PLANS
GULLWING
G 18 AREA LUMINAIRES
SPECIFICATIONS
GENERAL DESCRIPTION: The Gardco Gullwing is an area luminaire
defined by its sleek profile and rugged construction. The housing is one-
piece, diecast aluminum and mounts directly to a pole or wall without the
need of a separate support arm. The multifaceted arc-image duplicating
optical systems provide IES Types I, II, III, IV and V distributions. The door
frame is single-piece diecast aluminum and retains an optically clear
tempered flat glass lens. The luminaire is completely sealed and gasketed
preventing intrusion from moisture, dust and insects. The Gullwing
luminaires are finished with a fade and abrasion resistant TGIC
powdercoat.
HOUSING: A one-piece diecast aluminum housing mounts directly to a
pole or wall without the need for a support arm. The low profile rounded
form reduces the effective projected area of the luminaire to only
1.2ft'/.11 m'.
LENS ASSEMBLY: A single-piece diecast aluminum lens frame hinges
down from the housing and is secured by a stainless steel lanyard and
hinge pin.
An optically clear, heat and impact resistant tempered flat glass lens is
mechanically secured with eight retainers. The electrical and optical
chambers are thoroughly sealed with a one-piece memory retentive hollow-
core EPDM gasket to prevent intrusion by moisture, dust, and insects.
OPTICAL SY.!)TEMS: The segmented optical systems are
manufactured from homogenous sheet aluminum which has been
electrochemically brightened, anodized and sealed. The multifaceted
arc image duplicating systems are designed to prod uce IES Types I
(1). II (2XL), III (3XL), IV (4XL), and V (Q). With the 2XL, 3XL and 4XL
luminaries, the reflector facets form a conical fan around the arc tube
with each facet positioned to be precisely tangent to the top of the arc
tube.
The lampholder is glazed porcelain with a nickel plated screw shell.
Position-oriented mogul base sockets to accept high output horizontal
metal halide lamps are supplied standard,
Fluorescent luminaires use a Medium Throw reflector with a Solite@ glass
lens (MTS).
ELECTRICAL: All electrical components are UL recognized, factory
tested, and mounted on a unitized plate with quick electrical disconnects.
Each high power factor ballast is the separate component type capable
of providing reliable lamp starting down to
-20oF / -290C. Standard fluorescent ballasts are solid state.
FINISH: Each standard color luminaire receives a fade and abrasion
resistant, electrostatically applied, thermally cured, triglycidal isocyanurate
(TGIC) textured polyester powdercoat finish. Standard colors include
bronze (BRP), black (BLP), white (WP), and natural aluminum (NP).
Consult factory for specs on optional or custom colors.
LABELS: All fixtures bear UL or CUL (where applicable) Wet Location
labels.
DIMENSIONS
..
:1
:1
:1
1
1.2 ft'
,11 m'
EPA
g
2,4 ft2
,22 m'
~ Archffect CorPOGOt1ro
r\1',' r.;.r~~I;""~ ~ il-:u' NOr ftnO<;IfQfil,~1
~; 11'!,v-!-~~",.J"'\""-'~ ......."""'"
;'"; '.. u;~,,'~d as !~o~~dJ
Ll..;,; ~'r-'- '
3-4
3.2 ft'
,30m'
., 'If:t,' "'~'\'IO'" I'" f'< """"iiCi;'l:';::?,'?lJ','=~' "",", ,'',In ',;"",
J.".,,'....~.."~.."-'>'/l~ / /~/,: /
"." A It '.l~ '(.l j, .0..:, ,.,.. / "'" . 'r' .=,--
: - ,r /~/ './'
. /
J
Gardeo Lighting
1611 Clovis Barker Road,
San Marcos, TX 78666
~
LIGHTING
79115,85/0306
Gardco Lighting reserves the right to change materials or modify the design of its product without
noti/ication as part of the company's continuing product improvement program. The Gutlwing design is
protected by U.S. patent number DES.391.6S9. The XL optical system is protected by U.S. patent number
5690422,
@ Copyright Gardea Lighting 2001-2006. All Rights Reserved. International Copyright Secured.
Genlyte Group
(800) 227-0758
(512) 753-1000
FAX: (512) 753-7855
www.sitelighting.com
I Notes
GULLWING
G 18 AREA LUMINAIRES
Job:
Type:
GENERAL DESCRIPTION: The Gardco Gullwing is an area luminaire defined by its sleek profile and rugged construction. The housing is one-piece,
diecast aluminum and mounts directly to a pole or wall without the need of a separate support arm. The multifaceted arc-image duplicating optical systems
provide IES Types I, II, III, IV and V distributions. The door frame is single-piece diecast aluminum and retains an optically clear tempered flat glass lens,
The luminaire is completely sealed and gasketed preventing intrusion from moisture, dust and insects. The Gullwing luminaires are finished with a fade and
abrasion resistant TGIC powdercoat.
. . .
PREFIX
DISTRIBUTION
FINISH
OPTIONS
CONFIGURATION
WATTAGE
VOLTAGE
Enter the order code into the appropriate box above, Note: Gardco reserves the right to refuse a configuration. Not all combinations and configurations are valid.
Refer to notes below for exclusions and limitations, For questions or concerns, please consult the factory,
PREFIX
18" Gullwing Luminaire
CONFIGURATION
G18
DISTRIBUTION
1
2
2@90
3
Single Assembly
Twin Assembly
Twin Assembly at 90"
Triple at 90"
3@120 Triple at 120"
Not available with PTF Option
4 Quad Assembly
W Wall Mount. Recessed J-Box
WS Wall Mount, Surface Conduit
2XL
3XL
4XL
Q
MTS
Type I, Horizontal Lamp (N/A above 400w)
Type II, Horizontal Lamp
Type III, Horizontal Lamp
Type IV, Horizontal Lamp
Type V, Horizontal Lamp (N/A above 400w)
Medium Throw with Solite Lens (Fluorescent only)
VOLTAGE
120
208
240
277
347
480
FINISH
BRP
BLP
WP
NP
OC
SC
100MH'
150MH'
175MH
250MH
400MH'
1000MH2,6
250PSMH'
320PSMH'
350PSMH
400PSMH','
750PSMW,7
875PSMW
1000PSMH2,9
150HPS
250HPS
400HPS
600HPS
750HPS'
MTS Doties Dnlv
(2)60CF
(2)85CF
(2)120CF
I. ReqUires ED28 or BT28 reduced
jacketed lamp
2. Furnished with sag glass lens only
3. Venture mogul base lamps required
4. M1380rM153
5, M132 or MI54
6, M1350rMI55
7. M149 only. Requires
MS750/PSIBU.HORIBT37 lamp.
MH Metal Halide
PSMH Pulse Start Metal Halide
HPS High Pressure Sodium
Fusing In Head
NIA with 750w and 1000w
G18 with FJuorescentis 120V
THROUGH 277V only. Not available
with 347V or 4BOV
Notes 8 and 9:
For 1000 Metal Halide, Use:
B1:MHJ Product Code Catalao Number
Venture 53702 MS1000W/HORIBT37/3K
G.E. 18205 MVR1000AJIBT37
Venture 15332 MH1000WAJIBT37
For 1000 Pulse Start, use:
Brand Product Code CatalDO Number
G.E. 10389 MVR1000IUIBT37IPA
Venture 49111 MS1000W/HORff25/PS
WARNING: Use of other lamps voids warranty
F
In-Line/ln-Pole Fusing
Photo control and Receptacle
NIA with 480V
Photocontrol Receptacle only
Polycarbonate Sag Lens (250w maxi
Internal Houseside Shield
Quartz Standby (400w maxi
Sag Glass Lens In lieu of flat glass
Supptied standard with 750w and 1000w
Square Pole Top Fitter
3" Round Pole Adapter
Required for 3" OD round Of tapered round
poles where top 00 is Jess than 4.
.. .
Bronze Paint
Black' Paint
White Paint
Natural Aluminum Paint
Optional Color Paint
Specify RAL designation as shown
ex: OC.RAL7024
LF
PC
PCR
POLY
HS
QS
SG
Special Color Paint
Specify Must supply c%r chip,
SQPTF
RPA1
RPA2
4" and 5" Round Pole Adapter
Required for 4".5" OD round poles
Pole Top Fitter - 2 3/8" Dia, Tenon
Pole Top Fitter - 3-3 1/2" Dia. Tenon
Pole Top Fitter - 3 1/2-4" Dia. Tenon
.. PTF nla with 120" mounting configurations
Single Transition
Twin Transition
....Mounts to a 2-3/8" Top Tenon. Sprcify a pole with
4.50" OD for a smooth transition
Mast Arm Fitter
Slips over a standard 2-3/8" davit arm
PTF2.
PTF3*
PTF4*
TR1*.
TR2*.
MF
(800) 227-0758
(512) 753-1000
FAX: (512) 753-7855
www.sitelighting.com
~
LIGHTING
79115-8510306
Gardeo Lighting reserves the right to change materials or modify the design 01 its product without
notification as part of the company's continuing product improvement program. The Gullwing design is
protected by U.S. patent number DES.391.659. The XL optical system is protected by U.S. patent
number 5690422.
@Copyright Gardea Lighting 2001-2006. All Rights Reserved. International Copyright Secured.
Genlyte Group
Gardeo Lighting
1611 Clovis Barker Road,
San Marcos, TX 78666
@
2J2"x5" HAND
HOLE wi NON-
CONDUCTIVE
DOOR.
@
2%" CABLE ACCESS
HOLES, 2 AT 180'
~..~~~~~c l.," - .
~~~...ii , Ql\lPOSITE
:(.~i M/xrERIAl.S
~~..~~~ TECH"lOLOCiY
~-~;g~
(2%"
TENON
L
4"
!
12" STD
8'-0"
5'-6"
Composite Materials Technology
5883 Glenridge Drive, Suite 160
Atlanta, GA 30328
404-843-8340
www.crntpoles.com
QUANTITY:
QUOTE: 102006el009
REV. DATE BY
20'-0'
7'-0"
MARATHON
ORIENTATION VIEWED
FROM TOP OF POLE
5
27'-0"
4,5
i jiJ.'rcrlfect CC~'M~i~;(,'
r",. {.f"""","'-'J"~~; r '," ,n", \' ;),.;,".;
~: r''''4 >"~f<~'" ~ ,\I r.1"'~' ~ ....-1, '1........ \ -
t:Jll~j;if~::;l!/~; O~ !~~t:Yf;~~.:
:o;:;:~':;?~~
COLOR: TO BE SPECIFIED
MIRAFLOR AT BOYNTON BEACH
CAT. NO.: T827-C-50-0-HS- T238
SPECS: WIND VEL.: 140 MPH
TOT. LENGTH: 27'-0" LUM. WEIGHT: 50 Ibs.
EMBED. DEPTH: 7' -0" LUM. EPA: 2.5 sq.ft.
TIP DIA: 3.70" STATIC DEFL.:
WEIGHT: Ibs. TOTAL DEFL.:
DRAWN BY: octo, DATE: 10 20 2006