY 3 or min. 1.3-inch Min. 0.25-inch SECUROCK (Optional) C-18.NoneMAX or CR-MAX or CR-NoneSBS-SASBS-SA-172.5 concreteACFoam III, Min. 1.5-inch Multi-Max Gypsum-Fiber Roof BoardSBS-SA 2020 FA3 or Ultra-Max Min. 1.0-inch ISO 95+ GL, H-Shield, H- ICP BOARD-ICP BOARD- Structural Shield CG, ENRGY 3 or min. 1.3-inch FlintPrime or (Optional) C-19.NoneMAX or CR-Min. 0.25-inch DensDeckMAX or CR-SBS-SASBS-SA-192.5 concreteACFoam III, Min. 1.5-inch Multi-Max FlintPrime SASBS-SA 2020 FA3 or Ultra-Max H YBRID S YSTEMS: Flintlastic (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard (Optional) Additional layer(s) C-20.FlintPrimeHAHANoneUltra Glass SBS-AA, SBS-SBS-TA, -322.5 concreteISO, H-Shield, FlintBoard ISObase insulation H SATA, APP-TAAPP-TA Black (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard (Optional) Additional layer(s) C-21.FlintPrimeHAHANoneDiamond SBS-AA, SBS-SBS-TA, -375.0 concreteISO, H-Shield, FlintBoard ISObase insulation H Base SheetTA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard (Optional) Additional layer(s) C-22.NoneA-PDA-PDNoneSBS-SA-HSBS-AA, SBS-SBS-TA, -180.0 concreteISO, H-Shield, FlintBoard ISObase insulation H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK C-23.NoneA-PDA-PDNoneSBS-SA-HSBS-AA, SBS-SBS-TA, -117.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof Board H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard A-PD, 6-Min. 0.25-inch SECUROCK A-PD, 6- C-24.NoneNoneSBS-SA-HSBS-AA, SBS-SBS-TA, -217.5 concreteISO, H-Shield, FlintBoard ISOinch o.c.Gypsum-Fiber Roof Boardinch o.c. H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum-A-PD, 6- C-25.NoneNoneN/ANoneSBS-SA-HSBS-AA, SBS-SBS-TA, -195.0 concreteFiber Roof Boardinch o.c. TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard (Optional) Additional layer(s) C-26.NoneD-ISD-ISNoneSBS-SA-HSBS-AA, SBS-SBS-TA, -135.0 concreteISO, H-Shield, FlintBoard ISObase insulation H TA, APP-TAAPP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 31of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK C-27.NoneD-ISD-ISNoneSBS-SA-HSBS-AA, SBS-SBS-TA, -217.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof Board H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum- C-28.NoneD-ISNoneN/ANoneSBS-SA-HSBS-AA, SBS-SBS-TA, -195.0 concreteFiber Roof Board TA, APP-TAAPP-TA (Optional) Min. 1.5-inch ACFoam II, (Optional) SBS-AA, Structural M-OSFA or Min. 0.5-inch ACFoam HD M-OSFA or C-29.NoneFlintBoard ISO, H-Shield, FlintBoard NoneSBS-SA-HSBS-AA, SBS-SBS-TA, -97.5 concreteM-PG1Coverboard or H-Shield HDM-PG1 ISOTA, APP-TAAPP-TA H (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard (Optional) Additional layer(s) C-30.NoneM-OSFAM-OSFANoneSBS-SA-HSBS-AA, SBS-SBS-TA, -232.5 concreteISO, H-Shield, FlintBoard ISObase insulation H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK C-31.NoneM-OSFAM-OSFANoneSBS-SA-HSBS-AA, SBS-SBS-TA, -217.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof Board H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum- C-32.NoneM-OSFANoneN/ANoneSBS-SA-HSBS-AA, SBS-SBS-TA, -195.0 concreteFiber Roof Board TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard (Optional) Additional layer(s) C-33.NoneM-PG1M-PG1NoneSBS-SA-HSBS-AA, SBS-SBS-TA, -270.0 concreteISO, H-Shield, FlintBoard ISObase insulation H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK C-34.NoneM-PG1M-PG1NoneSBS-SA-HSBS-AA, SBS-SBS-TA, -217.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof Board H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum- C-35.NoneM-PG1NoneN/ANoneSBS-SA-HSBS-AA, SBS-SBS-TA, -195.0 concreteFiber Roof Board TA, APP-TAAPP-TA Min.0.25-inch DensDeck (Optional) Min. 1.5-inch ACFoam II, M-OSFA or M-OSFA or (Optional) SBS-AA, Prime or SECUROCK Gypsum- Structural C-36.NoneFlintBoard ISO, H-Shield, FlintBoard M-PG1, 6-Fiber Roof Board or min.0.5-M-PG1, 6-NoneSBS-SA-HSBS-AA, SBS-SBS-TA, -315.0 concrete ISOinch o.c.inch ACFoam HD Coverboard inch o.c.TA, APP-TAAPP-TA H or H-Shield HD (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard (Optional) Additional layer(s) SBS-AA, SBS-SBS-TA, C-37.NoneOB500OB500NoneSBS-SA-H-135.0 concreteISO, H-Shield, FlintBoard ISObase insulation H TA, APP-TAAPP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 32of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) (Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK C-38.NoneOB500OB500NoneSBS-SA-HSBS-AA, SBS-SBS-TA, -217.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof Board H TA, APP-TAAPP-TA (Optional) SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum- C-39.NoneOB500NoneN/ANoneSBS-SA-HSBS-AA, SBS-SBS-TA, -195.0 concreteFiber Roof Board TA, APP-TAAPP-TA ICP BOARD-ICP BOARD-(Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard (Optional) Additional layer(s) C-40.NoneMAX or CR-MAX or CR-NoneSBS-SA-HSBS-AA, SBS-SBS-TA, -270.0 concreteISO, H-Shield, FlintBoard ISObase insulation H 2020TA, APP-TAAPP-TA ICP BOARD-ICP BOARD-(Optional) SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK C-41.NoneMAX or CR-MAX or CR-NoneSBS-SA-HSBS-AA, SBS-SBS-TA, -217.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof Board H 2020TA, APP-TAAPP-TA ICP BOARD-(Optional) SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum- C-42.NoneMAX or CR-NoneN/ANoneSBS-SA-HSBS-AA, SBS-SBS-TA, -195.0 concreteFiber Roof Board 20TA, APP-TAAPP-TA C ONVENTIONAL S YSTEMS: Structural Min. 1.5-inch ACFoam II, ENRGY 3, H-(Optional) Additional layer(s) BP-AA3, 24-(Optional) BP- C-43.FlintPrimeHAHANoneSBS-AA-37.5 concreteShield, FlintBoard ISOof base insulationinch gridAA, SBS-AA Structural Min. 1.5-inch ACFoam II or FlintBoard Min. 0.25-inch DensDeck, (Optional) C-44.FlintPrimeHAHANoneSBS-TASBS-TA-180.0 concreteISO.DensDeckPrimeSBS-TA (Optional) BP- BP-AA, SBS-SBS-AA, Structural (Optional) Min. 1.5-inch ACFoam II or Min. 0.25-inch SECUROCK AA, SBS-AA, C-45.FlintPrimeHAHANoneAA, SBS-TA SBS-TA or -180.0 concreteFlintBoard ISO.Gypsum-Fiber Roof BoardSBS-TA or or APP-TAAPP-TA APP-TA (Optional) BP- SBS-AA, Structural (Optional) Min. 2-inch ACFoam II, Min. 0.25-inch SECUROCK BP-AA or AA, SBS-AA, C-46.FlintPrimeHAHANoneSBS-TA or -225.0 concreteFlintBoard ISO, ENRGY 3 or H-ShieldGypsum-Fiber Roof BoardSBS-AASBS-TA or APP-TA APP-TA (Optional) Min. 1.5-inch ACFoam II, Structural Min. 0.25-inch SECUROCK (Optional) C-47.FlintPrimeFlintBoard ISO, H-Shield, FlintBoard HAHANoneAPP-TAAPP-TA-252.5 concreteGypsum-Fiber Roof BoardAPP-TA ISO H (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.5-inch Structodek High BP-AA or AA, SBS-AA, SBS-TA or C-48.FlintPrimeHAHANone-227.0 concreteISO, ENRGY 3 or H-Shield Density FiberboardSBS-AASBS-TA or APP-TA APP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 33of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) (Optional) Structural (Optional) Min. 2-inch ACFoam II, Min. 0.25-inch SECUROCK SBS-TA or SBS-TA or C-49.FlintPrimeHAHANoneSBS-TA or -232.5 concreteFlintBoard ISO, ENRGY 3 or H-ShieldGypsum-Fiber Roof BoardAPP-TAAPP-TA APP-TA (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard BP-AA or AA, SBS-AA, C-50.FlintPrimeHAMin. 0.25-inch DensDeckHANoneSBS-TA or -240.0 concreteISO, ENRGY 3 or H-Shield SBS-AASBS-TA or APP-TA APP-TA (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II or FlintBoard Min. 0.75-inch FescoBoard BP-AA or AA, SBS-AA, C-51.FlintPrimeHAHANoneSBS-TA or -412.0 SBS-TA or concreteISO(homogeneous)SBS-AA APP-TA APP-TA (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II or FlintBoard Min. 0.5-inch DuraBoard BP-AA or AA, SBS-AA, C-52.FlintPrimeHAHANoneSBS-TA or -430.0 concreteISO(homogeneous)SBS-AASBS-TA or APP-TA APP-TA 0.5-inch Structodek High Density Structural (Optional) BP- C-53.FlintPrimeFiberboard or min. 0.75-inch Fesco HANoneN/ANoneBP-AASBS-AA-437.5 concreteAA or SBS-AA Board (homogeneous) 0.25-inch DensDeck, DensDeckPrime (Optional) Structural SBS-AA or C-54.FlintPrimeor SECUROCK Gypsum-Fiber Roof HANoneN/ANoneSBS-TASBS-AA or -302.5 concreteSBS-TA BoardSBS-TA (Optional) Flintlastic Flintlastic Structural Min. 0.25-inch SECUROCK Gypsum-Ultra Poly C-55.FlintPrimeHANoneN/ANoneUltra Poly SBS-TA-487.5 concreteFiber Roof BoardSMS Base, SMS Base, torched torched 0.25-inch DensDeck, DensDeckPrime Structural (Optional) BP- C-56.FlintPrimeor SECUROCK Gypsum-Fiber Roof HANoneN/ANoneBP-AASBS-AA-537.5 concreteAA or SBS-AA Board (Optional) BP- Min. 0.5-inch Structodek High SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard BP-AA or AA, SBS-AA, C-57.NoneA-PDDensity Fiberboard or Min. A-PDNoneSBS-TA or -105.0 concreteISO, ENRGY 3 or H-Shield SBS-AASBS-TA or 0.25-inch DensDeckAPP-TA APP-TA (Optional) BP- Min. 0.5-inch Structodek High SBS-AA, A-PDA-PD Structural Min. 1.5-inch ACFoam II, FlintBoard BP-AA or AA, SBS-AA, C-58.NoneDensity Fiberboard or Min. NoneSBS-TA or -217.5 concreteISO, ENRGY 3 or H-Shield SBS-AASBS-TA or 6-inch o.c.6-inch o.c. 0.25-inch DensDeckAPP-TA APP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 34of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) (Optional) BP- BP-AA, SBS-SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK AA, SBS-AA, AA, SBS-TA SBS-TA or C-59.NoneA-PDA-PDNone-117.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof BoardSBS-TA or H or APP-TAAPP-TA APP-TA (Optional) BP- BP-AA, SBS-SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard A-PD, 6-Min. 0.25-inch SECUROCK A-PD, 6-AA, SBS-AA, C-60.NoneNoneAA, SBS-TA SBS-TA or -217.5 concreteISO, H-Shield, FlintBoard ISOinch o.c.Gypsum-Fiber Roof Boardinch o.c.SBS-TA or H or APP-TAAPP-TA APP-TA (Optional) BP- SBS-AA, Structural 0.5-inch Structodek High Density A-PD, 6-BP-AA, SBS-AA, SBS-AA, C-61.NoneNoneN/ANoneSBS-TA or -195.0 concreteFiberboard inch o.c.AASBS-TA or APP-TA APP-TA (Optional) BP- Min. 0.25-inch DensDeck, DensDeckBP-AA, SBS-SBS-AA, Structural A-PD, 6-AA, SBS-AA, C-62.NonePrime or SECUROCK Gypsum-Fiber NoneN/ANoneAA, SBS-TA SBS-TA or -195.0 concreteinch o.c.SBS-TA or Roof Boardor APP-TAAPP-TA APP-TA Structural Min. 1.5-inch ACFoam II or FlintBoard (Optional) C-63.NoneD-ISMin. 0.25-inch DensDeckD-ISNoneSBS-TASBS-TA-112.5 concreteISO.SBS-TA (Optional) BP- Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch DensDeckBP-AA, SBS-SBS-AA or C-64.NoneD-ISD-ISNoneAA, SBS-AA or -297.5 concreteISO, H-Shield, FlintBoard ISOPrimeAASBS-TA H SBS-TA Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch DensDeck(Optional) C-65.NoneD-ISD-ISNoneSBS-TASBS-TA-302.5 concreteISO, H-Shield, FlintBoard ISOPrimeSBS-TA H (Optional) BP- SBS-AA, Structural Min. 2-inch ACFoam II, FlintBoard ISO, Min. 0.25-inch SECUROCK BP-AA or AA, SBS-AA, C-66.NoneD-ISD-ISNoneSBS-TA or -225.0 concreteENRGY 3 or H-ShieldGypsum-Fiber Roof BoardSBS-AASBS-TA or APP-TA APP-TA (Optional) Structural Min. 2-inch ACFoam II, FlintBoard ISO, Min. 0.25-inch SECUROCK SBS-TA or SBS-TA or C-67.NoneD-ISD-ISNoneSBS-TA or -232.5 concreteENRGY 3 or H-ShieldGypsum-Fiber Roof BoardAPP-TAAPP-TA APP-TA Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK (Optional) C-68.NoneD-ISD-ISNoneAPP-TAAPP-TA-252.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof BoardAPP-TA H (Optional) BP- Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK BP-AA, SBS-SBS-AA or AA, SBS-AA or C-69.NoneD-ISD-ISNone-297.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof BoardAA or SBS-TASBS-TA H SBS-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 35of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) (Optional) BP- SBS-AA, Structural 0.5-inch Structodek High Density BP-AA, SBS-AA, SBS-AA, SBS-TA or C-70.NoneD-ISNoneN/ANone-195.0 concreteFiberboardAASBS-TA or APP-TA APP-TA (Optional) BP- BP-AA, SBS-SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum-AA, SBS-AA, C-71.NoneD-ISNoneN/ANoneAA, SBS-TA SBS-TA or -195.0 concreteFiber Roof BoardSBS-TA or or APP-TAAPP-TA APP-TA (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.5-inch Structodek High BP-AA or AA, SBS-AA, C-72.NoneM-OSFAM-OSFANoneSBS-TA or -127.5 concreteISO, ENRGY 3 or H-Shield Density FiberboardSBS-AASBS-TA or APP-TA APP-TA (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.5-inch Structodek High BP-AA or AA, SBS-AA, C-73.NoneM-PG1M-PG1NoneSBS-TA or -180.0 concreteISO, ENRGY 3 or H-Shield Density FiberboardSBS-AASBS-TA or APP-TA APP-TA (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard BP-AA or AA, SBS-AA, C-74.NoneM-OSFAMin. 0.25-inch DensDeckM-OSFANoneSBS-TA or -232.5 concreteISO, ENRGY 3 or H-Shield SBS-AASBS-TA or APP-TA APP-TA (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard BP-AA or AA, SBS-AA, SBS-TA or C-75.NoneM-PG1Min. 0.25-inch DensDeckM-PG1None-240.0 concreteISO, ENRGY 3 or H-Shield SBS-AASBS-TA or APP-TA APP-TA (Optional) BP- Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch DensDeckBP-AA, SBS-SBS-AA or C-76.NoneM-PG1M-PG1NoneAA, SBS-AA or -297.5 concreteISO, H-Shield, FlintBoard ISOPrimeAASBS-TA H SBS-TA Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch DensDeck(Optional) C-77.NoneM-PG1M-PG1NoneSBS-TASBS-TA-302.5 concreteISO, H-Shield, FlintBoard ISOPrimeSBS-TA H (Optional) BP- SBS-AA, Structural Min. 2-inch ACFoam II, FlintBoard ISO, M-OSFA or Min. 0.25-inch SECUROCK M-OSFA or BP-AA or AA, SBS-AA, C-78.NoneNoneSBS-TA or -225.0 concreteENRGY 3 or H-ShieldM-PG1Gypsum-Fiber Roof BoardM-PG1SBS-AASBS-TA or APP-TA APP-TA (Optional) Structural Min. 2-inch ACFoam II, FlintBoard ISO, M-OSFA or Min. 0.25-inch SECUROCK M-OSFA or SBS-TA or SBS-TA or C-79.NoneNoneSBS-TA or -232.5 concreteENRGY 3 or H-ShieldM-PG1Gypsum-Fiber Roof BoardM-PG1APP-TAAPP-TA APP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 36of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Structural Min. 1.5-inch ACFoam II, FlintBoard M-OSFA or Min. 0.25-inch SECUROCK M-OSFA or (Optional) C-80.NoneNoneAPP-TAAPP-TA-252.5 concreteISO, H-Shield, FlintBoard ISOM-PG1Gypsum-Fiber Roof BoardM-PG1APP-TA H (Optional) BP- Structural Min. 1.5-inch ACFoam II, FlintBoard M-OSFA or Min. 0.25-inch SECUROCK M-OSFA or BP-AA, SBS-SBS-AA or C-81.NoneNoneAA, SBS-AA or -297.5 concreteISO, H-Shield, FlintBoard ISOM-PG1Gypsum-Fiber Roof BoardM-PG1AA or SBS-TASBS-TA H SBS-TA (Optional) BP- SBS-AA, Structural 0.5-inch Structodek High Density BP-AA, SBS-AA, SBS-AA, C-82.NoneM-PG1NoneN/ANoneSBS-TA or -195.0 concreteFiberboardAASBS-TA or APP-TA APP-TA (Optional) BP- BP-AA, SBS-SBS-AA, Structural Min. 0.25-inch DensDeckPrime or AA, SBS-AA, C-83.NoneM-PG1NoneN/ANoneAA, SBS-TA SBS-TA or -195.0 concreteSECUROCK Gypsum-Fiber Roof BoardSBS-TA or or APP-TAAPP-TA APP-TA (Optional) Min. 1.5-inch ACFoam II, M-OSFA or Min.0.25-inch DensDeck M-OSFA or (Optional) Structural SBS-AAorSBS-AAor C-84.NoneFlintBoard ISO, H-Shield, FlintBoard M-PG1, 6-Prime or SECUROCK Gypsum-M-PG1, 6-NoneSBS-AAor-315.0 concreteSBS-TASBS-TA ISOinch o.c.Fiber Roof Board inch o.c.SBS-TA H Flintlastic (Optional) Min. 1.5-inch ACFoam II, M-OSFA or Min.0.25-inch DensDeck M-OSFA or Structural STAor(Optional) C-85.NoneFlintBoard ISO, H-Shield, FlintBoard M-PG1, 6-Prime or SECUROCK Gypsum-M-PG1, 6-NoneAPP-TA-315.0 concreteFlintlastic APP-TA ISOinch o.c.Fiber Roof Board inch o.c. H STA Plus (Optional) BP- SBS-AA, Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.5-inch Structodek High BP-AA or AA, SBS-AA, C-86.NoneOB500OB500NoneSBS-TA or -120.0 concreteISO, ENRGY 3 or H-Shield Density FiberboardSBS-AASBS-TA or APP-TA APP-TA (Optional) BP- BP-AA, SBS-SBS-AA, Structural Min. 1.5-inch ACFoam II or FlintBoard Min. 0.25-inch DensDeckor AA, SBS-AA, C-87.NoneOB500OB500NoneAA, SBS-TA SBS-TA or -150.0 concreteISO.DensDeckPrimeSBS-TA or or APP-TAAPP-TA APP-TA (Optional) BP- Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch DensDeckBP-AA, SBS-SBS-AA or C-88.NoneOB500OB500NoneAA, SBS-AA or -297.5 concreteISO, H-Shield, FlintBoard ISOPrimeAA or SBS-TASBS-TA H SBS-TA (Optional) BP- SBS-AA, Structural Min. 2-inch ACFoam II, FlintBoard ISO, Min. 0.25-inch SECUROCK BP-AA or AA, SBS-AA, C-89.NoneOB500OB500NoneSBS-TA or -225.0 concreteENRGY 3 or H-ShieldGypsum-Fiber Roof BoardSBS-AASBS-TA or APP-TA APP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 37of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) (Optional) Structural Min. 2-inch ACFoam II, FlintBoard ISO, Min. 0.25-inch SECUROCK SBS-TA or SBS-TA or C-90.NoneOB500OB500NoneSBS-TA or -232.5 concreteENRGY 3 or H-ShieldGypsum-Fiber Roof BoardAPP-TAAPP-TA APP-TA Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK (Optional) C-91.NoneOB500OB500NoneAPP-TAAPP-TA-252.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof BoardAPP-TA H (Optional) BP- Structural Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK BP-AA, SBS-SBS-AA or AA, SBS-AA or C-92.NoneOB500OB500None-297.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof BoardAA or SBS-TASBS-TA H SBS-TA (Optional) BP- SBS-AA, Structural 0.5-inch Structodek High Density BP-AA, SBS-AA, SBS-AA, C-93.NoneOB500NoneN/ANoneSBS-TA or -195.0 concreteFiberboardAASBS-TA or APP-TA APP-TA (Optional) BP- BP-AA, SBS-SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum-AA, SBS-AA, AA, SBS-TA SBS-TA or C-94.NoneOB500NoneN/ANone-195.0 concreteFiber Roof BoardSBS-TA or or APP-TAAPP-TA APP-TA Min. 0.5-inch Structodek High Min. 1.0-inch ISO 95+ GL, H-Shield, H-(Optional) BP- ICP BOARD-Density Fiberboard or ICP BOARD-SBS-AA, Structural Shield CG, ENRGY 3 or min. 1.3-inch BP-AA or AA, SBS-AA, C-95.NoneMAX or CR-DuraBoard (homogeneous) or MAX or CR-NoneSBS-TA or -180.0 concreteACFoam III, Min. 1.5-inch Multi-Max SBS-AASBS-TA or 20min. 1.5-inch FescoBoard 20APP-TA FA3 or Ultra-Max APP-TA (laminated) Min. 1.0-inch ISO 95+ GL, H-Shield, H-(Optional) BP- ICP BOARD-ICP BOARD-SBS-AA, Structural Shield CG, ENRGY 3 or min. 1.3-inch Min. 0.25-inch SECUROCK BP-AA or AA, SBS-AA, MAX or CR-MAX or CR-SBS-TA or C-96.NoneNone-225.0 concreteACFoam III, Min. 1.5-inch Multi-Max Gypsum-Fiber Roof BoardSBS-AASBS-TA or 2020APP-TA FA3 or Ultra-APP-TA Min. 1.0-inch ISO 95+ GL, H-Shield, H- ICP BOARD-ICP BOARD-(Optional) Structural Shield CG, ENRGY 3 or min. 1.3-inch Min. 0.25-inch SECUROCK SBS-TA or SBS-TA or C-97.NoneMAX or CR-MAX or CR-NoneSBS-TA or -232.5 concreteACFoam III, Min. 1.5-inch Multi-Max Gypsum-Fiber Roof BoardAPP-TAAPP-TA 2020APP-TA FA3 or Ultra-Max Min. 1.0-inch ISO 95+ GL, H-Shield, H-(Optional) BP- ICP BOARD-ICP BOARD-SBS-AA, Structural Shield CG, ENRGY 3 or min. 1.3-inch BP-AA or AA, SBS-AA, C-98.NoneMAX or CR-Min. 0.25-inch DensDeckMAX or CR-NoneSBS-TA or -240.0 concreteACFoam III, Min. 1.5-inch Multi-Max SBS-AASBS-TA or 2020APP-TA FA3 or Ultra-Max APP-TA (Optional) BP- ICP BOARD-SBS-AA, Structural 0.5-inch Structodek High Density BP-AA, SBS-AA, SBS-AA, C-99.NoneMAX or CR-NoneN/ANoneSBS-TA or -195.0 concreteFiberboardAASBS-TA or 20APP-TA APP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 38of 74 N EMO|etc. TABLE3A: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER S EE N OTE 16 FOR V APOR B ARRIER OPTIONS Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Sys. MDP Deck PrimerPrimer AttachAttach (Note1) No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) (Optional) BP- ICP BOARD-BP-AA, SBS-SBS-AA, Structural Min. 0.25-inch SECUROCK Gypsum-AA, SBS-AA, MAX or CR-AA, SBS-TA SBS-TA or C-100.NoneNoneN/ANone-195.0 concreteFiber Roof BoardSBS-TA or 20or APP-TAAPP-TA APP-TA C OLD-A PPLIED S YSTEMS: (Optional) Min. 0.5-inch ACFoam II, Min. 1.5-inch ACFoam III, OB500, ICP OB500, ICP Structural BOARD-MAX BOARD-MAX FlintBoard ISO, H-Shield, FlintBoard FlintBoard Iso Cold, H-Shield C-101.NoneNoneSBS-CA1NoneSBS-CA1-82.5 concrete or CR-20or CR-20 ISOCG or FlintBoard Iso Cold HH Flintlastic (Optional) (Optional) Min. 1.5-inch ACFoam II, Structural M-OSFA or Min. 0.25-inch DEXcell FA Glass M-OSFA or Poly SMS Flintlastic Poly C-102.NoneFlintBoard ISO, H-Shield, FlintBoard NoneSBS-CA1-90.0 concreteM-PG1Mat Roof BoardM-PG1Base in SMS Base in ISO H FlintBondFlintBond (Optional) Min. 1.5-inch ACFoam II, Structural M-OSFA or Min. 0.5-inch ACFoam HD M-OSFA or C-103.NoneFlintBoard ISO, H-Shield, FlintBoard NoneSBS-CA1NoneSBS-CA1-97.5 concreteM-PG1Coverboard or H-Shield HDM-PG1 ISO H A-PD, D-IS, A-PD, D-IS, M-OSFA, M-M-OSFA, M- Structural Min. 0.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK PG1, OB500, PG1, OB500, C-104.NoneNoneSBS-CA1NoneSBS-CA1-105.0 ICP BOARD-ICP BOARD- concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof Board H MAX or CR-MAX or CR- 2020 Flintlastic (Optional) (Optional) Min. 1.5-inch ACFoam II, M-OSFA or M-OSFA or Structural Min. 0.25-inch DEXcell FA Glass Poly SMS Flintlastic Poly C-105.NoneFlintBoard ISO, H-Shield, FlintBoard M-PG1, 6-M-PG1, 6-NoneSBS-CA1-112.5 concreteMat Roof BoardBase in SMS Base in ISOinch o.c.inch o.c. H FlintBondFlintBond Min. 0.25-inch SECUROCK (Optional) Min. 1.5-inch ACFoam II, M-OSFA or M-OSFA or Structural Gypsum-Fiber Roof Board or C-106.NoneFlintBoard ISO, H-Shield, FlintBoard M-PG1, 6-M-PG1, 6-NoneSBS-CA1NoneSBS-CA1-315.0 min. 0.5-inch ACFoam HD concrete ISOinch o.c.inch o.c. H Coverboard or H-Shield HD NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 39of 74 N EMO|etc. TABLE3B: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-3:BONDEDTEMPROOF,BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System Deck PrimerTemp RoofMDP (psf) AttachAttach No.(Note1) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) C OLD-A PPLIED S YSTEMS: Flintlastic SA (Optional) Min. 0.5-inch ACFoam II, Min. 1.5-inch ACFoam III, Structural C-107.FlintPrimePlyBase, self-FlintBoard ISO, H-Shield, FlintBoard OB500FlintBoard Iso Cold, H-Shield CG OB500SBS-CA1NoneSBS-CA1-82.5 concrete adheredISOor FlintBoard Iso Cold HH Flintlastic SA Structural Min. 0.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK C-108.FlintPrimePlyBase, self-OB500OB500SBS-CA1NoneSBS-CA1-82.5 concreteISO, H-Shield, FlintBoard ISOGypsum-Fiber Roof Board H adhered TABLE3C: STRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEF:NON-INSULATED,BONDEDROOFCOVER Roof Cover (Note 15) Deck System PrimerMDP(psf) No. (Note1) Base PlyPlyCap Ply S ELF-A DHERING S YSTEMS: C-109.Structural concreteFlintPrime SASBS-SA(Optional) SBS-SASBS-SA-555.0 C-110.Structural concreteFlintPrimeSBS-SA(Optional) SBS-SASBS-SA-630.0 H YBRID S YSTEMS: C-111.Structural concreteFlintPrime SAFlintlastic Ultra Glass SA(Optional) SBS-AA, SBS-TA, APP-TASBS-AA, SBS-TA, APP-TA-52.5 C-112.Structural concreteFlintPrimeFlintlastic Ultra Glass SA(Optional) SBS-AA SBS-AA-135.0 C-113.Structural concreteFlintPrimeBlack Diamond Base Sheet(Optional) SBS-TA, APP-TASBS-TA, APP-TA-150.0 C-114.Structural concreteFlintPrimeFlintlastic Ultra Glass SA(Optional) SBS-TA, APP-TASBS-TA, APP-TA-322.5 C-115.Structural concreteFlintPrimeBlack Diamond Base Sheet(Optional) BP-AA, SBS-AASBS-AA-240.0 C-116.Structural concreteFlintPrimeBP-AA, SBS-AASBS-SA-HSBS-AA, SBS-TA, APP-TA-635.0 C ONVENTIONAL S YSTEMS: C-117.Structural concreteFlintPrimeAPP-TA(Optional) APP-TAAPP-TA-420.0 C-118.Structural concreteFlintPrimeSBS-TA(Optional) SBS-TASBS-TA-542.5 C-119.Structural concreteFlintPrimeBP-AA, SBS-AA(Optional) BP-AA, SBS-AA, SBS-TA or APP-TASBS-AA, SBS-TA or APP-TA-635.0 C OLD-A PPLIED S YSTEMS: C-120.Structural concreteFlintPrimeSBS-CA1(Optional) SBS-CA1SBS-CA1-262.5 NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 40of 74 N EMO|etc. TABLE4A: LIGHTWEIGHTCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerCoverboardRoof Cover (Note 15) DeckLWIC System MDP No.(psf) (Note 1)(Note 14) TypeAttachTypeAttachBase PlyPlyCap Ply C ELCORE (FL2037): S ELF-A DHERING S YSTEMS: Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH (Optional) SBS- LWC-1M-OSFASECUROCK Gypsum-M-OSFASBS-SASBS-SA-52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H-SA Fiber Roof Board spanModifying AdmixtureShield or H-Shield CG Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH (Optional) SBS- LWC-2M-PG1SECUROCK Gypsum-M-PG1SBS-SASBS-SA-52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H-SA Fiber Roof Board spanModifying AdmixtureShield or H-Shield CG Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH (Optional) SBS- LWC-3OB500SECUROCK Gypsum-OB500SBS-SASBS-SA-52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H-SA Fiber Roof Board spanModifying AdmixtureShield or H-Shield CG Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH ICP BOARD-ICP BOARD-(Optional) SBS- LWC-4SECUROCK Gypsum-SBS-SASBS-SA-52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H-MAXMAXSA Fiber Roof Board spanModifying AdmixtureShield or H-Shield CG Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH (Optional) SBS- LWC-5CR-20SECUROCK Gypsum-CR-20SBS-SASBS-SA-52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H-SA Fiber Roof Board spanModifying AdmixtureShield or H-Shield CG H YBRID S YSTEMS: M-OSFA, M-M-OSFA, M- Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch (Optional) Min. 0.25- PG1, ICP PG1, ICP (Optional) SBS-SBS-AA, Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH inch SECUROCK LWC-6BOARD-MAX, BOARD-MAX, SBS-SA-HAA, SBS-TA or SBS-TA or -52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H-Gypsum-Fiber Roof ICP CR-20 or ICP CR-20 or APP-TAAPP-TA spanModifying AdmixtureShield or H-Shield CGBoard OB500OB500 C ONVENTIONAL S YSTEMS: Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch BP-AA or (Optional) BP-SBS-AA, Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH LWC-7M-OSFASECUROCK Gypsum-M-OSFASBS-AA, SBS-AA,SBS-AA, SBS-SBS-TA or -52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H- Fiber Roof BoardTA or APP-TATA or APP-TAAPP-TA spanModifying AdmixtureShield or H-Shield CG Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch BP-AA or (Optional) BP-SBS-AA, Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH LWC-8M-PG1SECUROCK Gypsum-M-PG1SBS-AA, SBS-AA, SBS-AA, SBS-SBS-TA or -52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H- Fiber Roof BoardTA or APP-TATA or APP-TAAPP-TA spanModifying AdmixtureShield or H-Shield CG NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 41of 74 N EMO|etc. TABLE4A: LIGHTWEIGHTCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerCoverboardRoof Cover (Note 15) DeckLWIC System MDP No.(psf) (Note 1)(Note 14) TypeAttachTypeAttachBase PlyPlyCap Ply Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch BP-AA or (Optional) BP-SBS-AA, Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH LWC-9OB500SECUROCK Gypsum-OB500SBS-AA, SBS-AA, SBS-AA, SBS-SBS-TA or -52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H- Fiber Roof BoardTA or APP-TATA or APP-TAAPP-TA spanModifying AdmixtureShield or H-Shield CG Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch BP-AA or (Optional) BP-SBS-AA, ICP BOARD-ICP BOARD- Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH LWC-10SECUROCK Gypsum-SBS-AA, SBS-AA, SBS-AA, SBS-SBS-TA or -52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H-MAXMAX Fiber Roof BoardTA or APP-TATA or APP-TAAPP-TA spanModifying AdmixtureShield or H-Shield CG Min. 22 ga., Min. 300 psi Celcore MF One or more layer(s), min. 1.5-inch Min. 0.25-inch BP-AA or (Optional) BP-SBS-AA, Type BV, Grade Cellular Concrete with thick FlintBoard ISO, FlintBoardH LWC-11CR-20SECUROCK Gypsum-CR-20SBS-AA, SBS-AA, SBS-AA, SBS-SBS-TA or -52.5 33 steel; 6 ft Celcore HS Rheology ISO, ACFoam II, ACFoam III, H- Fiber Roof BoardTA or APP-TATA or APP-TAAPP-TA spanModifying AdmixtureShield or H-Shield CG E LASTIZELL (FL4994): C OLD A PPLIED S YSTEMS: Min. 22 ga., Min. 350 psi, min 2-inch (Optional) Additional Type BV, Grade OB500, 6-inch OB500, 6-inch BP-CA3 or (Optional) BP- LWC-12Range II Elastizell with Min. 1.5-inch H-Shield CGlayers of base SBS-CA3-60.0 33 steel; 5 ft o.c.o.c.SBS-CA3CA3 or SBS-CA3 Zell-Crete Fibers.insulation span Min. 350 psi, min 2-inch Range II Elastizell with Zell- Min. 22 ga., Crete Fibers. When (Optional) Additional Type BV, Grade OB500, 6-inch OB500, 6-inch BP-CA3 or (Optional) BP- walkable, attach LWC with LWC-13Min. 1.5-inch H-Shield CGlayers of base SBS-CA3-67.5 FlintFast#14 and FlintFast 33 steel; 5 ft o.c.o.c.SBS-CA3CA3 or SBS-CA3 insulation span 2 ftthrough to the structural deck. NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 42of 74 N EMO|etc. TABLE4B: LIGHTWEIGHTCONCRETEOVERSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerCoverboardRoof Cover (Note 15) DeckLWIC System MDP AttachAttach No.(psf) (Note 1)(Note 14) TypeTypePrimerBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) C ELCORE (FL2037): S ELF-A DHERING S YSTEMS: Min. 300 psi Celcore One or more layer(s), min. 1.5-inch MF Cellular Concrete Min. 0.25-inch Structural thick FlintBoard ISO, FlintBoardH (Optional) LWC-14with Celcore HS M-OSFASECUROCK Gypsum-Fiber M-OSFANoneSBS-SASBS-SA-172.5 concreteISO, ACFoam II, ACFoam III, H-SBS-SA Rheology Modifying Roof Board Shield or H-Shield CG Admixture Min. 300 psi Celcore One or more layer(s), min. 1.5-inch MF Cellular Concrete Min. 0.25-inch Structural thick FlintBoard ISO, FlintBoardH (Optional) LWC-15with Celcore HS M-PG1SECUROCK Gypsum-Fiber M-PG1NoneSBS-SASBS-SA-172.5 concreteISO, ACFoam II, ACFoam III, H-SBS-SA Rheology Modifying Roof Board Shield or H-Shield CG Admixture Min. 300 psi Celcore One or more layer(s), min. 1.5-inch MF Cellular Concrete Min. 0.25-inch (Optional) Structural thick FlintBoard ISO, FlintBoardH LWC-16with Celcore HS OB500SECUROCK Gypsum-Fiber OB500NoneSBS-SASBS-SA-172.5 concreteISO, ACFoam II, ACFoam III, H-SBS-SA Rheology Modifying Roof Board Shield or H-Shield CG Admixture Min. 1.0-inch ISO 95+ GL, H-Shield, Min. 200 psi, min. 2-Min. 0.25-inch Structural H-Shield CG, ENRGY 3 or min. 1.3-(Optional) inch CelcoreCellular SECUROCK Gypsum-Fiber LWC-17CR-20CR-20NoneSBS-SASBS-SA-172.5 concreteinch ACFoam III, Min. 1.5-inch SBS-SA ConcreteRoof Board Multi-Max FA3 or Ultra-Max Min. 300 psi Celcore One or more layer(s), min. 1.5-inch MF Cellular Concrete Min. 0.25-inch Structural thick FlintBoard ISO, FlintBoardH (Optional) LWC-18with Celcore HS CR-20SECUROCK Gypsum-Fiber CR-20NoneSBS-SASBS-SA-172.5 concreteISO, ACFoam II, ACFoam III, H-SBS-SA Rheology Modifying Roof Board Shield or H-Shield CG Admixture Min. 1.0-inch ISO 95+ GL, H-Shield, FlintPrime Min. 200 psi, min. 2- Structural H-Shield CG, ENRGY 3 or min. 1.3-or (Optional) inch CelcoreCellular LWC-19CR-20Min. 0.25-inch DensDeck CR-20SBS-SASBS-SA-180.0 concreteinch ACFoam III, Min. 1.5-inch FlintPrime SBS-SA Concrete Multi-Max FA3 or Ultra-Max SA H YBRID S YSTEMS: Min. 300 psi Celcore M-OSFA, M-M-OSFA, M- One or more layer(s), min. 1.5-inch SBS-AA, MF Cellular Concrete PG1, ICP (Optional) Min. 0.25-inch PG1, ICP (Optional) Structural thick FlintBoard ISO, FlintBoardH SBS-TA LWC-20with Celcore HS BOARD-MAX, SECUROCK Gypsum-Fiber BOARD-MAX, NoneSBS-SA-HSBS-AA, SBS--215.0 ISO, ACFoam II, ACFoam III, H-or APP- concrete Rheology Modifying ICP CR-20 or Roof BoardICP CR-20 or TA or APP-TA Shield or H-Shield CGTA AdmixtureOB500OB500 C ONVENTIONAL S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 43of 74 N EMO|etc. TABLE4B: LIGHTWEIGHTCONCRETEOVERSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerCoverboardRoof Cover (Note 15) DeckLWIC System MDP AttachAttach No.(psf) (Note 1)(Note 14) TypeTypePrimerBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Min. 300 psi Celcore One or more layer(s), min. 1.5-inch BP-AA, (Optional) SBS-AA, MF Cellular Concrete Min. 0.25-inch Structural thick FlintBoard ISO, FlintBoardH SBS-AA, BP-AA, SBS-SBS-TA LWC-21with Celcore HS M-OSFASECUROCK Gypsum-Fiber M-OSFANone-215.0 concreteISO, ACFoam II, ACFoam III, H-SBS-TA or AA, SBS-TA or APP- Rheology Modifying Roof Board Shield or H-Shield CGAPP-TAor APP-TATA Admixture Min. 300 psi Celcore One or more layer(s), min. 1.5-inch BP-AA, (Optional) SBS-AA, MF Cellular Concrete Min. 0.25-inch Structural thick FlintBoard ISO, FlintBoardH SBS-AA, BP-AA, SBS-SBS-TA LWC-22with Celcore HS M-PG1SECUROCK Gypsum-Fiber M-PG1None-215.0 concreteISO, ACFoam II, ACFoam III, H-SBS-TA or AA, SBS-TA or APP- Rheology Modifying Roof Board Shield or H-Shield CGAPP-TAorAPP-TATA Admixture Min. 300 psi Celcore One or more layer(s), min. 1.5-inch BP-AA, (Optional) SBS-AA, MF Cellular Concrete Min. 0.25-inch Structural thick FlintBoard ISO, FlintBoardH SBS-AA, BP-AA, SBS-SBS-TA LWC-23with Celcore HS OB500SECUROCK Gypsum-Fiber OB500None-215.0 concreteISO, ACFoam II, ACFoam III, H-SBS-TA or AA, SBS-TA or APP- Rheology Modifying Roof Board Shield or H-Shield CGAPP-TAorAPP-TATA Admixture Min. 300 psi Celcore One or more layer(s), min. 1.5-inch BP-AA, (Optional) SBS-AA, MF Cellular Concrete Min. 0.25-inch Structural thick FlintBoard ISO, FlintBoardH ICP BOARD-ICP BOARD-SBS-AA, BP-AA, SBS-SBS-TA LWC-24with Celcore HS SECUROCK Gypsum-Fiber None-215.0 concreteISO, ACFoam II, ACFoam III, H-MAXMAXSBS-TA or AA, SBS-TA or APP- Rheology Modifying Roof Board Shield or H-Shield CGAPP-TAor APP-TATA Admixture Min. 0.5-inch Structodek Min. 1.0-inch ISO 95+ GL, H-Shield, High Density Fiberboard (Optional) SBS-AA, Min. 200 psi, min. 2- Structural H-Shield CG, ENRGY 3 or min. 1.3-or DuraBoard BP-AA or BP-AA, SBS-SBS-TA LWC-25inch CelcoreCellular CR-20CR-20None-180.0 concreteinch ACFoam III, Min. 1.5-inch (homogeneous) or min. SBS-AAAA, SBS-TA or APP- Concrete Multi-Max FA3 or Ultra-Max 1.5-inch FescoBoard or APP-TATA (laminated) Min. 1.0-inch ISO 95+ GL, H-Shield, Min. 0.25-inch (Optional) SBS-AA, Min. 200 psi, min. 2-BP-AA, SBS- Structural H-Shield CG, ENRGY 3 or min. 1.3-SECUROCK Gypsum-Fiber BP-AA, SBS-SBS-TA LWC-26inch CelcoreCellular CR-20CR-20NoneAA, SBS-TA -180.0 concreteinch ACFoam III, Min. 1.5-inch Roof Board or DensDeck AA, SBS-TA or APP- Concreteor APP-TA Multi-Max FA3 or Ultra-Max or DensDeck Primeor APP-TATA Min. 300 psi Celcore One or more layer(s), min. 1.5-inch BP-AA, (Optional) SBS-AA, MF Cellular Concrete Min. 0.25-inch Structural thick FlintBoard ISO, FlintBoardH SBS-AA, BP-AA, SBS-SBS-TA LWC-27with Celcore HS CR-20SECUROCK Gypsum-Fiber CR-20None-215.0 concreteISO, ACFoam II, ACFoam III, H-SBS-TA or AA, SBS-TA or APP- Rheology Modifying Roof Board Shield or H-Shield CGAPP-TAorAPP-TATA Admixture E LASTIZELL (FL4994): S ELF-A DHERING S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 44of 74 N EMO|etc. TABLE4B: LIGHTWEIGHTCONCRETEOVERSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerCoverboardRoof Cover (Note 15) DeckLWIC System MDP AttachAttach No.(psf) (Note 1)(Note 14) TypeTypePrimerBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Min. 0.25-inch Structural Min. 200 psi, min. 2-Min. 1.5-inch ACFoam II, A-PD, 6-inch A-PD, 6-inch (Optional) LWC-28SECUROCK Gypsum-Fiber NoneSBS-SASBS-SA-172.5 concreteinch ElastizellFlintBoard, ENRGY 3 or H-Shieldo.c.o.c.SBS-SA Roof Board FlintPrime Min. 1.5-inch ACFoam II, Structural Min. 200 psi, min. 2-A-PD, 6-inch A-PD, 6-inch or (Optional) LWC-29FlintBoard, ENRGY 3 or Multi-Max Min. 0.25-inch DensDeck SBS-SASBS-SA-187.5 concreteFlintPrime inch Elastizello.c.o.c.SBS-SA FA3 SA FlintPrime Structural Min. 200 psi, min. 2-Min. 1.5-inch ACFoam II, FlintBoard or (Optional) LWC-30OB500Min. 0.25-inch DensDeck OB500SBS-SASBS-SA-150.0 concreteinch ElastizellISO or ENRGY 3FlintPrime SBS-SA SA Min. 0.25-inch Structural Min. 200 psi, min. 2-Min. 1.5-inch ACFoam II, (Optional) LWC-31OB500SECUROCK Gypsum-Fiber OB500NoneSBS-SASBS-SA-172.5 concrete inch ElastizellFlintBoard, ENRGY 3 or H-ShieldSBS-SA Roof Board Min. 1.0-inch ISO 95+ GL, H-Shield, Min. 0.25-inch Structural Min. 200 psi, min. 2-H-Shield CG, ENRGY 3 or min. 1.3-(Optional) LWC-32CR-20SECUROCK Gypsum-Fiber CR-20NoneSBS-SASBS-SA-172.5 concreteinch Elastizellinch ACFoam III, Min. 1.5-inch SBS-SA Roof Board Multi-Max FA3 or Ultra-Max Min. 1.0-inch ISO 95+ GL, H-Shield, FlintPrime Structural Min. 200 psi, min. 2-H-Shield CG, ENRGY 3 or min. 1.3-or (Optional) LWC-33CR-20Min. 0.25-inch DensDeck CR-20SBS-SASBS-SA-180.0 concreteinch ACFoam III, Min. 1.5-inch FlintPrime inch ElastizellSBS-SA Multi-Max FA3 or Ultra-Max SA C ONVENTIONAL S YSTEMS: Min. 0.5-inch Structodek (Optional) SBS-AA, A-PDA-PD Structural Min. 200 psi, min. 2-Min. 1.5-inch ACFoam II, FlintBoard High Density Fiberboard BP-AA or BP-AA, SBS-SBS-TA LWC-34None-187.5 concreteinch ElastizellISO, ENRGY 3 or H-Shield or Min. 0.25-inch SBS-AAAA, SBS-TA or APP- 6-inch o.c.6-inch o.c. DensDeckor APP-TATA BP-AA or (Optional) SBS-AA, Min. 0.25-inch Structural Min. 200 psi, min. 2-Min. 1.5-inch ACFoam II, FlintBoard A-PD, 6-inch A-PD, 6-inch SBS-AA, BP-AA, SBS-SBS-TA LWC-35SECUROCK Gypsum-Fiber None-217.5 concreteinch ElastizellISO, ENRGY 3 or H-Shield o.c.o.c.SBS-TA or AA, SBS-TA or APP- Roof Board APP-TAor APP-TATA (Optional) SBS-AA, BP-AA, SBS- Structural Min. 200 psi, min. 2-Min. 1.5-inch ACFoam II or Min. 0.25-inch DensDeck BP-AA, SBS-SBS-TA LWC-36OB500OB500NoneAA, SBS-TA -150.0 concreteinch ElastizellFlintBoard ISO.or DensDeck PrimeAA, SBS-TA or APP- or APP-TA or APP-TATA Min. 0.25-inch Structural Min. 200 psi, min. 2-Min. 1.5-inch ACFoam II or (Optional) LWC-37OB500SECUROCK Gypsum-Fiber OB500NoneSBS-TASBS-TA-180.0 concreteinch ElastizellFlintBoard ISO.SBS-TA Roof Board NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 45of 74 N EMO|etc. TABLE4B: LIGHTWEIGHTCONCRETEOVERSTRUCTURALCONCRETEDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerCoverboardRoof Cover (Note 15) DeckLWIC System MDP AttachAttach No.(psf) (Note 1)(Note 14) TypeTypePrimerBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) BP-AA, (Optional) SBS-AA, Min. 0.25-inch Structural Min. 200 psi, min. 2-Min. 2-inch ACFoam II, FlintBoard SBS-AA, BP-AA, SBS-SBS-TA LWC-38OB500SECUROCK Gypsum-Fiber OB500None-225.0 concreteinch ElastizellISO, ENRGY 3 or H-ShieldSBS-TA or AA, SBS-TA or APP- Roof Board APP-TAor APP-TATA Min. 0.5-inch Structodek Min. 1.0-inch ISO 95+ GL, H-Shield, High Density Fiberboard (Optional) SBS-AA, Structural Min. 200 psi, min. 2-H-Shield CG, ENRGY 3 or min. 1.3-or DuraBoard BP-AA or BP-AA, SBS-SBS-TA LWC-39CR-20CR-20None-180.0 concreteinch Elastizellinch ACFoam III, Min. 1.5-inch (homogeneous) or min. SBS-AAAA, SBS-TA or APP- Multi-Max FA3 or Ultra-Max 1.5-inch FescoBoard or APP-TATA (laminated) Min. 1.0-inch ISO 95+ GL, H-Shield, Min. 0.25-inch (Optional) SBS-AA, BP-AA, SBS- Structural Min. 200 psi, min. 2-H-Shield CG, ENRGY 3 or min. 1.3-SECUROCK Gypsum-Fiber BP-AA, SBS-SBS-TA AA, SBS-TA LWC-40CR-20CR-20None-180.0 concreteinch Elastizellinch ACFoam III, Min. 1.5-inch Roof Board or DensDeck AA, SBS-TA or APP- or APP-TA Multi-Max FA3 or Ultra-Max or DensDeck Primeor APP-TATA C OLD A PPLIED S YSTEMS: Min. 350 psi, min 2-(Optional) Structural OB500, 6-inch (Optional) Additional OB500, 6-inch BP-CA3 or LWC-41inch Elastizell with Min. 1.5-inch H-Shield CGNoneBP-CA3 or SBS-CA3-60.0 concreteo.c.layers of base insulationo.c.SBS-CA3 Zell-Crete Fibers.SBS-CA3 Min. 350 psi, min 2-inch Range II Elastizell with Zell-Crete Fibers. When (Optional) Structural OB500, 6-inch (Optional) Additional OB500, 6-inch BP-CA3 or walkable, attach LWC LWC-42Min. 1.5-inch H-Shield CGNoneBP-CA3 or SBS-CA3-67.5 with FlintFast#14 and concreteo.c.layers of base insulationo.c.SBS-CA3 SBS-CA3 FlintFast 2 at 1 per 8 ftthrough to the structural deck. NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 46of 74 N EMO|etc. TABLE4C: LIGHTWEIGHTINSULATINGCONCRETEOVERSTRUCTURALCONCRETEDECKS-NEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: LWCTODECK,BONDEDVAPORBARRIER,BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerCoverboardRoof Cover (Note 15) LWIC System Deck MDP Attach Attach Vapor BarrierPrimer No.(Note 1)(psf) (Note 14) Type(Notes Type(Notes Base PlyPlyCap Ply 6&7)6&7) P RE-E XISTENT C ELLULAR LWC: S ELF-A DHERING S YSTEMS: Flintlastic Ultra Poly SMS Base Sheet Min. 400 psi, Min. 2- (Optional) 0.5- applied in Millennium Hurricane Force One or more layers, inch thick, existing (> Min. 22 in. DensDeck FlintPrime Membrane Adhesive HS, ribbons max. min. 2-in. ACFoam 28 days old) cellular ga., Type M-OSFA Prime or M-OSFA or (Optional) 6-inch o.c. 3-inch wide side laps and 6- lightweight concrete; LWC-43II, FlintBoard ISO, H-SBS-SASBS-SA-67.5 inch wide end laps are hot-air-welded, BV, Grade or M-PG1SECUROCK or M-PG1FlintPrime SBS-SA Repair LWC spalls with Shield or FlintBoard torch-welded or sealed with Millennium 40 steelGypsum-Fiber SA Celcore SBS (Sanded H ISO Hurricane Force Lap and Flashing Roof Board Bonding Surface) Adhesive H YBRID S YSTEMS: Flintlastic Ultra Poly SMS Base Sheet Min. 400 psi, Min. 2- 0.5-in. applied in Millennium Hurricane Force One or more layers, inch thick, existing (> Min. 22 DensDeck Membrane Adhesive HS, ribbons max. min. 2-in. ACFoam (Optional) SBS-TA 28 days old) cellular ga., Type M-OSFA Prime or M-OSFA (Optional) 6-inch o.c. 3-inch wide side laps and 6- lightweight concrete; LWC-44II, FlintBoard ISO, H-SBS-SA-HSBS-TA or or APP--67.5 inch wide end laps are hot-air-welded, BV, Grade or M-PG1SECUROCK or M-PG1FlintPrime Repair LWC spalls with Shield or FlintBoard APP-TATA torch-welded or sealed with Millennium Gypsum-Fiber 40 steel Celcore SBS (Sanded H ISO Hurricane Force Lap and Flashing Roof Board Bonding Surface) Adhesive C ONVENTIONAL S YSTEMS: Flintlastic Ultra Poly SMS Base Sheet Min. 400 psi, Min. 2- 0.5-in. applied in Millennium Hurricane Force One or more layers, inch thick, existing (> Min. 22 DensDeck Membrane Adhesive HS, ribbons max. min. 2-in. ACFoam (Optional) SBS-TA 28 days old) cellular ga., Type M-OSFA Prime or M-OSFA (Optional) SBS-TA or 6-inch o.c. 3-inch wide side laps and 6- lightweight concrete; LWC-45II, FlintBoard ISO, H-SBS-TA or or APP--67.5 inch wide end laps are hot-air-welded, BV, Grade or M-PG1SECUROCK or M-PG1FlintPrimeAPP-TA Repair LWC spalls with Shield or FlintBoard APP-TATA torch-welded or sealed with Millennium Gypsum-Fiber 40 steel Celcore SBS (Sanded H ISO Hurricane Force Lap and Flashing Roof Board Bonding Surface) Adhesive E LASTIZELL (FL4994): S ELF-A DHERING S YSTEMS: All Weather / Empire Base Sheet (Optional) 0.5- One or more layers, applied in Millennium Hurricane Force in. DensDeck FlintPrime min. 2-in. ACFoam Membrane Adhesive, ribbons max. 6- Structural Min. 420 psi, min. M-OSFA Prime or M-OSFA or (Optional) inch o.c.; 3-inch wide side laps and 6- LWC-46II, FlintBoard ISO, H-SBS-SASBS-SA-67.5 Concrete2-inch Elastizellor M-PG1SECUROCK or M-PG1FlintPrime SBS-SA inch wide end laps are sealed with Shield or FlintBoard Gypsum-Fiber SA Millennium Hurricane Force Lap and H ISO Roof Board Flashing Adhesive NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 47of 74 N EMO|etc. TABLE4C: LIGHTWEIGHTINSULATINGCONCRETEOVERSTRUCTURALCONCRETEDECKS-NEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1: LWCTODECK,BONDEDVAPORBARRIER,BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerCoverboardRoof Cover (Note 15) LWIC System Deck MDP Attach Attach Vapor BarrierPrimer No.(Note 1)(psf) (Note 14) Type(Notes Type(Notes Base PlyPlyCap Ply 6&7)6&7) Flintlastic Ultra Poly SMS Base Sheet (Optional) 0.5- applied in Millennium Hurricane Force One or more layers, in. DensDeck FlintPrime Membrane Adhesive, ribbons max. 6- min. 2-in. ACFoam Structural Min. 420 psi, min. M-OSFA Prime or M-OSFA or (Optional) inch o.c.; 3-inch wide side laps and 6- LWC-47SBS-SASBS-SA-67.5 II, FlintBoard ISO, H- inch wide end laps are hot-air-welded, Concrete2-inch Elastizellor M-PG1SECUROCK or M-PG1FlintPrime SBS-SA Shield or FlintBoard torch-welded or sealed with Millennium Gypsum-Fiber SA H ISO Hurricane Force Lap and Flashing Roof Board Adhesive H YBRID S YSTEMS: All Weather / Empire Base Sheet 0.5-in. One or more layers, applied in Millennium Hurricane Force DensDeck min. 2-in. ACFoam (Optional) SBS-TA Membrane Adhesive, ribbons max. 6- Structural Min. 420 psi, min. M-OSFA Prime or M-OSFA (Optional) inch o.c.; 3-inch wide side laps and 6- LWC-48II, FlintBoard ISO, H-SBS-SA-HSBS-TA or or APP--67.5 Concrete2-inch Elastizellor M-PG1SECUROCK or M-PG1FlintPrime inch wide end laps are sealed with Shield or FlintBoard APP-TATA Gypsum-Fiber Millennium Hurricane Force Lap and H ISO Roof Board Flashing Adhesive Flintlastic Ultra Poly SMS Base Sheet 0.5-in. applied in Millennium Hurricane Force One or more layers, DensDeck Membrane Adhesive, ribbons max. 6- min. 2-in. ACFoam (Optional) SBS-TA Structural Min. 420 psi, min. M-OSFA Prime or M-OSFA (Optional) inch o.c.; 3-inch wide side laps and 6- LWC-49II, FlintBoard ISO, H-SBS-SA-HSBS-TA or or APP--67.5 inch wide end laps are hot-air-welded, Concrete2-inch Elastizellor M-PG1SECUROCK or M-PG1FlintPrime Shield or FlintBoard APP-TATA torch-welded or sealed with Millennium Gypsum-Fiber H ISO Hurricane Force Lap and Flashing Roof Board Adhesive C ONVENTIONAL S YSTEMS: All Weather / Empire Base Sheet 0.5-in. One or more layers, applied in Millennium Hurricane Force DensDeck min. 2-in. ACFoam (Optional) SBS-TA Membrane Adhesive, ribbons max. 6- Structural Min. 420 psi, min. M-OSFA Prime or M-OSFA (Optional) SBS-TA or inch o.c.; 3-inch wide side laps and 6- LWC-50II, FlintBoard ISO, H-SBS-TA or or APP--67.5 Concrete2-inch Elastizellor M-PG1SECUROCK or M-PG1FlintPrimeAPP-TA inch wide end laps are sealed with Shield or FlintBoard APP-TATA Gypsum-Fiber Millennium Hurricane Force Lap and H ISO Roof Board Flashing Adhesive Flintlastic Ultra Poly SMS Base Sheet 0.5-in. applied in Millennium Hurricane Force One or more layers, DensDeck Membrane Adhesive, ribbons max. 6- min. 2-in. ACFoam (Optional) SBS-TA Structural Min. 420 psi, min. M-OSFA Prime or M-OSFA (Optional) SBS-TA or inch o.c.; 3-inch wide side laps and 6- LWC-51-67.5 II, FlintBoard ISO, H-SBS-TA or or APP- inch wide end laps are hot-air-welded, Concrete2-inch Elastizellor M-PG1SECUROCK or M-PG1FlintPrimeAPP-TA Shield or FlintBoard APP-TATA torch-welded or sealed with Millennium Gypsum-Fiber H ISO Hurricane Force Lap and Flashing Roof Board Adhesive NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 48of 74 N EMO|etc. TABLE 4D: LIGHTWEIGHT CONCRETE OVER STEEL DECKS NEW CONSTRUCTION or REROOF (Tear-Off) SYSTEM TYPE A-2: MECHANICALLY ATTACHED ANCHOR SHEET, BONDED INSULATION, BONDED ROOF COVER LWIC (Note 14)Anchor SheetInsulationRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note 1) TypeTypeFastenersAttachBaseTopAttachBase PlyPlyCap Ply TreatmentTreatment P RE-E XISTENT C ELLULAR LWC: C ONVENTIONAL S YSTEMS: 9-inch o.c. at the 4-inch side lap Min. 22 ga. Min 350 psi, and 9-inch o.c. at steel or Min. 1.5-BP-AA4, (Optional) min 2-inch pre-Yosemite Venting Trufast Twin-two, equally (Optional) Additional Hot structural NoneNoneinch 18-inch BP-AA, SBS-SBS-AA-60.0 existent BaseLoc Nailsspaced, layers base insulationasphalt LWC-52 concrete ACFoam II o.c.AA cellular LWICstaggered rows in deck. the center of the sheet Note:To qualify the LWIC under this assembly, the subject fastener shall achieve an average withdrawal of 88 lbf when tested per ANSI/SPRI FX-1 or TAS 105. C ELCORE (FL2037): S ELF-A DHERING S YSTEMS: Min. 470 psi, All (Optional) Min. 0.25- min. 2-inch 7-inch o.c. at the Weather/Empire inch DensDeck Prime Min. 22 ga., Celcore MF min. 4-inch side Min. 1.5" Base Sheet, Trufast FM-or SECUROCK type BV, Celcore S-1 Cellular Celcore PVA laps and 7-inch FlintBoard Flexiglas Base, 90 Base Gypsum-Fiber Roof Hot (Optional) LWC-53Grade 40 Deck Concrete with Curing o.c. at two, ISO or SBA-SASBS-SA-60.0 Glasbase Base Sheet Board. Top surface asphaltSBS-SA steel; 6 ft Preparation Celcore HS Compoundequally spaced, FlintBoard Sheet, Yosemite shall be primed with Fasteners spanRheology staggered center ISO-T Venting Base or FlintPrime or Modifying rows Flintlastic Base 20FlintPrime SA. Admixture H YBRID S YSTEMS: (Optional) Min. Min. 470 psi, 0.125-inch STURDY- All min. 2-inch 7-inch o.c. at the DEK Asphaltic Cover Weather/Empire Min. 22 ga., Celcore MF min. 4-inch side Min. 1.5" Board or min. 0.25- Base Sheet, Trufast FM-(Optional) SBS-AA, type BV, Celcore S-1 Cellular Celcore PVA laps and 7-inch FlintBoard inch DensDeck Prime Flexiglas Base, 90 Base Hot SBS-AA, SBS-TA LWC-54Grade 40 Deck Concrete with Curing o.c. at two, ISO or or SECUROCK SBS-SA-H-60.0 Glasbase Base Sheet asphaltSBS-TA or or APP- steel; 6 ft Preparation Celcore HS Compoundequally spaced, FlintBoard Gypsum-Fiber Roof Sheet, Yosemite FastenersAPP-TATA Rheology staggered center Board. Top surface spanISO-T Venting Base or Modifying rowsmay be optionally Flintlastic Base 20 Admixtureprimed with FlintPrime. C ONVENTIONAL S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 49of 74 N EMO|etc. TABLE 4D: LIGHTWEIGHT CONCRETE OVER STEEL DECKS NEW CONSTRUCTION or REROOF (Tear-Off) SYSTEM TYPE A-2: MECHANICALLY ATTACHED ANCHOR SHEET, BONDED INSULATION, BONDED ROOF COVER LWIC (Note 14)Anchor SheetInsulationRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note 1) TypeTypeFastenersAttachBaseTopAttachBase PlyPlyCap Ply TreatmentTreatment Min. 0.125-inch STURDY-DEK Asphaltic Cover Min. 470 psi, All Board, min. 0.25-inch min. 2-inch 7-inch o.c. at the Weather/Empire DensDeck Prime or Min. 22 ga., Celcore MF min. 4-inch side Min. 1.5" BaseSheet, Trufast FM-SECUROCK Gypsum-(Optional) SBS-AA, type BV, Celcore S-1 Cellular Celcore PVA laps and 7-inch FlintBoard Flexiglas Base, 90 Base Fiber Roof Board, SBS-AA, SBS-TA Hot BP-AA or LWC-55Grade 40 Deck Concrete with Curing o.c. at two, ISO or -60.0 Glasbase Base Sheet min. 0.5-inch asphaltSBS-AASBS-TA or or APP- steel; 6 ft Preparation Celcore HS Compoundequally spaced, FlintBoard Sheet, Yosemite FastenersStructodek High APP-TATA Rheology staggered center spanISO-T Venting Base or Density Fiberboard Modifying rows Flintlastic Base 20Roof Insulation or Admixture min. 0.75-inch Fesco Board (homogeneous) Min. 0.125-inch Min. 470 psi, STURDY-DEK All min. 2-inch 7-inch o.c. at the Asphaltic Cover Weather/Empire Min. 22 ga., Celcore MF min. 4-inch side Min. 1.5" Board or min. 0.25- Base Sheet, Trufast FM- type BV, Celcore S-1 Cellular Celcore PVA laps and 7-inch FlintBoard inch DensDeck Prime (Optional) SBS-TA Flexiglas Base, 90 Base Hot SBS-TA or LWC-56Grade 40 Deck Concrete with Curing o.c. at two, ISO or or SECUROCK SBS-TA or or APP--60.0 Glasbase Base Sheet asphaltAPP-TA steel; 6 ft Preparation Celcore HS Compoundequally spaced, FlintBoard Gypsum-Fiber Roof APP-TATA Sheet, Yosemite Fasteners spanRheology staggered center ISO-TBoard. Top surface Venting Base or Modifying may be optionally rows Flintlastic Base 20 Admixtureprimed with FlintPrime. E LASTIZELL (FL4994): S ELF-A DHERING S YSTEMS: All (Optional) Min. 0.25- 7-inch o.c. at the Weather/Empire inch DensDeck Prime Min. 22 ga., Min. 490 psi, min. 4-inch side Min. 1.5" Base Sheet, Trufast FM-or SECUROCK type BV, min. 2-inch laps and 7-inch FlintBoard Flexiglas Base, 90 Base Gypsum-Fiber Roof Hot (Optional) LWC-57Grade 40 NoneElastizell with Noneo.c. at two, ISO or SBA-SASBS-SA-67.5 Glasbase Base Sheet Board. Top surface asphaltSBS-SA steel; 6 ft Zell-Crete equally spaced, FlintBoard Sheet, Yosemite shall be primed with Fasteners spanFibersstaggered center ISO-T Venting Base or FlintPrime or rows Flintlastic Base 20FlintPrime SA. H YBRID S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 50of 74 N EMO|etc. TABLE 4D: LIGHTWEIGHT CONCRETE OVER STEEL DECKS NEW CONSTRUCTION or REROOF (Tear-Off) SYSTEM TYPE A-2: MECHANICALLY ATTACHED ANCHOR SHEET, BONDED INSULATION, BONDED ROOF COVER LWIC (Note 14)Anchor SheetInsulationRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note 1) TypeTypeFastenersAttachBaseTopAttachBase PlyPlyCap Ply TreatmentTreatment (Optional) Min. 0.125-inch STURDY- All 7-inch o.c. at the DEK Asphaltic Cover Weather/Empire Min. 22 ga., Min. 490 psi, min. 4-inch side Min. 1.5" Board or min. 0.25- Base Sheet, Trufast FM-(Optional) SBS-AA, type BV, min. 2-inch laps and 7-inch FlintBoard inchDensDeck Prime Flexiglas Base, 90 Base Hot SBS-AA, SBS-TA LWC-58Grade 40 NoneElastizell with Noneo.c. at two, ISO or or SECUROCK SBS-SA-H-67.5 Glasbase Base Sheet asphaltSBS-TA or or APP- steel; 6 ft Zell-Crete equally spaced, FlintBoard Gypsum-Fiber Roof Sheet, Yosemite FastenersAPP-TATA spanFibersstaggered center ISO-TBoard. Top surface Venting Base or rowsmay be optionally Flintlastic Base 20 primed with FlintPrime. C ONVENTIONAL S YSTEMS: 7-inch o.c. at the 4-inch side lap Min. 22 ga. Min 350 psi, and 7-inch o.c. at steel or Trufast FM-Min. 1.5-BP-AA3, (Optional) min 2-inch two, equally Yosemite Venting (Optional) Additional Hot LWC-59structural NoneNone90 Base Ply inch 18-inch BP-AA, SBS-SBS-AA-37.5* Elastizell Basespaced, layers base insulationasphalt concrete FastenersACFoam IIgridAA cellular LWICstaggered rows in deck. the center of the sheet Min. 0.125-inch STURDY-DEK Asphaltic Cover All Board, min. 0.25-inch 7-inch o.c. at the Weather/Empire DensDeck Prime or Min. 22 ga., Min. 490 psi, min. 4-inch side Min. 1.5" Base Sheet, Trufast FM-SECUROCK Gypsum-(Optional) SBS-AA, type BV, min. 2-inch laps and 7-inch FlintBoard Flexiglas Base, 90 Base Fiber Roof Board, Hot BP-AA or SBS-AA, SBS-TA LWC-60Grade 40 NoneElastizell with Noneo.c. at two, ISO or -67.5 Glasbase Base Sheet min. 0.5-inch asphaltSBS-AASBS-TA or or APP- steel; 6 ft Zell-Crete equally spaced, FlintBoard Sheet, Yosemite FastenersStructodek High APP-TATA staggered center spanFibersISO-T Venting Base or Density Fiberboard rows Flintlastic Base 20Roof Insulation or min. 0.75-inch Fesco Board (homogeneous) Min. 0.125-inch STURDY-DEK All 7-inch o.c. at the Asphaltic Cover Weather/Empire Min. 22 ga., Min. 490 psi, min. 4-inch side Min. 1.5" Board or min. 0.25- Base Sheet, Trufast FM- type BV, min. 2-inch laps and 7-inch FlintBoard inch DensDeck Prime (Optional) SBS-TA Flexiglas Base, 90 Base Hot SBS-TA or Grade 40 Elastizell with o.c. at two, ISO or or SECUROCK SBS-TA or or APP- LWC-61NoneNone-67.5 Glasbase Base Sheet asphaltAPP-TA steel; 6 ft Zell-Crete equally spaced, FlintBoard Gypsum-Fiber Roof APP-TATA Sheet, Yosemite Fasteners spanFibersstaggered center ISO-TBoard. Top surface Venting Base or may be optionally rows Flintlastic Base 20 primed with FlintPrime. NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 51of 74 N EMO|etc. TABLE4E: LIGHTWEIGHTCONCRETEDECKSOVERSTEEL OR STRUCTURALCONCRETEDECKNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER LWIC(Note 14)Base SheetRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note1) LWCTypeFastenersAttachBase PlyCap Ply TreatmentTreatment P RE-E XISTENT C ELLULAR LWIC: S ELF-A DHERING S YSTEMS: Min. 22 ga., Type BV, Grade Min. 300 psi, min. 2-Trufast Twin Loc-7-inch o.c. at the min. 2-inch lap and 7- 33 steel; 5 ft inch pre-existentNail Assembled inch o.c. in two (2), equally spaced, NoneNoneFlintlastic SA NailBaseSBS-SASBS-SA-60.0 spanor cellular lightweight Fastener (min. staggered center rows; Prime stress LWC-62 structural insulating concrete.plates with FlintPrime or FlintPrime SA concrete Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 73 lbf when tested per ANSI/SPRI FX-1 or TAS 105 Min. 22 ga., Type BV, Grade Min. 300 psi, min. 2-Trufast Twin Loc-9-inch o.c. at the min. 2-inch lap and 9- 33 steel; 5 ft inch pre-existentNail Assembled inch o.c. in two (2), equally spaced, NoneNoneFlintlastic SA NailBaseSBS-SASBS-SA-60.0 spanor cellular lightweight Fastener (min. staggered center rows; Prime stress LWC-63 structural insulating concrete.plates with FlintPrime or FlintPrime SA concrete Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 93 lbf when tested per ANSI/SPRI FX-1 or TAS 105 H YBRID S YSTEMS: Min. 22 ga., Type BV, Grade Min. 300 psi, min. 2-Glasbase; Flexiglas Trufast Twin Loc- 9-inch o.c. at the 4-inch lap and 9-inch SBS-AA, SBS- 33 steel; 5 ft inch pre-existentBase; Flintlastic Base Nail Assembled NoneNoneo.c. in two (2), equally spaced, SBS-SA-HTA or APP--60.0 spanor cellular lightweight 20; All Weather / Fastener (min. LWC-64 staggered center rowsTA structural insulating concrete.Empire Base concrete Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 88 lbf when tested per ANSI/SPRI FX-1 or TAS 105 Min. 22 ga., Type BV, Grade Min. 350 psi, min. 3- Flexiglas Base; Trufast FM-90 7-inch o.c. at the 4-inch lap and 10-inch SBS-AA, SBS- 33 steel; 5 ft inch pre-existent Flintlastic Base 20 or Base Sheet o.c. in two (2), equally spaced, TA or APP- NoneNoneSBS-SA-H-67.5 spanor cellular lightweight LWC-65 Poly SMS Base Fastenersstaggered center rowsTA structural insulating concrete. concrete Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 97 lbf when tested per ANSI/SPRI FX-1 or TAS 105 Min. 22 ga., Type BV, Grade Min. 300 psi, min. 2-Trufast Twin Loc- 9-inch o.c. at the 4-inch lap and 9-inch SBS-AA, SBS- 33 steel; 5 ft inch pre-existentPoly SMS Base; Ultra Nail Assembled LWC-66NoneNoneo.c. in two (2), equally spaced, SBS-SA-HTA or APP--75.0 spanor cellular lightweight Fastener (min. Poly SMS Base staggered center rowsTA structural insulating concrete. concrete NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 52of 74 N EMO|etc. TABLE4E: LIGHTWEIGHTCONCRETEDECKSOVERSTEEL OR STRUCTURALCONCRETEDECKNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER LWIC(Note 14)Base SheetRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note1) LWCTypeFastenersAttachBase PlyCap Ply TreatmentTreatment Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 110 lbf when tested per ANSI/SPRI FX-1 or TAS 105 C ONVENTIONAL S YSTEMS: Min. 22 ga., Glasbase; Flexiglas (Optional) Type BV, Grade Min. 300 psi, min. 2-Trufast Twin Loc- Base; Flintlastic Base 9-inch o.c. at the 4-inch lap and 9-inch BP-AA, SBS-AA, SBS- 33 steel; 5 ft inch pre-existentNail Assembled 20; All Weather / o.c. in two (2), equally spaced, SBS-AA, TA or APP- NoneNone-60.0 spanor cellular lightweight Fastener (min. LWC-67 Empire Base; Yosemite staggered center rowsSBS-TA or TA structural insulating concrete. Venting BaseAPP-TA concrete Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 88 lbf when tested per ANSI/SPRI FX-1 or TAS 105 Min. 22 ga., Glasbase; Flexiglas Type BV, Grade Min. 300 psi, min. 2-Trufast Twin Loc- Base; Flintlastic Base 7-inch o.c. at the 4-inch lap and 7-inch SBS-AA, SBS- 33 steel; 5 ft inch pre-existentNail Assembled BP-AA or NoneNone20; All Weather / o.c. in two (2), equally spaced, TA or APP--67.5 spanor cellular lightweight Fastener (min. SBS-AA LWC-68 Empire Base; Yosemite staggered center rowsTA structural insulating concrete. Venting Base concrete Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 77 lbf when tested per ANSI/SPRI FX-1 or TAS 105 Min. 22 ga., Type BV, Grade Min. 350 psi, min. 3-Flexiglas Base; BP-AA, Trufast FM-90 7-inch o.c. at the 4-inch lap and 10-inch SBS-AA, SBS- 33 steel; 5 ft inch pre-existentFlintlastic Base 20; Poly SBS-AA, NoneNoneBase Sheet o.c. in two (2), equally spaced, TA or APP--67.5 spanor cellular lightweight SMS Base; Yosemite SBS-TA or LWC-69 Fastenersstaggered center rowsTA structural insulating concrete.Venting BaseAPP-TA concrete Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 97 lbf when tested per ANSI/SPRI FX-1 or TAS 105 Min. 22 ga., Type BV, Grade Min. 300 psi, min. 2-Trufast Twin Loc-BP-AA, 9-inch o.c. at the 4-inch lap and 9-inch SBS-AA, SBS- 33 steel; 5 ft inch pre-existentPoly SMS Base; Ultra Nail Assembled SBS-AA, NoneNoneo.c. in two (2), equally spaced, TA or APP--75.0 spanor cellular lightweight Poly SMS BaseFastener (min. SBS-TA or LWC-70 staggered center rowsTA structural insulating concrete.APP-TA concrete Note:To qualify the LWIC under this assembly, a 1.8-inch Trufast Twin Loc-Nail Assembled Fastener shall achieve an average withdrawal of 110 lbf when tested per ANSI/SPRI FX-1 or TAS 105 C ELCORE (FL2037): S ELF-A DHERING S YSTEMS: Min. 470 psi, min. 2- Min. 22 ga., type Celcore S-1 inch Celcore MF Celcore Trufast FM-90 7-inch o.c. at the min. 4-inch side laps LWC-71BV, Grade 40 Deck Cellular Concrete with PVA Curing Flintlastic SA NailBaseBase Sheet and 7-inch o.c. at two, equally spaced, SBS-SASBS-SA-45.0 steel; 6 ft spanPreparation Celcore HS Rheology CompoundFastenersstaggered center rows Modifying Admixture NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 53of 74 N EMO|etc. TABLE4E: LIGHTWEIGHTCONCRETEDECKSOVERSTEEL OR STRUCTURALCONCRETEDECKNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER LWIC(Note 14)Base SheetRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note1) LWCTypeFastenersAttachBase PlyCap Ply TreatmentTreatment H YBRID S YSTEMS: Min. 470 psi, min. 2-All Weather/Empire Min. 22 ga., type Celcore S-1 inch Celcore MF Celcore Base Sheet, Flexiglas Trufast FM-90 7-inch o.c. at the min. 4-inch side laps SBS-AA, SBS- LWC-72BV, Grade 40 Deck Cellular Concrete with PVA Curing Base, Glasbase Base Base Sheet and 7-inch o.c. at two, equally spaced, SBS-SA-HTA or APP--45.0 steel; 6 ft spanPreparation Celcore HS Rheology CompoundSheet or Flintlastic Base Fastenersstaggered center rowsTA Modifying Admixture20 Min. 470 psi, min. 2- Min. 22 ga., type Celcore S-1 inch Celcore MF Celcore Yosemite Venting BaseTrufast FM-90 7-inch o.c. at the min. 4-inch side laps SBS-AA, SBS- LWC-73BV, Grade 40 Deck Cellular Concrete with PVA Curing primed with FlintPrime Base Sheet and 7-inch o.c. at two, equally spaced, SBS-SA-HTA or APP--45.0 Celcore HS Rheology steel; 6 ft spanPreparation Compoundor FlintPrime SAFastenersstaggered center rowsTA Modifying Admixture C ONVENTIONAL S YSTEMS: All Weather/Empire Min. 470 psi, min. 2-(Optional) Base Sheet, Flexiglas Min. 22 ga., type Celcore S-1 inch Celcore MF Celcore Trufast FM-90 7-inch o.c. at the min. 4-inch side laps BP-AA, SBS-AA, SBS- Base, Glasbase Base LWC-74BV, Grade 40 Deck Cellular Concrete with PVA Curing Base Sheet and 7-inch o.c. at two, equally spaced, SBS-AA, TA or APP--45.0 Sheet, Yosemite steel; 6 ft spanPreparation Celcore HS Rheology CompoundFastenersstaggered center rowsSBS-TA or TA Venting Base or Modifying AdmixtureAPP-TA Flintlastic Base 20 Min. 22 ga., Min. 300 psi, min 2- (Optional) type B steel at inch Celcore MF Celcore All Weather / Empire Trufast FM-90 9-inch o.c. at 4-inch laps and 12-inch BP-AA, SBS-AA or LWC-75max. 5 ft spans NoneCellular Concrete with PVA Curing Base; Flintlastic Base Base Sheet o.c. in two (2), equally spaced, -60.0 SBS-AA or SBS-TA structural Celcore HS Rheology Compound20; Poly SMS BaseFastenersstaggered center rows SBS-TA concreteModifying Admixture. Min. 22 ga., Glasbase; Flexiglas Type BV, Grade Base; Flintlastic Base Min. 300 psi, min 2-Celcore Trufast FM-90 7-inch o.c. at the 3-inch lap and 7-inch SBS-AA, SBS- 33 steel; 5 ft 20; All Weather / BP-AA or LWC-76Noneinch Celcore Cellular PVA Curing Base Sheet o.c. in two (2), equally spaced, TA or APP--75.0 spanor Empire Base; Poly SMS SBS-AA Concrete.CompoundFastenersstaggered center rowsTA structural Base; Yosemite Venting concreteBase C ONCRECEL (FL5584&FL10500): C ONVENTIONAL S YSTEMS: Min. 22 ga., Glasbase; Flexiglas Type BV, Grade Base; Flintlastic Base Concrecel Min. 300 psi, min 2¼-Concrecel 7-inch o.c. at the 3-inch lap and 7-inch (Optional) SBS-AA, SBS- 33 steel; 5 ft 20; All Weather / OMG CR Base Ply LWC-77Bonding inch Concrecel Curing o.c. in two (2), equally spaced, BP-AA or TA or APP--52.5 spanor Empire Base; Poly SMS Fasteners (1.7) AgentConcrete.Compoundstaggered center rowsSBS-AATA structural Base; Yosemite Venting concreteBase E LASTIZELL (FL4994): NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 54of 74 N EMO|etc. TABLE4E: LIGHTWEIGHTCONCRETEDECKSOVERSTEEL OR STRUCTURALCONCRETEDECKNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER LWIC(Note 14)Base SheetRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note1) LWCTypeFastenersAttachBase PlyCap Ply TreatmentTreatment S ELF-A DHERING S YSTEMS: Min. 22 ga., type Min. 490 psi, min. 2-Trufast FM-90 7-inch o.c. at the min. 4-inch side laps LWC-78BV, Grade 40 Noneinch Elastizell with NoneFlintlastic SA NailBaseBase Sheet and 7-inch o.c. at two, equally spaced, SBS-SASBS-SA-45.0 steel; 6 ft spanZell-Crete FibersFastenersstaggered center rows H YBRID S YSTEMS: Glasbase; Flexiglas Trufast FM-90 Base Min. 26 ga. steel Base; Flintlastic Base 7½-inch o.c. at the 4-inch lap and 7½-SBS-AA, SBS- Sheet Fasteners or at max 5 ft spans Min. 200 psi, min 2- Trufast Twin Loc-Nail LWC-79NoneNone20; All Weather / inch o.c. in two (2), equally spaced, SBS-SA-HTA or APP--30.0 or structural inch Elastizell. Assembled Fasteners Empire Base or Poly staggered center rowsTA concrete (1.8 inch) SMS Base Min. 22 ga., Glasbase; Flexiglas Trufast FM-90 Base Type BV, Grade Base; Flintlastic Base 7-inch o.c. at the 4-inch lap and7-inch SBS-AA, SBS- Sheet Fasteners or 33 steel; 5 ft Min. 200 psi, min 2- Trufast Twin Loc-Nail LWC-80NoneNone20; All Weather / o.c. in two (2), equally spaced, SBS-SA-HTA or APP--45.0 spanor inch Elastizell. Assembled Fasteners Empire Base or Poly staggered center rowsTA structural (1.8 inch) SMS Base concrete All Weather/Empire Min. 22 ga., type Min. 490 psi, min. 2-Base Sheet, Flexiglas Trufast FM-90 7-inch o.c. at the min. 4-inch side laps SBS-AA, SBS- LWC-81BV, Grade 40 Noneinch Elastizell with NoneBase, Glasbase Base Base Sheet and 7-inch o.c. at two, equally spaced, SBS-SA-HTA or APP--45.0 steel; 6 ft spanZell-Crete FibersSheet or Flintlastic Base Fastenersstaggered center rowsTA 20 Min. 22 ga., type Min. 490 psi, min. 2-Yosemite Venting BaseTrufast FM-90 7-inch o.c. at the min. 4-inch side laps SBS-AA, SBS- LWC-82BV, Grade 40 Noneinch Elastizell with Noneprimed with FlintPrime Base Sheet and 7-inch o.c. at two, equally spaced, SBS-SA-HTA or APP--45.0 steel; 6 ft spanZell-Crete Fibersor FlintPrime SAFastenersstaggered center rowsTA C ONVENTIONAL S YSTEMS: Glasbase; Flexiglas (Optional) Trufast FM-90 Base Min. 26 ga. steel Base; Flintlastic Base 7½-inch o.c. at the 4-inch lap and 7½-BP-AA, SBS-AA, SBS- Sheet Fasteners or at max 5 ft spans Min. 200 psi, min 2-20; All Weather / Trufast Twin Loc-Nail LWC-83NoneNoneinch o.c. in two (2), equally spaced, SBS-AA, TA or APP--30.0 or structural inch Elastizell.Empire Base; Poly SMS Assembled Fasteners staggered center rowsSBS-TA or TA concreteBase; Yosemite Venting (1.8 inch) APP-TA Base Min. 26 ga. steel Trufast FM-90 7½-inch o.c. at the 4-inch lap and 7½- at max 5 ft spans Min. 200 psi, min 2-(Optional) LWC-84NoneNoneFlintlastic APP Base TBase Sheet inch o.c. in two (2), equally spaced, APP-TA-30.0 or structural inch Elastizell.APP-TA Fastenersstaggered center rows concrete NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 55of 74 N EMO|etc. TABLE4E: LIGHTWEIGHTCONCRETEDECKSOVERSTEEL OR STRUCTURALCONCRETEDECKNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER LWIC(Note 14)Base SheetRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note1) LWCTypeFastenersAttachBase PlyCap Ply TreatmentTreatment All Weather/Empire (Optional) Base Sheet, Flexiglas Min. 22 ga., type Min. 490 psi, min. 2-Trufast FM-90 7-inch o.c. at the min. 4-inch side laps BP-AA, SBS-AA, SBS- Base, Glasbase Base LWC-85BV, Grade 40 Noneinch Elastizell with NoneBase Sheet and 7-inch o.c. at two, equally spaced, SBS-AA, TA or APP--45.0 Sheet, Yosemite steel; 6 ft spanZell-Crete FibersFastenersstaggered center rowsSBS-TA or TA Venting Base or APP-TA Flintlastic Base 20 Min. 22 ga., Glasbase; Flexiglas (Optional) Trufast FM-90 Base Type BV, Grade Base; Flintlastic Base 7-inch o.c. at the 4-inch lap and 7-inch BP-AA, SBS-AA, SBS- Sheet Fasteners or 33 steel; 5 ft Min. 200 psi, min 2-20; All Weather / Trufast Twin Loc-Nail LWC-86NoneNoneo.c. in two (2), equally spaced, SBS-AA, TA or APP--45.0 spanor inch Elastizell.Empire Base; Poly SMS Assembled Fasteners staggered center rowsSBS-TA or TA structural Base; Yosemite Venting (1.8 inch) APP-TA concreteBase Min. 22 ga., Type BV, Grade Trufast FM-90 7-inch o.c. at the 4-inch lap and 7-inch 33 steel; 5 ft Min. 200 psi, min 2-(Optional) LWC-87NoneNoneFlintlastic APP Base TBase Sheet o.c. in two (2), equally spaced, APP-TA-45.0 spanor inch Elastizell.APP-TA Fastenersstaggered center rows structural concrete C OLD A PPLIED S YSTEMS: Min. 22 ga., Type BV, Grade Min. 350 psi, min 2-Flintlastic Base 20; Trufast FM-90 7-inch o.c. at the 4-inch lap and 7-inch (Optional) 33 steel; 5 ft LWC-88Noneinch Range II Elastizell NoneFlintlastic Poly SMS Base Sheet o.c. in two (2), equally spaced, BP-CA2 or SBS-CA2-45.0 spanor with Zell-Crete Fibers.BaseFastenersstaggered center rowsSBS-CA2 structural concrete Min. 22 ga., Min. 350 psi, min 2-Trufast FM-90 7-inch o.c. at the 4-inch lap and 7-inch (Optional) Type BV, Grade Glasbase; Flexiglas LWC-89Noneinch Range II Elastizell NoneBase Sheet o.c. in two (2), equally spaced, BP-CA3 or SBS-CA3-52.5 33 steel; 5 ft Base; Poly SMS Base with Zell-Crete Fibers.Fastenersstaggered center rowsSBS-CA3 span Min. 350 psi, min 2-Trufast FM-90 7-inch o.c. at the 4-inch lap and 7-inch (Optional) Structural Glasbase; Flexiglas LWC-90Noneinch Range II Elastizell NoneBase Sheet o.c. in two (2), equally spaced, BP-CA3 or SBS-CA3-60.0 concreteBase; Poly SMS Base with Zell-Crete Fibers.Fastenersstaggered center rowsSBS-CA3 M EARLCRETE (FL13492): C ONVENTIONAL S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 56of 74 N EMO|etc. TABLE4E: LIGHTWEIGHTCONCRETEDECKSOVERSTEEL OR STRUCTURALCONCRETEDECKNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEE: MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER LWIC(Note 14)Base SheetRoof Cover (Note 15) Deck System MDP Deck Surface No.(psf) (Note1) LWCTypeFastenersAttachBase PlyCap Ply TreatmentTreatment Min. 22 ga., Glasbase; Flexiglas Type BV, Grade Base; Flintlastic Base 7-inch o.c. at the 4-inch lap and 7-inch (Optional) SBS-AA, SBS- 33 steel; 5 ft Min. 250 psi, min 2-20; All Weather / OMG CR Base Ply LWC-91NoneNoneo.c. in two (2), equally spaced, BP-AA or TA or APP--45.0 spanor Empire Base; Poly SMS inch Mearlcrete.Fasteners (1.7) staggered center rowsSBS-AATA structural Base; Yosemite Venting concreteBase Min. 22 ga., Type BV, Grade 7-inch o.c. at the 4-inch lap and 7-inch (Optional) SBS-AA, SBS- 33 steel; 5 ft Min. 250 psi, min 2-OMG CR Base Ply LWC-92NoneNonePoly SMS Baseo.c. in two (2), equally spaced, BP-AA or TA or APP--52.5 spanor inch Mearlcrete.Fasteners (1.7) staggered center rowsSBS-AATA structural concrete Min. 22 ga., Glasbase; Flexiglas Type BV, Grade Base; Flintlastic Base 7-inch o.c. at the 4-inch lap and 7-inch (Optional) SBS-AA, SBS- 33 steel; 5 ft Min. 300 psi, min 2-20; All Weather / OMG CR Base Ply LWC-93NoneNoneo.c. in two (2), equally spaced, BP-AA or TA or APP--52.5 spanor inch Mearlcrete.Empire Base; Poly SMS Fasteners (1.7) staggered center rowsSBS-AATA structural Base; Yosemite Venting concreteBase TABLE4F: LIGHTWEIGHTCONCRETEDECKSREROOF(T EAR-O FF)OR R ECOVER SYSTEM TYPE E: MECHANICALLY ATTACHED BASE SHEET, BONDED ROOF COVER LWIC (Note 14)BaseSheetRoof Cover (Note 15) System MDP Deck (Note 1) No.(psf) TypeSurfacingBaseFastenersSpacingBase PlyCap Ply P RE-E XISTENT C ELLULAR LWC: Min. 470psi, Min. 2-inch Flintlastic Trufast Versa Fasteners9-inch o.c. within the Min. 22 ga., For reroof (tear-off), repair thick, existing (> 28 days Ultra Poly & Plates; two min. 5-inch wide, (Optional) SBS-TA or Type BV, LWC spalls with Celcore SBS SBS-TA or APP-TA-75.0 old) cellular lightweight SMS Base (2)screws per plateat heat-welded side APP-TA Grade 40 steel(Sanded Bonding Surface) LWC-94 concreteSheet180° from each other*laps Note:*Field withdrawal resistance testing (Note 11) shall yield minimum 322lbf. Additional Versa-Fast Fasteners within each Versa-Fast Plate may be utilized to produce minimum withdrawal resistanceC assembly. NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 57of 74 N EMO|etc. TABLE4G: LIGHTWEIGHTCONCRETEDECKSREROOF(T EAR-O FF) SYSTEM TYPE F: NON-INSULATED, BONDED ROOF COVER LWIC (Note 14)Roof Cover (Note 15) System MDP Deck (Note 1) No.(psf) TypeSurfacingBase PlyCap Ply P RE-E XISTENT C ELLULAR LWC: Flintlastic Ultra Poly SMS Base Sheet applied in Millennium Hurricane Force Membrane Min. 400psi, Min. 2-inch Repair LWC spalls Min. 22 ga., Adhesive HS, ribbons max. 6-inch o.c. 3-inch thick, existing (> 28 days with Celcore SBS LWC-95Type BV, wide side laps and 6-inch wide end laps are SBS-CA1-75.0 old) cellular lightweight (Sanded Bonding Grade 40 steelhot-air-welded, torch-welded or sealed with concreteSurface) Millennium Hurricane Force Lap and Flashing Adhesive Flintlastic Ultra Poly SMS Base Sheet applied in Flintlastic FR Cap 30,Flintlastic FR Cap 30 CoolStar,Flintlastic FR-P,Flintlastic Millennium Hurricane Force Membrane Min. 400psi, Min. 2-inch Repair LWC spalls FR-P CoolStar,Flintlastic Premium FR-P,Flintlastic Premium FR-P CoolStar, Min. 22 ga., Adhesive HS, ribbons max. 6-inch o.c. 3-inch thick, existing (> 28 days with Celcore SBS Flintlastic GMS or Flintlastic GMS CoolStar, applied in Millennium Hurricane LWC-96Type BV, wide side laps and 6-inch wide end laps are -97.5 old) cellular lightweight (Sanded Bonding Force Membrane Adhesive HS, continuous ribbons maximum 6-inch o.c. 3- Grade 40 steelhot-air-welded, torch-welded or sealed with concreteSurface)inch wide side laps and 6-inch wide end laps are hot-air-welded, torch- Millennium Hurricane Force Lap and Flashing welded or sealed with Millennium Hurricane Force Lap and Flashing Adhesive Adhesive NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 58of 74 N EMO|etc. TABLE5A: CEMENTITIOUSWOODFIBERDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Deck System MDP AttachAttach No.(psf) (Notes1&12) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) S ELF-A DHERING S YSTEMS: Existing Min. 0.25-inch DensDeckprimed with Min. 1.5-inch FlintBoard ISO, ACFoam II, ENRGY 3 CWF-1.Tectum(re-OB500FlintPrime or FlintPrime SA; or OB500SBS-SA(Optional) SBS-SASBS-SA-45.0* or Multi-Max FA3 roof only)SECUROCK Gypsum-Fiber Roof Board Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield CG, ICP BOARD-Min. 0.25-inch DensDeckprimed with ICP BOARD- CWF-2.TectumENRGY 3 or min. 1.3-inch ACFoam III, Min. 1.5-MAX or CR-FlintPrime or FlintPrime SA; or MAX or CR-SBS-SA(Optional) SBS-SASBS-SA-52.5 inch Multi-Max FA3 or Ultra-Max 20SECUROCK Gypsum-Fiber Roof Board20 C ONVENTIONAL S YSTEMS: Existing(Optional) BP-AA, Min. 1.5-inch FlintBoard ISO, ACFoam II, ENRGY 3 Min. 0.5-inch Structodek High Density BP-AA or SBS-AA, SBS- Tectum(re-SBS-AA, SBS-TA or CWF-3.OB500OB500-45.0* or Multi-Max FA3FiberboardSBS-AATA or APP-TA roof only)APP-TA ExistingMin. 0.25-inch SECUROCK Gypsum-BP-AA, SBS-(Optional) BP-AA, Min. 1.5-inch FlintBoard ISO, ACFoam II, ENRGY 3 SBS-AA, SBS- CWF-4.Tectum(re-OB500Fiber Roof Board or DensDeckor OB500AA, SBS-TA SBS-AA, SBS-TA or -45.0* or Multi-Max FA3TA or APP-TA roof only)DensDeckPrimeor APP-TAAPP-TA Min. 0.5-inch Structodek High Density Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield CG, ICP BOARD-ICP BOARD-(Optional) BP-AA, Fiberboard or DuraBoard BP-AA or SBS-AA, SBS- CWF-5.TectumENRGY 3 or min. 1.3-inch ACFoam III, Min. 1.5-MAX or CR-MAX or CR-SBS-AA, SBS-TA or -52.5 (homogeneous) or min. 1.5-inch SBS-AATA or APP-TA inch Multi-Max FA3 or Ultra-2020APP-TA FescoBoard (laminated) Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield CG, ICP BOARD-Min. 0.25-inch SECUROCK Gypsum-ICP BOARD-BP-AA, SBS-(Optional) BP-AA, SBS-AA, SBS- CWF-6.TectumENRGY 3 or min. 1.3-inch ACFoam III, Min. 1.5-MAX or CR-Fiber Roof Board or DensDeckor MAX or CR-AA, SBS-TA SBS-AA, SBS-TA or -52.5 TA or APP-TA inch Multi-Max FA3 or Ultra-Max 20DensDeckPrime20or APP-TAAPP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 59of 74 N EMO|etc. TABLE5B: CEMENTITIOUSWOOFFIBERDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF)OR R ECOVER SYSTEMTYPEA-2: MECHANICALLYATTACHEDANCHORSHEET,BONDEDINSULATION,BONDEDROOFCOVER Anchor SheetBase InsulationTop InsulationRoof Cover (Note 15) System MDP Deck AttachAttach Fasteners No.(psf) (Note 1) TypeAttachTypeTypeBase PlyPlyCap Ply (Notes (Notes (Note 11) 6,7,8)6,7,8) H YBRID S YSTEMS: Glasbase; Flexiglas Trufast Twin 6-inch o.c. at the 4-Min. 1.5-inch (Optional) Min. 0.25-(Optional) Base; Flintlastic Base Loc-Nail inch lap and 10-inch ACFoam II, SBS-AA, inch SECUROCK SBS-AA, CWF-7.Tectum20; All Weather / Assembled o.c. in two (2), equally FlintBoard ISO, HAHASBS-SA-HSBS-TA or -60.0 Gypsum-Fiber Roof SBS-TA or Empire Baseor Fastener (Field spaced, staggered ENRGY 3 or Multi-APP-TA BoardAPP-TA Yosemite Venting BaseW/D > 80lbf)center rowsMax FA3 Glasbase; Flexiglas Trufast Twin 7-inch o.c. at the 4-Min. 1.5-inch (Optional) Min. 0.25-(Optional) Base; Flintlastic Base Loc-Nail inch lap and 7-inch ACFoam II, SBS-AA, inch SECUROCK SBS-AA, 20; All Weather / Assembled o.c. in two (2), equally FlintBoard ISO, SBS-TA or CWF-8.TectumHAHASBS-SA-H-60.0 Gypsum-Fiber Roof SBS-TA or Empire Base; Yosemite Fastener (Field spaced, staggered ENRGY 3 or Multi-APP-TA BoardAPP-TA Venting BaseW/D > 69lbf)center rowsMax FA3 C ONVENTIONAL S YSTEMS: Glasbase; Flexiglas Trufast Twin 6-inch o.c. at the 4-Min. 1.5-inch Min. 0.75-inch Base; Flintlastic Base Loc-Nail inch lap and 10-inch ACFoam II, FescoBoard (Optional) SBS-AA, ExistingBP-AA or 20; All Weather / Assembled o.c. in two (2), equally FlintBoard ISO, (homogeneous) or min. BP-AA or SBS-TA or CWF-9.HAHA-60.0 TectumSBS-AA Empire Baseor Fastener (Field spaced, staggered ENRGY 3 or Multi-0.5-inch Structodek SBS-AAAPP-TA Yosemite Venting BaseW/D > 80lbf)center rowsMax FA3High Density Fiberboard Glasbase; Flexiglas Trufast Twin 7-inch o.c. at the 4-Min. 1.5-inch Min. 0.75-inch Base; Flintlastic Base Loc-Nail inch lap and 7-inch ACFoam II, FescoBoard (Optional) SBS-AA, ExistingBP-AA or CWF-10.20; All Weather / Assembled o.c. in two (2), equally FlintBoard ISO, HA(homogeneous) or min. HABP-AA or SBS-TA or -60.0 TectumSBS-AA Empire Base; Yosemite Fastener (Field spaced, staggered ENRGY 3 or Multi-0.5-inch Structodek SBS-AAAPP-TA Venting BaseW/D > 69lbf)center rowsMax FA3High Density Fiberboard NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 60of 74 N EMO|etc. TABLE5C: CEMENTITIOUSWOODFIBERDECKSREROOF(T EAR-O FF)OR RECOVER SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System MDP Base Insulation Layer(s) No.(psf) (Note1) TypeFasteners(Note 11)AttachBase PlyPlyCap Ply Min. 0.5-inch Structodek High OMG Polymer GypTec Existing (Optional) One or more layers, 1 per 2.0 (Optional) BP-AA, SBS-AA, SBS-AA, SBS- Density Fiberboard Roof CWF-11.BP-AA or SBS-AA-45.0* 2 Tectumany combination, loose laidftSBS-TA or APP-TATA or APP-TA Insulation(Field W/D > 180lbf) OMG Polymer GypTec Existing(Optional) One or more layers, Min. 0.25-inch DensDeckor 1 per 1.8 BP-AA, SBS-AA, SBS-(Optional) BP-AA, SBS-AA, SBS-AA, SBS- CWF-12.-45.0* 2 Tectumany combination, loose laidDensDeckPrimeftTA or APP-TASBS-TA or APP-TATA or APP-TA (Field W/D > 160lbf) Min. 0.5-inch Structodek High Trufast Twin Loc-Nail Existing(Optional) One or more layers, 1 per 2.0 (Optional) BP-AA, SBS-AA, SBS-AA, SBS- Density Fiberboard Roof Assembled Fasteners CWF-13.BP-AA or SBS-AA-45.0* 2 Tectumany combination, loose laidftSBS-TA or APP-TATA or APP-TA Insulation(Field W/D > 180lbf) Min. 0.25-inch DensDeckor Trufast Twin Loc-Nail Existing(Optional) One or more layers, DensDeckPrime or 1 per 2.0 BP-AA, SBS-AA, SBS-(Optional) BP-AA, SBS-AA, SBS-AA, SBS- CWF-14.Assembled Fasteners -45.0* 2 Tectumany combination, loose laidSECUROCK Gypsum-Fiber ftTA or APP-TASBS-TA or APP-TATA or APP-TA (Field W/D > 180lbf) Roof Board TABLE5D: CEMENTITOUSWOODFIBERDECKSNEWCONSTRUCTION OR REROOF(T EAR-O FF)OR R EROOF SYSTEMTYPEE: MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP No.(psf) (Note1) BaseFasteners(Note 11)AttachBase PlyCap Ply S ELF-A DHERING S YSTEMS: Trufast Twin Loc-Nail Assembled 6-inch o.c. at the 4-inch lap and 10-inch o.c. in two CWF-15.TectumFlintlastic SA NailBaseSBS-SASBS-SA-60.0 Fastener (Field W/D > 80lbf)(2), equally spaced, staggered center rows Trufast Twin Loc-Nail Assembled 7-inch o.c. at the 4-inch lap and 7-inch o.c. in two CWF-16.TectumFlintlastic SA NailBaseSBS-SASBS-SA-60.0 Fastener (Field W/D > 69lbf)(2), equally spaced, staggered center rows C ONVENTIONAL S YSTEMS: ExistingTrufast Insuldeck Loc-Nail Base All Weather / Empire Base; Yosemite Venting 9-inch o.c. at the 4-inch lap and 12-inch o.c. in two CWF-17.TectumSheet Fastener(Field W/D > 53BP-AA or SBS-AASBS-AA-30.0* Base(2), equally spaced, staggered center rows (reroof only)lbf) ExistingTrufast Insuldeck Loc-Nail Base All Weather / Empire Base; Yosemite Venting 7½-inch o.c. at the 4-inch lap and 7½-inch o.c. in CWF-18.TectumSheet Fastener(Field W/D > 55BP-AA or SBS-AASBS-AA-45.0* Basetwo (2), equally spaced, staggered center rows (reroof only)lbf) Glasbase; Flexiglas Base; Flintlastic Base 20; Trufast Twin Loc-Nail Assembled 6-inch o.c. at the 4-inch lap and 10-inch o.c. in two SBS-AA, SBS-TA CWF-19.TectumAll Weather / Empire Baseor Yosemite BP-AA or SBS-AA-60.0 Fastener (Field W/D > 80lbf)(2), equally spaced, staggered center rowsor APP-TA Venting Base Glasbase; Flexiglas Base; Flintlastic Base 20 Trufast Twin Loc-Nail Assembled 7-inch o.c. at the 4-inch lap and 7-inch o.c. in two SBS-AA, SBS-TA CWF-20.Tectumor All Weather / Empire Base; Yosemite BP-AA or SBS-AA-67.5 Fastener (Field W/D > 77lbf)(2), equally spaced, staggered center rowsor APP-TA Venting Base NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 61of 74 N EMO|etc. TABLE6A: GYPSUMDECKSREROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Deck System MDP AttachAttach No.(psf) (Notes 1 & 12) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) S ELF-A DHERING S YSTEMS: Existing sound Min. 1.5-inch FlintBoard ISO, FlintBoardH Min. 0.25-inch SECUROCK G-1.gypsum or ISO, ACFoam II, ACFoam III, ENRGY 3, H-M-OSFAM-OSFASBS-SA(Optional) SBS-SASBS-SA-172.5 Gypsum-Fiber Roof Board gypsum plankShield or H-Shield CG Existing sound Min. 0.25-inch DensDeck Min. 1.5-inch ACFoam II, FlintBoard, ENRGY 3 G-2.gypsum or M-OSFAprimed with FlintPrime or M-OSFASBS-SA(Optional) SBS-SASBS-SA-192.5 or Multi-Max FA gypsum plankFlintPrime SA Existing sound One or more layer(s), min. 1.5-inch thick Min. 0.25-inch SECUROCK G-3.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, M-PG1M-PG1SBS-SA(Optional) SBS-SASBS-SA-172.5 Gypsum-Fiber Roof Board gypsum plankACFoam III, H-Shield or H-Shield CG Existing sound Min. 0.25-inch DensDeck Min. 1.5-inch ACFoam II, FlintBoard ISO or G-4.gypsum or OB500primed with FlintPrime or OB500SBS-SA(Optional) SBS-SASBS-SA-135.0 ENRGY 3 gypsum plankFlintPrime SA Existing sound One or more layer(s), min. 1.5-inch thick Min. 0.25-inch SECUROCK G-5.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, OB500OB500SBS-SA(Optional) SBS-SASBS-SA-172.5 Gypsum-Fiber Roof Board gypsum plankACFoam III, H-Shield or H-Shield CG Existing sound One or more layer(s), min. 1.5-inch thick ICP BOARD-Min. 0.25-inch SECUROCK ICP BOARD- G-6.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, SBS-SA(Optional) SBS-SASBS-SA-172.5 MAXGypsum-Fiber Roof BoardMAX gypsum plankACFoam III, H-Shield or H-Shield CG One or more layer(s), min. 1.0-inch ISO 95+ Existing sound GL, FlintBoardH ISO, H-Shield, H-Shield CG, Min. 0.25-inch SECUROCK G-7.gypsum or ENRGY 3 or min. 1.3-inch ACFoam III, Min. CR-20CR-20SBS-SA(Optional) SBS-SASBS-SA-172.5 Gypsum-Fiber Roof Board gypsum plank1.5-inch FlintBoard ISO, ACFoam II, Multi- Max FA3 or Ultra-Max Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield Existing sound Min. 0.25-inch DensDeck CG, ENRGY 3 or min. 1.3-inch ACFoam III, G-8.gypsum or CR-20primed with FlintPrime or CR-20SBS-SA(Optional) SBS-SASBS-SA-192.5 Min. 1.5-inch FlintBoard ISO, ACFoam II, gypsum plankFlintPrime SA Multi-Max FA3 or Ultra-Max H YBRID S YSTEMS: M-OSFA, M-M-OSFA, M- Existing sound One or more layer(s), min. 1.5-inch thick PG1, ICP (Optional) Min. 0.25-inch PG1, ICP (Optional) SBS-AA, SBS-AA, SBS- G-9.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, BOARD-MAX, SECUROCK Gypsum-Fiber Roof BOARD-MAX, SBS-SA-H-187.5 SBS-TA or APP-TATA or APP-TA gypsum plankACFoam III, H-Shield or H-Shield CGICP CR-20 or BoardICP CR-20 or OB500OB500 C ONVENTIONAL S YSTEMS: NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 62of 74 N EMO|etc. TABLE6A: GYPSUMDECKSREROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Deck System MDP AttachAttach No.(psf) (Notes 1 & 12) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Existing sound (Optional) BP-AA, Min. 1.5-inch ACFoam II, FlintBoard ISO, Min. 0.5-inch Structodek High BP-AA or SBS-SBS-AA, SBS- G-10.gypsum or M-OSFAM-OSFASBS-AA, SBS-TA or -127.5 ENRGY 3 or H-Shield Density FiberboardAATA or APP-TA gypsum plankAPP-TA Existing sound One or more layer(s), min. 1.5-inch thick BP-AA or SBS-(Optional) BP-AA, Min. 0.25-inch SECUROCK SBS-AA, SBS- G-11.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, M-OSFAM-OSFAAA, SBS-TA or SBS-AA, SBS-TA or -187.5 Gypsum-Fiber Roof BoardTA or APP-TA gypsum plankACFoam III, H-Shield or H-Shield CGAPP-TAAPP-TA Existing sound (Optional) BP-AA, Min. 1.5-inch ACFoam II, FlintBoard ISO, BP-AA or SBS-SBS-AA, SBS- G-12.gypsum or M-OSFAMin. 0.25-inch DensDeckM-OSFASBS-AA, SBS-TA or -232.5 ENRGY 3 or H-Shield AATA or APP-TA gypsum plankAPP-TA Existing sound BP-AA or SBS-(Optional) BP-AA, Min. 2-inch ACFoam II, FlintBoard ISO, Min. 0.25-inch SECUROCK SBS-AA, SBS- G-13.gypsum or M-OSFAM-OSFAAA, SBS-TA or SBS-AA, SBS-TA or -202.5 ENRGY 3 or H-ShieldGypsum-Fiber Roof BoardTA or APP-TA gypsum plankAPP-TAAPP-TA Existing sound One or more layer(s), min. 1.5-inch thick BP-AA or SBS-(Optional) BP-AA, Min. 0.25-inch SECUROCK SBS-AA, SBS- G-14.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, M-PG1M-PG1AA, SBS-TA or SBS-AA, SBS-TA or -187.5 Gypsum-Fiber Roof BoardTA or APP-TA gypsum plankACFoam III, H-Shield or H-Shield CGAPP-TAAPP-TA Existing sound (Optional) BP-AA, Min. 1.5-inch ACFoam II, FlintBoard ISO, Min. 0.5-inch Structodek High BP-AA or SBS-SBS-AA, SBS- G-15.gypsum or OB500OB500SBS-AA, SBS-TA or -120.0 ENRGY 3 or H-Shield Density FiberboardAATA or APP-TA gypsum plankAPP-TA Existing sound Min. 0.25-inch DensDeck, BP-AA, SBS-(Optional) BP-AA, Min. 1.5-inch ACFoam II, FlintBoard ISO, SBS-AA, SBS- G-16.gypsum or OB500DensDeckPrime or SECUROCK OB500AA, SBS-TA or SBS-AA, SBS-TA or -135.0 ENRGY 3 or H-Shield TA or APP-TA gypsum plankGypsum-Fiber Roof BoardAPP-TAAPP-TA Existing sound One or more layer(s), min. 1.5-inch thick BP-AA, SBS-(Optional) BP-AA, Min. 0.25-inch SECUROCK SBS-AA, SBS- G-17.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, OB500OB500AA, SBS-TA or SBS-AA, SBS-TA or -187.5 Gypsum-Fiber Roof BoardTA or APP-TA gypsum plankACFoam III, H-Shield or H-Shield CGAPP-TAAPP-TA Existing sound One or more layer(s), min. 1.5-inch thick BP-AA, SBS-(Optional) BP-AA, ICP BOARD-Min. 0.25-inch SECUROCK ICP BOARD-SBS-AA, SBS- G-18.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, AA, SBS-TA or SBS-AA, SBS-TA or -187.5 MAXGypsum-Fiber Roof BoardMAXTA or APP-TA gypsum plankACFoam III, H-Shield or H-Shield CGAPP-TAAPP-TA Existing sound Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield Min. 0.25-inch DensDeckor G-19.gypsum or CG, ENRGY 3 or min. 1.3-inch ACFoam III, CR-20CR-20SBS-TA(Optional) SBS-TASBS-TA-180.0 DensDeckPrime gypsum plankMin. 1.5-inch Multi-Max FA3 or Ultra-Max Min. 0.5-inch Structodek High Existing sound Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield Density Fiberboard or (Optional) BP-AA, BP-AA or SBS-SBS-AA, SBS- G-20.gypsum or CG, ENRGY 3 or min. 1.3-inch ACFoam III, CR-20DuraBoard (homogeneous) or CR-20SBS-AA, SBS-TA or -180.0 AATA or APP-TA min. 1.5-inch FescoBoard gypsum plankMin. 1.5-inch Multi-Max FA3 or Ultra-Max APP-TA (laminated) Existing sound One or more layer(s), min. 1.5-inch thick BP-AA, SBS-(Optional) BP-AA, Min. 0.25-inch SECUROCK SBS-AA, SBS- G-21.gypsum or FlintBoard ISO, FlintBoardH ISO, ACFoam II, CR-20CR-20AA, SBS-TA or SBS-AA, SBS-TA or -187.5 Gypsum-Fiber Roof BoardTA or APP-TA gypsum plankACFoam III, H-Shield or H-Shield CGAPP-TAAPP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 63of 74 N EMO|etc. TABLE6A: GYPSUMDECKSREROOF(T EAR-O FF) SYSTEMTYPEA-1:BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) Deck System MDP AttachAttach No.(psf) (Notes 1 & 12) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Existing sound Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield (Optional) BP-AA, Min. 0.25-inch SECUROCK BP-AA or SBS-SBS-AA, SBS- G-22.gypsum or CG, ENRGY 3 or min. 1.3-inch ACFoam III, CR-20CR-20SBS-AA, SBS-TA or -225.0 Gypsum-Fiber Roof BoardAATA or APP-TA gypsum plankMin. 1.5-inch Multi-Max FA3 or Ultra-Max APP-TA Existing sound Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield Min. 0.25-inch SECUROCK SBS-TA or (Optional) SBS-TA SBS-TA or G-23.gypsum or CG, ENRGY 3 or min. 1.3-inch ACFoam III, CR-20CR-20-232.5 Gypsum-Fiber Roof BoardAPP-TAor APP-TAAPP-TA gypsum plankMin. 1.5-inch Multi-Max FA3 or Ultra-Max Existing sound Min. 1.0-inch ISO 95+ GL, H-Shield, H-Shield (Optional) BP-AA, BP-AA or SBS-SBS-AA, SBS- G-24.gypsum or CG, ENRGY 3 or min. 1.3-inch ACFoam III, CR-20Min. 0.25-inch DensDeckCR-20SBS-AA, SBS-TA or -240.0 AATA or APP-TA gypsum plankMin. 1.5-inch Multi-Max FA3 or Ultra-Max APP-TA TABLE6B: GYPSUMDECKSREROOF(T EAR-O FF) SYSTEMTYPEA-2: MECHANICALLYATTACHEDANCHORSHEET,BONDEDINSULATION,BONDEDROOFCOVER Anchor SheetBase InsulationTop InsulationRoof Cover (Note 15) Deck System MDP Fasteners No.(psf) (Note1) TypeAttachTypeAttachTypeAttachBase PlyPlyCap Ply (Note 11) H YBRID S YSTEMS: Glasbase; Flexiglas 6-inch o.c. at the 4- Min. 1.5-inch Base; Flintlastic Trufast Twin Loc-inch lap and 10-inch (Optional) Existing sound ACFoam II, SBS-AA, Base 20; All Nail Assembled o.c. in two (2), SBS-SA-SBS-AA, G-25.gypsum or FlintBoard ISO, HANoneN/ASBS-TA or -60.0 Weather / Empire Fastener (Field equally spaced, SBS-TA or H gypsum plankENRGY 3 or Multi-APP-TA Baseor Yosemite W/D > 80lbf)staggered center APP-TA Max FA3 Venting Baserows Glasbase; Flexiglas 7-inch o.c. at the 4- Min. 1.5-inch Base; Flintlastic Trufast Twin Loc-inch lap and 7-inch (Optional) Existing sound ACFoam II, SBS-AA, Base 20; All Nail Assembled o.c. in two (2), SBS-SA-SBS-AA, G-26.gypsum or FlintBoard ISO, HANoneN/ASBS-TA or -60.0 Weather / Empire Fastener(Field equally spaced, HSBS-TA or gypsum plankENRGY 3 or Multi-APP-TA Base; Yosemite W/D > 69lbf)staggered center APP-TA Max FA3 Venting Baserows C ONVENTIONAL S YSTEMS: Trufast FM-75 or 9-inch o.c. at the 4- FM-90 Base (Optional) Min. 1.5-Min. 0.75-inch All Weather / inch lap and 18-inch Existing sound Sheet Fastenerinch ACFoam II, FescoBoard (Optional) SBS-AA, Empire Base; o.c. in two (2), BP-AA or G-27.gypsum or or Twin Loc-Nail FlintBoard ISO, HA(homogeneous) or min. HABP-AA or SBS-TA or -45.0* Yosemite Venting equally spaced, SBS-AA gypsum plankAssembled ENRGY 3 or Multi-0.5-inch Structodek SBS-AAAPP-TA Basestaggered center Fastener(Field Max FA3High Density Fiberboard rows W/D > 100lbf) NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 64of 74 N EMO|etc. TABLE6B: GYPSUMDECKSREROOF(T EAR-O FF) SYSTEMTYPEA-2: MECHANICALLYATTACHEDANCHORSHEET,BONDEDINSULATION,BONDEDROOFCOVER Anchor SheetBase InsulationTop InsulationRoof Cover (Note 15) Deck System MDP Fasteners No.(psf) (Note1) TypeAttachTypeAttachTypeAttachBase PlyPlyCap Ply (Note 11) Glasbase; Flexiglas 6-inch o.c. at the 4- Min. 1.5-inch Min. 0.75-inch Base; Flintlastic Trufast Twin Loc-inch lap and 10-inch Existing sound ACFoam II, FescoBoard (Optional) SBS-AA, Base 20; All Nail Assembled o.c. in two (2),BP-AA or G-28.gypsum or FlintBoard ISO, HA(homogeneous) or min. HABP-AA or SBS-TA or -60.0 Weather / Empire Fastener (Field equally spaced, SBS-AA gypsum plankENRGY 3 or Multi-0.5-inch Structodek SBS-AAAPP-TA Baseor Yosemite W/D > 80lbf)staggered center Max FA3High Density Fiberboard Venting Baserows Glasbase; Flexiglas 7-inch o.c. at the 4- Min. 1.5-inch Min. 0.75-inch Base; Flintlastic Trufast Twin Loc-inch lap and 7-inch Existing sound ACFoam II, FescoBoard (Optional) SBS-AA, BP-AA or Base 20; All Nail Assembled o.c. in two (2), G-29.gypsum or FlintBoard ISO, HA(homogeneous) or min. HABP-AA or SBS-TA or -60.0 Weather / Empire Fastener (Field equally spaced, SBS-AA gypsum plankENRGY 3 or Multi-0.5-inch Structodek SBS-AAAPP-TA Base; Yosemite W/D > 69lbf)staggered center Max FA3High Density Fiberboard Venting Baserows TABLE6C: GYPSUMDECKSREROOF(T EAR-O FF) SYSTEMTYPEC: MECHANICALLYATTACHEDINSULATION,BONDEDROOFCOVER Top Insulation LayerRoof Cover (Note 15) Deck System Base Insulation Layer(s)MDP (psf) No. (Note1) TypeFasteners(Note 11)AttachBase PlyPlyCap Ply Existing sound (Optional) One or more Min. 0.5-inch Structodek (Optional) BP-AA, SBS-AA, BP-AA or SBS- 2 G-30.gypsum or layers, any combination, High Density Fiberboard GypTec Plate(Field W/D > 1801 per 2.0 ftSBS-AA, SBS-TA or SBS-TA or -45.0* AA gypsum plankloose laidRoof Insulationlbf)APP-TAAPP-TA Existing sound (Optional) One or more BP-AA, SBS-(Optional) BP-AA, SBS-AA, Min. 0.25-inch DensDeckor 2 G-31.gypsum or layers, any combination, GypTec Plate(Field W/D > 1601 per 1.8 ftAA, SBS-TA or SBS-AA, SBS-TA or SBS-TA or -45.0* DensDeckPrime gypsum plankloose laidlbf)APP-TAAPP-TAAPP-TA Existing sound (Optional) One or more Min. 0.5-inch Structodek (Optional) BP-AA, SBS-AA, Trufast Twin Loc-Nail Assembled BP-AA or SBS- 2 G-32.gypsum or layers, any combination, High Density Fiberboard 1 per 2.0 ftSBS-AA, SBS-TA or SBS-TA or -45.0* Fasteners (Field W/D > 180lbf)AA gypsum plankloose laidRoof InsulationAPP-TAAPP-TA Min. 0.25-inch DensDeckor Existing sound (Optional) One or more BP-AA, SBS-(Optional) BP-AA, SBS-AA, DensDeckPrime or Trufast Twin Loc-Nail Assembled 2 G-33.gypsum or layers, any combination, 1 per 2.0 ftAA, SBS-TA or SBS-AA, SBS-TA or SBS-TA or -45.0* SECUROCK Gypsum-Fiber Fasteners (Field W/D > 180lbf) gypsum plankloose laidAPP-TAAPP-TAAPP-TA Roof Board NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 65of 74 N EMO|etc. TABLE6D: GYPSUMDECKSREROOF(T EAR-O FF) SYSTEMTYPEE: MECHANICALLYATTACHEDBASESHEET,BONDEDROOFCOVER Base SheetRoof Cover (Note 15) Deck System MDP No.(psf) (Note1) BaseFasteners(Note 11)AttachBase PlyCap Ply S ELF-A DHERING S YSTEMS: Existing sound gypsum Trufast Twin Loc-Nail Assembled 6-inch o.c. at the 4-inch lap and 10-inch o.c. in two (2), G-34.Flintlastic SA NailBaseSBS-SASBS-SA-60.0 or gypsum plankFastener (Field W/D > 80lbf)equally spaced, staggered center rows Existing sound gypsum Trufast Twin Loc-Nail Assembled 9-inch o.c. at the 4-inch lap and 9-inch o.c. in two (2), G-35.Flintlastic SA NailBaseSBS-SASBS-SA-60.0 or gypsum plankFastener (Field W/D > 88lbf)equally spaced, staggered center rows C ONVENTIONAL S YSTEMS: Trufast FM-75 or FM-90 Base Existing sound gypsum All Weather / Empire Base; Sheet Fasteneror Twin Loc-Nail 9-inch o.c. at the 4-inch lap and 18-inch o.c. in two (2), BP-AA or SBS- G-36.SBS-AA-45.0* or gypsum plankYosemite Venting BaseAssembled Fastener(Field W/D > equally spaced, staggered center rowsAA 100lbf) Glasbase; Flexiglas Base; Flintlastic Existing sound gypsum Trufast Twin Loc-Nail Assembled 6-inch o.c. at the 4-inch lap and 10-inch o.c. in two (2), BP-AA or SBS-SBS-AA, SBS- Base 20; All Weather / Empire Base G-37.-60.0 or gypsum plankFastener (Field W/D > 80lbf)equally spaced, staggered center rowsAATA or APP-TA or Yosemite Venting Base Glasbase; Flexiglas Base; Flintlastic Existing sound gypsum Trufast Twin Loc-Nail Assembled 9-inch o.c. at the 4-inch lap and 9-inch o.c. in two (2), BP-AA or SBS-SBS-AA, SBS- G-38.Base 20; All Weather / Empire -67.5 or gypsum plankFastener (Field W/D > 100lbf)equally spaced,staggered center rowsAATA or APP-TA Base; Yosemite Venting Base NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 66of 74 N EMO|etc. TABLE7A: RECOVERAPPLICATIONS SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System MDP Substrate(Notes 1 & 12) AttachAttach No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) S ELF-A DHERING S YSTEMS: Min. 0.25-inch DensDeckprimed Existing fully bonded BUR or with FlintPrime or FlintPrime SA; or R-1HANoneN/ASBS-SA(Optional) SBS-SASBS-SA-105.0 modified bitumen roof coverSECUROCK Gypsum-Fiber Roof Board. Min. 0.25-inch DensDeckprimed Min. 1.5-inch ACFoam II, FlintBoard Existing fully bonded BUR or with FlintPrime or FlintPrime SA; or R-2ISO, ENRGY 3, H-Shield or Multi-HAHASBS-SA(Optional) SBS-SASBS-SA-105.0 modified bitumen roof coverSECUROCK Gypsum-Fiber Roof Max FA3 Board. Min. 0.25-inch DensDeckprimed Existing fully bonded, smooth with FlintPrime or FlintPrime SAor A-PD, 6- R-3surface BUR or modified NoneN/ASBS-SA(Optional) SBS-SASBS-SA-105.0 SECUROCK Gypsum-Fiber Roof inch o.c. bitumen Board Existing fully bonded, mineral Min. 0.25-inch SECUROCK Gypsum-A-PD, 6- R-4NoneN/ASBS-SA(Optional) SBS-SASBS-SA-172.5 surface modified bitumenFiber Roof Boardinch o.c. Existing fully bonded, mineral Min. 0.25-inch DensDeckprimed A-PD, 6- R-5NoneN/ASBS-SA(Optional) SBS-SASBS-SA-180.0 surface modified bitumenwith FlintPrime or FlintPrime SAinch o.c. Min. 0.25-inch DensDeckprimed Existing fully bonded, smooth Min. 1.5-inch ACFoam II, A-PD, 6-with FlintPrime or FlintPrime SAor A-PD, 6- R-6surface BUR or modified FlintBoard, ENRGY 3 or Multi-Max SBS-SA(Optional) SBS-SASBS-SA-52.5 inch o.c.SECUROCK Gypsum-Fiber Roof inch o.c. bitumenFA3 Board Min. 0.25-inch DensDeckprimed Existing fully bonded, mineral Min. 1.5-inch ACFoam II, A-PD, 6-A-PD, 6- with FlintPrime or FlintPrime SAor R-7surface BUR or modified FlintBoard, ENRGY 3 or Multi-Max SBS-SA(Optional) SBS-SASBS-SA-172.5 inch o.c.SECUROCK Gypsum-Fiber Roof inch o.c. bitumenFA3 Board Min. 0.25-inch DensDeckprimed Existing fully bonded BUR or Min. 1.5-inch ACFoam II, with FlintPrime or FlintPrime SAor R-8M-OSFAM-OSFASBS-SA(Optional) SBS-SASBS-SA-157.5 SECUROCK Gypsum-Fiber Roof modified bitumen roof coverFlintBoard, ENRGY 3 or H-Shield Board Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum- R-9or granule-surface BUR or M-PG1NoneN/ASBS-SA(Optional) SBS-SASBS-SA-172.5 Fiber Roof Board modified bitumen Existing fully bonded, smooth- Min. 0.25-inch DensDeckprimed or granule-surface BUR or R-10M-PG1NoneN/ASBS-SA(Optional) SBS-SASBS-SA-180.0 with FlintPrime or FlintPrime SA modified bitumen Existing fully bonded BUR or Min. 1.5-inch ACFoam II, Min. 0.25-inch SECUROCK Gypsum- R-11M-PG1M-PG1SBS-SA(Optional) SBS-SASBS-SA-172.5 modified bitumen roof coverFlintBoard, ENRGY 3 or H-ShieldFiber Roof Board NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 67of 74 N EMO|etc. TABLE7A: RECOVERAPPLICATIONS SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System MDP Substrate(Notes 1 & 12) AttachAttach No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Min. 1.5-inch ACFoam II, Existing fully bonded BUR or Min. 0.25-inch DensDeckprimed R-12FlintBoard, ENRGY 3 or Multi-Max M-PG1M-PG1SBS-SA(Optional) SBS-SASBS-SA-180.0 modified bitumen roof coverwith FlintPrime or FlintPrime SA FA Min. 0.25-inch DensDeckprimed Existing fully bonded, smooth- with FlintPrime or FlintPrime SAor R-13or granule-surface BUR or OB500NoneN/ASBS-SA(Optional) SBS-SASBS-SA-120.0 SECUROCK Gypsum-Fiber Roof modified bitumen Board Min. 0.25-inch DensDeckprimed Existing fully bonded BUR or Min. 1.5-inch ACFoam II, FlintBoard with FlintPrime or FlintPrime SAor R-14OB500OB500SBS-SA(Optional) SBS-SASBS-SA-120.0 modified bitumen roof coverISO or ENRGY 3SECUROCK Gypsum-Fiber Roof Board Existing fully bonded, smooth- or granule-surface BUR or Min. 0.25-inch SECUROCK Gypsum-ICP BOARD- R-15NoneN/ASBS-SA(Optional) SBS-SASBS-SA-172.5 granule-surface modified Fiber Roof BoardMAX bitumen Existing fully bonded, smooth- or granule-surface BUR or Min. 0.25-inch DensDeckprimed ICP BOARD- R-16NoneN/ASBS-SA(Optional) SBS-SASBS-SA-192.5 granule-surface modified with FlintPrime or FlintPrime SAMAX bitumen Existing fully bonded, smooth-Min. 1.0-inch ISO 95+ GL, H-Shield, or granule-surface BUR or H-Shield CG, ENRGY 3 or min. 1.3-ICP BOARD-Min. 0.25-inch SECUROCK Gypsum-ICP BOARD- R-17SBS-SA(Optional) SBS-SASBS-SA-172.5 granule-surface modified inch ACFoam III, Min. 1.5-inch MAXFiber Roof BoardMAX bitumenMulti-Max FA3 or Ultra-Max Existing fully bonded, smooth-Min. 1.0-inch ISO 95+ GL, H-Shield, ICP BOARD-Min. 0.25-inch DensDeckprimed ICP BOARD- or granule-surface BUR or H-Shield CG, ENRGY 3 or min. 1.3- R-18SBS-SA(Optional) SBS-SASBS-SA-192.5 granule-surface modified inch ACFoam III, Min. 1.5-inch MAXwith FlintPrime or FlintPrime SAMAX bitumenMulti-Max FA3 or Ultra-Max Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum- R-19or granule-surface BUR or CR-20NoneN/ASBS-SA(Optional) SBS-SASBS-SA-172.5 Fiber Roof Board modified bitumen Existing fully bonded, smooth- Min. 0.25-inch DensDeckprimed R-20or granule-surface BUR or CR-20NoneN/ASBS-SA(Optional) SBS-SASBS-SA-192.5 with FlintPrime or FlintPrime SA modified bitumen Min. 1.0-inch ISO 95+ GL, H-Shield, Existing fully bonded BUR or H-Shield CG, ENRGY 3 or min. 1.3-Min. 0.25-inch SECUROCK Gypsum- R-21CR-20CR-20SBS-SA(Optional) SBS-SASBS-SA-172.5 modified bitumen roof coverinch ACFoam III, Min. 1.5-inch Fiber Roof Board Multi-Max FA3 or Ultra-Max NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 68of 74 N EMO|etc. TABLE7A: RECOVERAPPLICATIONS SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System MDP Substrate(Notes 1 & 12) AttachAttach No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Min. 1.0-inch ISO 95+ GL, H-Shield, Existing fully bonded BUR or H-Shield CG, ENRGY 3 or min. 1.3-Min. 0.25-inch DensDeckprimed R-22CR-20CR-20SBS-SA(Optional) SBS-SASBS-SA-192.5 modified bitumen roof coverinch ACFoam III, Min. 1.5-inch with FlintPrime or FlintPrime SA Multi-Max FA3 or Ultra-Max H YBRID S YSTEMS: Existing fully bonded BUR or Min. 0.25-inch SECUROCK Gypsum-(Optional) SBS-AA, SBS-AA, SBS- R-23HANoneN/ASBS-SA-H-105.0 modified bitumen roof coverFiber Roof BoardSBS-TA, APP-TATA, APP-TA Existing fully bonded, smooth Min. 0.25-inch SECUROCK Gypsum-A-PD, 6-(Optional) SBS-AA, SBS-AA, SBS- R-24surface BUR or modified NoneN/ASBS-SA-H-105.0 Fiber Roof Boardinch o.c.SBS-TA, APP-TATA, APP-TA bitumen Existing fully bonded, mineral Min. 0.25-inch SECUROCK Gypsum-A-PD, 6-(Optional) SBS-AA, SBS-AA, SBS- R-25NoneN/ASBS-SA-H-180.0 surface modified bitumenFiber Roof Boardinch o.c.SBS-TA, APP-TATA, APP-TA Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum-(Optional) SBS-AA, SBS-AA, SBS- R-26or granule-surface BUR or M-PG1NoneN/ASBS-SA-H-180.0 Fiber Roof BoardSBS-TA, APP-TATA, APP-TA modified bitumen Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum-(Optional) SBS-AA, SBS-AA, SBS- R-27or granule-surface BUR or OB500NoneN/ASBS-SA-H-120.0 Fiber Roof BoardSBS-TA, APP-TATA, APP-TA modified bitumen Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum-ICP BOARD-(Optional) SBS-AA, SBS-AA, SBS- or granule-surface BUR or R-28NoneN/ASBS-SA-H-195.0 granule-surface modified Fiber Roof BoardMAXSBS-TA, APP-TATA, APP-TA bitumen Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum-(Optional) SBS-AA, SBS-AA, SBS- R-29or granule-surface BUR or CR-20NoneN/ASBS-SA-H-195.0 Fiber Roof BoardSBS-TA, APP-TATA, APP-TA modified bitumen C ONVENTIONAL S YSTEMS: 0.5-inch Structodek High Density (Optional) BP-AA, Existing fully bonded BUR or BP-AA, SBS-SBS-AA, SBS- R-30Fiberboard or min. 0.75-inch Fesco HANoneN/ASBS-AA, SBS-TA or -105.0 modified bitumen roof coverAATA or APP-TA Board (homogeneous)APP-TA 0.25-inch DensDeck, DensDeckBP-AA, SBS-(Optional) BP-AA, Existing fully bonded BUR or SBS-AA, SBS- R-31Prime or SECUROCK Gypsum-Fiber HANoneN/AAA, SBS-TA SBS-AA, SBS-TA or -105.0 modified bitumen roof coverTA or APP-TA Roof Boardor APP-TAAPP-TA Min. 0.5-inch Structodek High Min. 1.5-inch ACFoam II, FlintBoard (Optional) BP-AA, Existing fully bonded BUR or Density Fiberboard, Min. 0.75-inch BP-AA or SBS-AA, SBS- R-32ISO, ENRGY 3, H-Shield or Multi-HAHASBS-AA, SBS-TA or -105.0 modified bitumen roof coverFescoBoard (homogeneous) or Min. SBS-AATA or APP-TA Max FA3 APP-TA 0.5-inch DuraBoard (homogeneous) NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 69of 74 N EMO|etc. TABLE7A: RECOVERAPPLICATIONS SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System MDP Substrate(Notes 1 & 12) AttachAttach No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK Gypsum-BP-AA, SBS-(Optional) BP-AA, Existing fully bonded BUR or SBS-AA, SBS- R-33ISO, ENRGY 3, H-Shield or Multi-HAFiber Roof Board, DensDeck, HAAA, SBS-TA SBS-AA, SBS-TA or -105.0 modified bitumen roof coverTA or APP-TA Max FA3 DensDeckPrimeor APP-TAAPP-TA Existing fully bonded, smooth (Optional) BP-AA, Min. 0.5-inch Structodek High A-PD, 6-BP-AA, SBS-SBS-AA, SBS- R-34surface BUR or modified NoneN/ASBS-AA, SBS-TA or -105.0 Density Fiberboard inch o.c.AATA or APP-TA bitumenAPP-TA (Optional) BP-AA, Existing fully bonded, mineral Min. 0.5-inch Structodek High A-PD, 6-BP-AA, SBS-SBS-AA, SBS- R-35NoneN/ASBS-AA, SBS-TA or -180.0 surface modified bitumenDensity Fiberboard inch o.c.AATA or APP-TA APP-TA Existing fully bonded, smooth Min. 0.25-inch DensDeck, BP-AA, SBS-(Optional) BP-AA, A-PD, 6-SBS-AA, SBS- R-36surface BUR or modified DensDeckPrime or SECUROCK NoneN/AAA, SBS-TA SBS-AA, SBS-TA or -105.0 inch o.c.TA or APP-TA bitumenGypsum-Fiber Roof Boardor APP-TAAPP-TA Min. 0.25-inch DensDeck, BP-AA, SBS-(Optional) BP-AA, Existing fully bonded, mineral A-PD, 6-SBS-AA, SBS- R-37DensDeckPrime or SECUROCK NoneN/AAA, SBS-TA SBS-AA, SBS-TA or -180.0 surface modified bitumeninch o.c.TA or APP-TA Gypsum-Fiber Roof Boardor APP-TAAPP-TA Existing fully bonded, smooth (Optional) BP-AA, Min. 1.5-inch ACFoam II, FlintBoard A-PD, 6-Min. 0.5-inch Structodek High A-PD, 6-BP-AA or SBS-AA, SBS- R-38surface BUR or modified SBS-AA, SBS-TA or -52.5 ISO, ENRGY 3 or H-Shield inch o.c.Density Fiberboardinch o.c.SBS-AATA or APP-TA bitumenAPP-TA BP-AA or Existing fully bonded, smooth (Optional) BP-AA, Min. 2-inch ACFoam II, FlintBoard A-PD, 6-Min. 0.25-inch SECUROCK Gypsum-A-PD, 6-SBS-AA, SBS-AA, SBS- surface BUR or modified SBS-AA, SBS-TA or R-39-52.5 ISO, ENRGY 3 or H-Shieldinch o.c.Fiber Roof Board or DensDeckinch o.c.SBS-TA or TA or APP-TA bitumenAPP-TA APP-TA Existing fully bonded, mineral (Optional) BP-AA, Min. 1.5-inch ACFoam II, FlintBoard A-PD, 6-Min. 0.5-inch Structodek High A-PD, 6-BP-AA or SBS-AA, SBS- R-40surface BUR or modified SBS-AA, SBS-TA or -172.5 ISO, ENRGY 3 or H-Shield inch o.c.Density Fiberboardinch o.c.SBS-AATA or APP-TA bitumenAPP-TA BP-AA or Existing fully bonded, mineral (Optional) BP-AA, Min. 2-inch ACFoam II, FlintBoard A-PD, 6-Min. 0.25-inch SECUROCK Gypsum-A-PD, 6-SBS-AA, SBS-AA, SBS- R-41surface BUR or modified SBS-AA, SBS-TA or -172.5 SBS-TA or ISO, ENRGY 3 or H-Shieldinch o.c.Fiber Roof Board or DensDeckinch o.c.TA or APP-TA bitumenAPP-TA APP-TA (Optional) BP-AA, Existing fully bonded BUR or Min. 1.5-inch ACFoam II, FlintBoard Min. 0.5-inch Structodek High BP-AA or SBS-AA, SBS- R-42M-OSFAM-OSFASBS-AA, SBS-TA or -127.5 modified bitumen roof coverISO, ENRGY 3 or H-Shield Density FiberboardSBS-AATA or APP-TA APP-TA BP-AA or (Optional) BP-AA, Existing fully bonded BUR or Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK Gypsum-SBS-AA, SBS-AA, SBS- R-43M-OSFAM-OSFASBS-AA, SBS-TA or -157.5 modified bitumen roof coverISO, ENRGY 3 or H-Shield Fiber Roof Board or DensDeckSBS-TA or TA or APP-TA APP-TA APP-TA NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 70of 74 N EMO|etc. TABLE7A: RECOVERAPPLICATIONS SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System MDP Substrate(Notes 1 & 12) AttachAttach No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Existing fully bonded, smooth-(Optional) BP-AA, Min. 0.5-inch Structodek High BP-AA, SBS-SBS-AA, SBS- R-44or granule-surface BUR or M-PG1NoneN/ASBS-AA, SBS-TA or -180.0 Density FiberboardAATA or APP-TA modified bitumenAPP-TA Existing fully bonded, smooth-Min. 0.25-inch DensDeckPrime or BP-AA, SBS-(Optional) BP-AA, SBS-AA, SBS- R-45or granule-surface BUR or SECUROCK Gypsum-Fiber Roof M-PG1NoneN/AAA, SBS-TA SBS-AA, SBS-TA or -180.0 TA or APP-TA modified bitumenBoardor APP-TAAPP-TA (Optional) BP-AA, Existing fully bonded BUR or Min. 1.5-inch ACFoam II, FlintBoard Min. 0.5-inch Structodek High BP-AA or SBS-AA, SBS- R-46M-PG1M-PG1SBS-AA, SBS-TA or -180.0 modified bitumen roof coverISO, ENRGY 3 or H-Shield Density FiberboardSBS-AATA or APP-TA APP-TA BP-AA or (Optional) BP-AA, Existing fully bonded BUR or Min. 1.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK Gypsum-SBS-AA, SBS-AA, SBS- R-47M-PG1M-PG1SBS-AA, SBS-TA or -180.0 modified bitumen roof coverISO, ENRGY 3 or H-Shield Fiber Roof Board or DensDeckSBS-TA or TA or APP-TA APP-TA APP-TA Existing fully bonded, smooth-(Optional) BP-AA, Min. 0.5-inch Structodek High BP-AA, SBS-SBS-AA, SBS- R-48or granule-surface BUR or OB500NoneN/ASBS-AA, SBS-TA or -120.0 Density FiberboardAATA or APP-TA modified bitumenAPP-TA Existing fully bonded, smooth-BP-AA, SBS-(Optional) BP-AA, Min. 0.25-inch SECUROCK Gypsum-SBS-AA, SBS- R-49or granule-surface BUR or OB500NoneN/AAA, SBS-TA SBS-AA, SBS-TA or -120.0 Fiber Roof BoardTA or APP-TA modified bitumenor APP-TAAPP-TA (Optional) BP-AA, Existing fully bonded BUR or Min. 1.5-inch ACFoam II, FlintBoard Min. 0.5-inch Structodek High BP-AA or SBS-AA, SBS- R-50OB500OB500SBS-AA, SBS-TA or -120.0 modified bitumen roof coverISO, ENRGY 3 or H-Shield Density FiberboardSBS-AATA or APP-TA APP-TA Min. 0.25-inch SECUROCK Gypsum-BP-AA, SBS-(Optional) BP-AA, Existing fully bonded BUR or Min. 1.5-inch ACFoam II, FlintBoard SBS-AA, SBS- R-51OB500Fiber Roof Board, DensDeckor OB500AA, SBS-TA SBS-AA, SBS-TA or -120.0 modified bitumen roof coverISO, ENRGY 3 or H-Shield TA or APP-TA DensDeckPrimeor APP-TAAPP-TA Existing fully bonded, smooth-(Optional) BP-AA, Min. 0.5-inch Structodek High BP-AA, SBS-SBS-AA, SBS- R-52or granule-surface BUR or CR-20NoneN/ASBS-AA, SBS-TA or -195.0 Density FiberboardAATA or APP-TA modified bitumenAPP-TA Existing fully bonded, smooth- BP-AA, SBS-(Optional) BP-AA, or granule-surface BUR or Min. 0.25-inch SECUROCK Gypsum-ICP BOARD-SBS-AA, SBS- R-53NoneN/AAA, SBS-TA SBS-AA, SBS-TA or -195.0 granule-surface modified Fiber Roof BoardMAXTA or APP-TA or APP-TAAPP-TA bitumen Existing fully bonded, smooth-Min. 1.0-inch ISO 95+ GL, H-Shield, or granule-surface BUR or H-Shield CG, ENRGY 3 or min. 1.3-ICP BOARD-Min. 0.25-inch DensDeckor ICP BOARD- R-54SBS-TA(Optional) SBS-TASBS-TA-180.0 granule-surface modified inch ACFoam III, Min. 1.5-inch MAXDensDeckPrimeMAX bitumenMulti-Max FA3 or Ultra-Max NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 71of 74 N EMO|etc. TABLE7A: RECOVERAPPLICATIONS SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System MDP Substrate(Notes 1 & 12) AttachAttach No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Existing fully bonded, smooth-Min. 1.0-inch ISO 95+ GL, H-Shield, Min. 0.5-inch Structodek High (Optional) BP-AA, or granule-surface BUR or H-Shield CG, ENRGY 3 or min. 1.3-ICP BOARD-Density Fiberboard or DuraBoard ICP BOARD-BP-AA or SBS-AA, SBS- R-55SBS-AA, SBS-TA or -180.0 granule-surface modified inch ACFoam III, Min. 1.5-inch MAX(homogeneous) or min. 1.5-inch MAXSBS-AATA or APP-TA APP-TA bitumenMulti-Max FA3 or Ultra-Max FescoBoard (laminated) Existing fully bonded, smooth-Min. 1.0-inch ISO 95+ GL, H-Shield, (Optional) BP-AA, or granule-surface BUR or H-Shield CG, ENRGY 3 or min. 1.3-ICP BOARD-Min. 0.25-inch SECUROCK Gypsum-ICP BOARD-BP-AA or SBS-AA, SBS- R-56SBS-AA, SBS-TA or -225.0 granule-surface modified inch ACFoam III, Min. 1.5-inch MAXFiber Roof BoardMAXSBS-AATA or APP-TA APP-TA bitumenMulti-Max FA3 or Ultra-Max Existing fully bonded, smooth-Min. 1.0-inch ISO 95+ GL, H-Shield, ICP BOARD-Min. 0.25-inch SECUROCK Gypsum-ICP BOARD-SBS-TA or (Optional) SBS-TA SBS-TA or or granule-surface BUR or H-Shield CG, ENRGY 3 or min. 1.3- R-57-232.5 granule-surface modified inch ACFoam III, Min. 1.5-inch MAXFiber Roof BoardMAXAPP-TAor APP-TAAPP-TA bitumenMulti-Max FA3 or Ultra-Max Existing fully bonded, smooth-Min. 1.0-inch ISO 95+ GL, H-Shield, (Optional) BP-AA, or granule-surface BUR or H-Shield CG, ENRGY 3 or min. 1.3-ICP BOARD-ICP BOARD-BP-AA or SBS-AA, SBS- R-58Min. 0.25-inch DensDeckSBS-AA, SBS-TA or -240.0 granule-surface modified inch ACFoam III, Min. 1.5-inch MAXMAXSBS-AATA or APP-TA APP-TA bitumenMulti-Max FA3 or Ultra-Max Existing fully bonded, smooth-BP-AA, SBS-(Optional) BP-AA, Min. 0.25-inch SECUROCK Gypsum-SBS-AA, SBS- R-59or granule-surface BUR or CR-20NoneN/AAA, SBS-TA SBS-AA, SBS-TA or -195.0 Fiber Roof BoardTA or APP-TA modified bitumenor APP-TAAPP-TA Min. 1.0-inch ISO 95+ GL, H-Shield, Existing fully bonded BUR or H-Shield CG, ENRGY 3 or min. 1.3-Min. 0.25-inch DensDeckor R-60CR-20CR-20SBS-TA(Optional) SBS-TASBS-TA-180.0 modified bitumen roof coverinch ACFoam III, Min. 1.5-inch DensDeckPrime Multi-Max FA3 or Ultra-Max Min. 1.0-inch ISO 95+ GL, H-Shield, Min. 0.5-inch Structodek High (Optional) BP-AA, Existing fully bonded BUR or BP-AA or SBS-AA, SBS- H-Shield CG, ENRGY 3 or min. 1.3-Density Fiberboard or DuraBoard R-61CR-20CR-20SBS-AA, SBS-TA or -180.0 modified bitumen roof coverinch ACFoam III, Min. 1.5-inch (homogeneous) or min. 1.5-inch SBS-AATA or APP-TA APP-TA Multi-Max FA3 or Ultra-Max FescoBoard (laminated) Min. 1.0-inch ISO 95+ GL, H-Shield, (Optional) BP-AA, Existing fully bonded BUR or H-Shield CG, ENRGY 3 or min. 1.3-Min. 0.25-inch SECUROCK Gypsum-BP-AA or SBS-AA, SBS- R-62CR-20CR-20SBS-AA, SBS-TA or -225.0 modified bitumen roof coverinch ACFoam III, Min. 1.5-inch Fiber Roof BoardSBS-AATA or APP-TA APP-TA Multi-Max FA3 or Ultra-Max Min. 1.0-inch ISO 95+ GL, H-Shield, Existing fully bonded BUR or H-Shield CG, ENRGY 3 or min. 1.3-Min. 0.25-inch SECUROCK Gypsum-SBS-TA or (Optional) SBS-TA SBS-TA or R-63CR-20CR-20-232.5 modified bitumen roof coverinch ACFoam III, Min. 1.5-inch Fiber Roof BoardAPP-TAor APP-TAAPP-TA Multi-Max FA3 or Ultra-Max NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 72of 74 N EMO|etc. TABLE7A: RECOVERAPPLICATIONS SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System MDP Substrate(Notes 1 & 12) AttachAttach No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Min. 1.0-inch ISO 95+ GL, H-Shield, (Optional) BP-AA, Existing fully bonded BUR or H-Shield CG, ENRGY 3 or min. 1.3-BP-AA or SBS-AA, SBS- R-64CR-20Min. 0.25-inch DensDeckCR-20SBS-AA, SBS-TA or -240.0 modified bitumen roof coverinch ACFoam III, Min. 1.5-inch SBS-AATA or APP-TA APP-TA Multi-Max FA3 or Ultra-Max C OLD-A PPLIED S YSTEMS: (Optional) Min. 0.5-inch ACFoam II, Min. 1.5-inch ACFoam III, FlintBoard Existing fully bonded BUR or FlintBoard ISO, H-Shield, FlintBoard Iso Cold, H-Shield CG or FlintBoard R-65OB500OB500SBS-CA1NoneSBS-CA1-82.5 modified bitumen roof cover ISOIso Cold HH (Optional) Min. 0.5-inch ACFoam II, Min. 1.5-inch ACFoam III, FlintBoard Existing fully bonded BUR or R-66FlintBoard ISO, H-Shield, FlintBoard CR-20Iso Cold, H-Shield CG or FlintBoard CR-20SBS-CA1NoneSBS-CA1-82.5 modified bitumen roof cover ISOIso Cold HH Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum-A-PD, 6- or granule-surface BUR or R-67NoneN/ASBS-CA1NoneSBS-CA1-105.0 Fiber Roof Boardinch o.c. modified bitumen Existing fully bonded, smooth Min. 0.5-inch ACFoam II, FlintBoard A-PD, 6-Min. 0.25-inch SECUROCK Gypsum-A-PD, 6- R-68surface BUR or modified SBS-CA1NoneSBS-CA1-52.5 ISO, H-Shield, FlintBoard ISOinch o.c.Fiber Roof Boardinch o.c. H bitumen Existing fully bonded, mineral Min. 0.5-inch ACFoam II, FlintBoard A-PD, 6-Min. 0.25-inch SECUROCK Gypsum-A-PD, 6- surface BUR or modified R-69SBS-CA1NoneSBS-CA1-105.0 ISO, H-Shield, FlintBoard ISOinch o.c.Fiber Roof Boardinch o.c. H bitumen Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum- R-70or granule-surface BUR or M-PG1NoneN/ASBS-CA1NoneSBS-CA1-105.0 Fiber Roof Board modified bitumen Existing fully bonded, mineral Min. 0.5-inch ACFoam II, FlintBoard M-OSFA, Min. 0.25-inch SECUROCK Gypsum-M-OSFA, surface BUR or modified R-71SBS-CA1NoneSBS-CA1-105.0 ISO, H-Shield, FlintBoard ISOM-PG1Fiber Roof BoardM-PG1 H bitumen Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum- R-72or granule-surface BUR or OB500NoneN/ASBS-CA1NoneSBS-CA1-105.0 Fiber Roof Board modified bitumen Existing fully bonded, mineral Min. 0.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK Gypsum- surface BUR or modified R-73OB500OB500SBS-CA1NoneSBS-CA1-105.0 ISO, H-Shield, FlintBoard ISOFiber Roof Board H bitumen Existing fully bonded, smooth- (Optional) Min. 0.5-inch ACFoam II, or granule-surface BUR or ICP BOARD-Min. 0.25-inch SECUROCK Gypsum-ICP BOARD- R-74FlintBoard ISO, H-Shield, FlintBoard SBS-CA1NoneSBS-CA1-105.0 granule-surface modified MAXFiber Roof BoardMAX ISO H bitumen NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 73of 74 N EMO|etc. TABLE7A: RECOVERAPPLICATIONS SYSTEMTYPEA-1: BONDEDINSULATION,BONDEDROOFCOVER Base Insulation LayerTop Insulation LayerRoof Cover (Note 15) System MDP Substrate(Notes 1 & 12) AttachAttach No.(psf) TypeTypeBase PlyPlyCap Ply (Notes 6,7,8)(Notes 6,7,8) Existing fully bonded, smooth- Min. 0.25-inch SECUROCK Gypsum- R-75or granule-surface BUR or CR-20NoneN/ASBS-CA1NoneSBS-CA1-105.0 Fiber Roof Board modified bitumen Existing fully bonded, mineral Min. 0.5-inch ACFoam II, FlintBoard Min. 0.25-inch SECUROCK Gypsum- R-76surface BUR or modified CR-20CR-20SBS-CA1NoneSBS-CA1-105.0 ISO, H-Shield, FlintBoard ISOFiber Roof Board H bitumen TABLE7B: RECOVERAPPLICATIONSNEWCONSTRUCTION OR REROOF(T EAR-O FF) SYSTEMTYPEF:NON-INSULATED,BONDEDROOFCOVER Roof Cover (Note 15) Substrate System PrimerMDP (psf) No. (Notes 1 & 12) Base PlyPlyCap Ply R-77Existing fully bonded BUR over structural concretedeck(Optional) FlintPrimeSBS-CA1NoneSBS-CA1-187.5 NEMO ETC, LLC Evaluation Report 3520.03.04-R24for FL2533-R24 TH Certificate of Authorization #32455 7EDITION (2020) FBC NON-HVHZ EVALUATION Revision 25: 07/20/2020 ©2019 NEMO ETC, LLC CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 893-5400 Appendix 1, Page 74of 74 N EMO|etc. Certificate of Authorization #32455 353 Christian Street, Unit #13 Oxford, CT 06478 (203) 262-9245 E NGINEER E VALUATE T EST C ONSULT January 1, 2020 RE: Certification of Independence, Florida F.A.C.Rule 61G20-3 To Whom It May Concern: This letter serves to document the following in accordance with Florida F.A.C.Rule 61G20-3: 1.NEMO ETC, LLCdoes not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or distributing products it evaluates. 2.NEMO ETC, LLCis not owned, operated or controlled by any company manufacturing or distributing products it evaluates. 3.Robert Nieminen, P.E.does not have nor will acquire, a financial interest in any company manufacturing or distributing products for which the evaluation reports are being issued. 4.Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the product. 5.Building Code Evaluations issued by NEMO|etc.and Robert Nieminen, P.E. are not, in any way, to be construed to mean or imply that NEMO|etc.or Robert Nieminen, P.E. are the Designer of Record for any projecton which the Evaluation Report is/was used for permitting or design guidance unless retained specifically for that purpose on a given project. Please contact our office with any questions. Robert Nieminen, P.E. President Florida Reg. No. 59166 NEMO ETC, LLC PHONE:(203) 262-9245 FAX:(203) 262-9243 www.nemoetc.com